RSS260-I2-D-LSTM12-8-0,25M Schmersal Electronic Components


Part#:RSS260-I2-D-LSTM12-8-0,25M
Alt. Part#:103014732
Manufacturer:Schmersal
Category:Electronic Components
Product Lifecycle:Active
Product description
Safety sensors; Electronic safety sensors; 8-pole connector M12; Coding level "High" according to ISO 14119; Simple mounting without additional angle; Individual coding with RFID technology; Frontal and lateral actuation enabled; RFID-technology for needs
Product Details
- Current, Utilisation category DC13 0.05 A
- Current leakage Ir 0.5 mA
- Current, Utilisation category DC12 0.05 A
- Voltage, Utilisation category DC13 24 VDC
- Voltage, Utilisation category DC12 24 VDC
- Voltage drop Ud, maximum 2 V
- Rated operating voltage 24 VDC -15% / +10%
- Switching frequency, approx. 1 Hz
- Required rated short-circuit current to EN 60947-5-1 100 A
- Versions p-type
- No-load supply current I0 100 mA
- Rated operating voltage, maximum 26.4 VDC
- Operating current 50 mA
- Degree of pollution to VDE 0100 3
- Voltage type DC (direct current)
- Restistance to shock 30 g / 11 ms
- Resistance to vibrations to EN 60068-2-6 10 … 55 Hz, amplitude 1 mm
- Overvoltage category III
- Rated operating voltage, minimum 20.4 VDC
- Storage and transport temperature, maximum +85 °C
- Rated impulse withstand voltage Uimp 0.8 kV
- Rated insulation voltage Ui 32 VDC
- Degree of protection IP65 to EN 60529, IP67 to EN 60529
- Ambient temperature, minimum -25 °C
- Terminal Connector Connector M8, 8-pole
- Width of sensor 39.2 mm
- Ambient temperature, maximum +65 °C
- Storage and transport temperature, minimum -25 °C
- Ensured switching distance OFF, front 18 mm
- Height of sensor 18 mm
- Ensured switching distance ON, front 10 mm
- Length of sensor 29.5 mm
- Note The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
- Ensured switch distance OFF Sar, lateral 15 mm
- Ensured switching distance ON, side 6 mm
- Hysteresis (Switch distance), maximum 2 mm
- Repeat accuracy R R 0.5 mm
- Mounting A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
- Actuating panels lateral, front side
- Duration of risk, maximum 200 ms
- Number of poles 8
- Safety functions Yes
- Short-circuit recognition Yes
- Reaction time, maximum 100 ms
- Active area lateral, front
- Short circuit detection Yes
- Time to readiness, maximum 2,000 ms
- Gross weight 161 g
- Enclosure material Plastic, thermoplastic, self-extinguishing
- Coding level according to ISO 14119 High
- Standards IEC 60947-5-3
- Active principle RFID
- general information Individual coding, multiple teaching
- Installation conditions (mechanical) not flush
- Housing construction form Block
- Interfering radiation IEC 61000-6-4
- EMC rating IEC 60947-3
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
RSS260-I2-D-LSTM12-8-0,25M Related Documents
Manufacturer warranty
RSS260-I2-D-LSTM12-8-0,25M Schmersal
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare RSS260-I2-D-LSTM12-8-0,25M with other products
Current, Utilisation cate...
Current leakage Ir
Current, Utilisation cate...
Voltage, Utilisation cate...
Voltage, Utilisation cate...
Voltage drop Ud, maximum
Rated operating voltage
Switching frequency, appr...
Required rated short-circ...
Versions
No-load supply current I0
Rated operating voltage, ...
Operating current
Degree of pollution to VD...
Voltage type
Restistance to shock
Resistance to vibrations ...
Overvoltage category
Rated operating voltage, ...
Storage and transport tem...
Rated impulse withstand v...
Rated insulation voltage ...
Degree of protection
Ambient temperature, mini...
Terminal Connector
Width of sensor
Ambient temperature, maxi...
Storage and transport tem...
Ensured switching distanc...
Height of sensor
Ensured switching distanc...
Length of sensor
Note
Ensured switch distance O...
Ensured switching distanc...
Hysteresis (Switch distan...
Repeat accuracy R R
Mounting
Actuating panels
Duration of risk, maximum
Number of poles
Safety functions
Short-circuit recognition
Reaction time, maximum
Active area
Short circuit detection
Time to readiness, maximu...
Gross weight
Enclosure material
Coding level according to...
Standards
Active principle
general information
Installation conditions (...
Housing construction form
Interfering radiation
EMC rating
Rated operating current (...
Protection rating
Material temperature resi...
Material temperature resi...
Note (Repeat accuracy R)
Number of fail-safe digit...
Diagnostic output
Output current, (fail-saf...
Material temperature resi...
Ensured switch distance O...
Ensured switch distance O...
Switch distance
Number of semi-conductor ...
Number of LEDs
Cascadable
Integral System Diagnosti...
Sensor topology
Current, Utilisation cate...
Switching principle
Switching element
Thermal test current
Voltage, Utilisation cate...
Cable section, maximum
Cable entry
Cable section, minimum
Actuating speed, maximum
Positive break force, min...
positive break travel
Mechanical life, minimum
Number of cable glands
Material of the contacts,...
Latching force
Number of safety contacts
Number of auxiliary conta...
Selected product

