RSS 36-D-ST Schmersal Electronic Components

Product Details

• Interfering radiation
  IEC 61000-6-4
• EMC rating
  IEC 60947-3
• Current, Utilisation category DC12
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC13
  0.05 A
• Versions
  p-type
• Voltage drop Ud, maximum
  2 V
• Current leakage Ir
  0.5 mA
• Rated operating current (safety outputs)
  250 mA
• Operating current
  600 mA
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Rated operating voltage, minimum
  20.4 VDC
• Voltage type
  DC (direct current)
• Rated operating voltage
  24 VDC −15 % / +10 %
• No-load supply current I0
  100 mA
• Protection rating
  III
• Overvoltage category
  III
• Restistance to shock
  30 g / 11 ms
• Material temperature resistance of the cable (in motion), minimum
  -10 °C
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 1 mm
Material temperature resistance (long-term), maximum
+105 °C
Degree of protection
IP65 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Ambient temperature, minimum
-25 °C
Terminal Connector
Connector M12, 8-pole
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
Number of fail-safe digital outputs
2
Short-circuit recognition
Yes
Diagnostic output
Yes
Gross weight
80 g
Active area
lateral
Voltage, Utilisation category DC12
24 VDC
Switching frequency, approx.
1 Hz
Output current, (fail-safe output), maximum
0.25 A
Rated operating voltage, maximum
26.4 VDC
Degree of pollution to VDE 0100
3
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Material temperature resistance of the cable (at rest), minimum
-30 °C
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+70 °C
Ensured switch distance ON Sao
10 mm
Note
The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current
Length of sensor
22 mm
Height of sensor
25 mm
Width of sensor
106.3 mm
Ensured switch distance OFF Sar
20 mm
Switch distance
12 mm
Hysteresis (Switch distance), maximum
2 mm
Repeat accuracy R R
0.5 mm
Mounting
A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.
Actuating panels
lateral
Number of semi-conductor outputs with signaling function
1
Number of LEDs
3
Cascadable
Yes
Integral System Diagnostics, status
Yes
Duration of risk, maximum
200 ms
Safety functions
Yes
Time to readiness, maximum
2,000 ms
Reaction time, maximum
100 ms
Short circuit detection
Yes
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Sensor topology
Sensor for series wiring
Active principle
RFID
Standards
IEC 60947-5-3
Installation conditions (mechanical)
not flush
Coding level according to ISO 14119
Low
general information
Universal coding
Housing construction form
Block

Related documents RSS 36-D-ST Specs