RSS260-I2-D-LSTM12-8-0,25M
Schmersal
Safety sensors; Electronic safety sensors; 8-pole connector M12; Coding level "High" according to IS...
Current, Utilisation category DC130.05 A
Current leakage Ir0.5 mA
Current, Utilisation category DC120.05 A
Voltage, Utilisation category DC1324 VDC
Voltage, Utilisation category DC1224 VDC
Voltage drop Ud, maximum2 V
Rated operating voltage24 VDC -15% / +10%
Switching frequency, approx.1 Hz
Required rated short-circuit current to EN 60947-5-1100 A
Versionsp-type
No-load supply current I0100 mA
Rated operating voltage, maximum26.4 VDC
Operating current50 mA
Degree of pollution to VDE 01003
Voltage typeDC (direct current)
Restistance to shock30 g / 11 ms
Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm
Overvoltage categoryIII
Rated operating voltage, minimum20.4 VDC
Storage and transport temperature, maximum+85 °C
Rated impulse withstand voltage Uimp0.8 kV
Rated insulation voltage Ui32 VDC
Degree of protectionIP65 to EN 60529, IP67 to EN...
Ambient temperature, minimum-25 °C
Terminal ConnectorConnector M8, 8-pole
Width of sensor39.2 mm
Ambient temperature, maximum+65 °C
Storage and transport temperature, minimum-25 °C
Ensured switching distance OFF, front18 mm
Height of sensor18 mm
Ensured switching distance ON, front10 mm
Length of sensor29.5 mm
NoteThe cable section of the int...
Ensured switch distance OFF Sar, lateral15 mm
Ensured switching distance ON, side6 mm
Hysteresis (Switch distance), maximum2 mm
Repeat accuracy R R0.5 mm
MountingA 20 mm screw length usually...
Actuating panelslateral, front side
Duration of risk, maximum200 ms
Number of poles8
Safety functionsYes
Short-circuit recognitionYes
Reaction time, maximum100 ms
Active arealateral, front
Short circuit detectionYes
Time to readiness, maximum2,000 ms
Gross weight161 g
Enclosure materialPlastic, thermoplastic, self...
Coding level according to ISO 14119High
StandardsIEC 60947-5-3
Active principleRFID
general informationIndividual coding, multiple ...
Installation conditions (mechanical)not flush
Housing construction formBlock
Interfering radiationIEC 61000-6-4
EMC ratingIEC 60947-3
Rated operating current (safety outputs)-
Protection rating-
Material temperature resistance of the cable (in motion), minimum-
Material temperature resistance (long-term), maximum-
Note (Repeat accuracy R)-
Number of fail-safe digital outputs-
Diagnostic output-
Output current, (fail-safe output), maximum-
Material temperature resistance of the cable (at rest), minimum-
Ensured switch distance ON Sao-
Ensured switch distance OFF Sar-
Switch distance-
Number of semi-conductor outputs with signaling function-
Number of LEDs-
Cascadable-
Integral System Diagnostics, status-
Sensor topology-
Current, Utilisation category AC-15-
Switching principle-
Switching element-
Thermal test current-
Voltage, Utilisation category AC15-
Cable section, maximum-
Cable entry-
Cable section, minimum-
Actuating speed, maximum-
Positive break force, minimum-
positive break travel-
Mechanical life, minimum-
Number of cable glands-
Material of the contacts, electrical-
Latching force-
Number of safety contacts-
Number of auxiliary contacts-
About the manufacturer

Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.
Recently viewed products
Relevant products
FAQ
Out if stock but available for backorder.
Safety sensors; Electronic safety sensors; 8-pole connector M12; Coding level "High" according to ISO 14119; Simple mounting without additional angle; Individual coding with RFID technology; Frontal and lateral actuation enabled; RFID-technology for needs
Similar products from: Electronic Components
What can I help you find today?