RSS260-I2-ST-AS Schmersal Safety Switches


Part#:RSS260-I2-ST-AS
Alt. Part#:103004641
Manufacturer:Schmersal
Category:Safety Switches
Product Lifecycle:Active
Product description
RSS260-I2-ST-AS Schmersal - AS interface safety at work; Safety switchgear; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; Safety sensor, electronic; Thermoplastic enclosure; Small body, high switching distance; Protection class IP65 / I
Product Details
- Note (AS-i Input module address) Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
- AS-i Input module address 0
- AS-i Parameter bits, P3 Internal device error (FID)
- Note (AS-i Parameter bits) Set the parameter outputs to "1111" (0xF), FID: periphery error
- AS-i Parameter bits, P1 Enabling inhibit (tamper protection time) active (FID))
- AS-i Parameter bits, P2 Enabling inhibit (tamper protection time) active (FID)
- AS-i Parameter bits, P0 Actuator in
- AS-i Input, Channel 2 Data bits DI 2 / DI 3 = dynamic code transmission
- AS-i Input, Channel 1 Data bits DI 0 / DI 1 = dynamic code transmission
- AS-i Outputs, DO 0 … DO 3 No Function
- AS-i, ID-Code2 0xE
- AS-i, ID-Code 0xB
- AS-i, IO-Code 0x0
- AS-i Profile S-0.B.F.E
- AS-i, ID-Code1 0xF
- AS-i Version V 2.1
- AS-i Specification Safety-Slave
- AS-i Operating voltage AS-i maximum 31.6 VDC
- Note (AS-i Operating voltage) Protection against polarity reversal
- AS-i Operating voltage, minimum 18 VDC
- AS-i Current consumption, maximum 100 mA
- Switching frequency, maximum 1 Hz
- Rated impulse withstand voltage Uimp 0.8 kV
- Degree of pollution to VDE 0100 3
- Overvoltage category III
- Protection rating III
- Rated insulation voltage Ui 32 VDC
- Restistance to shock 30 g / 11 ms
- Ambient temperature, maximum +60 °C
- Storage and transport temperature, minimum -25 °C
- Storage and transport temperature, maximum +85 °C
- Resistance to vibrations to EN 60068-2-6 10 … 55 Hz, amplitude 1 mm
- Width of sensor 40 mm
- Degree of protection IP65 to EN 60529, IP67 to EN 60529
- Ensured switching distance OFF, front 18 mm
- Ambient temperature, minimum -25 °C
- Length of sensor 18 mm
- Terminal Connector Connector M8, 4-pole, A-coded
- Height of sensor 29.5 mm
- Ensured switch distance OFF Sar, lateral 15 mm
- Ensured switching distance ON, side 6 mm
- Switch distance Sn 12 mm, 9 mm (in case of approach from side)
- Ensured switching distance ON, front 10 mm
- Repeat accuracy R R 0.5 mm
- Hysteresis (Switch distance), maximum 2 mm
- Number of actuating directions 2
- Integral System Diagnostics, status Yes
- Coding Yes
- Safety functions Yes
- Gross weight 55 g
- Active principle RFID
- Duration of risk, maximum 200 ms
- Reaction time, maximum 100 ms
- Time to readiness, maximum 2,000 ms
- Enclosure material Thermoplastic hotmelt
- general information Individual coding, multiple teaching
- Standards IEC 61508, IEC 60947-5-3, EN ISO 14119
- Coding level according to ISO 14119 High
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
About the product
RSS260-I2-ST-AS Schmersal - AS interface safety at work; Safety switchgear; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; Safety sensor, electronic; Thermoplastic enclosure; Small body, high switching distance; Protection class IP65 / I
RSS260-I2-ST-AS Related Documents
Manufacturer warranty
RSS260-I2-ST-AS Schmersal
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare RSS260-I2-ST-AS with other products
Note (AS-i Input module a...
AS-i Input module address
AS-i Parameter bits, P3
Note (AS-i Parameter bit...
AS-i Parameter bits, P1
AS-i Parameter bits, P2
AS-i Parameter bits, P0
AS-i Input, Channel 2
AS-i Input, Channel 1
AS-i Outputs, DO 0 … DO 3
AS-i, ID-Code2
AS-i, ID-Code
AS-i, IO-Code
AS-i Profile
AS-i, ID-Code1
AS-i Version
AS-i Specification
AS-i Operating voltage AS...
Note (AS-i Operating volt...
AS-i Operating voltage, m...
AS-i Current consumption,...
Switching frequency, maxi...
Rated impulse withstand v...
Degree of pollution to VD...
Overvoltage category
Protection rating
Rated insulation voltage ...
Restistance to shock
Ambient temperature, maxi...
Storage and transport tem...
Storage and transport tem...
Resistance to vibrations ...
Width of sensor
Degree of protection
Ensured switching distanc...
Ambient temperature, mini...
Length of sensor
Terminal Connector
Height of sensor
Ensured switch distance O...
Ensured switching distanc...
Switch distance Sn
Ensured switching distanc...
Repeat accuracy R R
Hysteresis (Switch distan...
Number of actuating direc...
Integral System Diagnosti...
Coding
Safety functions
Gross weight
Active principle
Duration of risk, maximum
Reaction time, maximum
Time to readiness, maximu...
Enclosure material
general information
Standards
Coding level according to...
Interfering radiation
EMC rating
Current, Utilisation cate...
Voltage, Utilisation cate...
Current, Utilisation cate...
Versions
Voltage drop Ud, maximum
Current leakage Ir
Rated operating current (...
Operating current
Required rated short-circ...
Rated operating voltage, ...
Voltage type
Rated operating voltage
No-load supply current I0
Material temperature resi...
Material temperature resi...
Note (Repeat accuracy R)
Number of fail-safe digit...
Short-circuit recognition
Diagnostic output
Active area
Voltage, Utilisation cate...
Switching frequency, appr...
Output current, (fail-saf...
Rated operating voltage, ...
Material temperature resi...
Ensured switch distance O...
Note
Ensured switch distance O...
Switch distance
Mounting
Actuating panels
Number of semi-conductor ...
Number of LEDs
Cascadable
Short circuit detection
Sensor topology
Installation conditions (...
Housing construction form
Current, Utilisation cate...
Switching principle
Switching element
Thermal test current
Voltage, Utilisation cate...
Cable section, maximum
Cable entry
Cable section, minimum
Actuating speed, maximum
Positive break force, min...
positive break travel
Mechanical life, minimum
Number of cable glands
Material of the contacts,...
Latching force
Number of safety contacts
Number of auxiliary conta...
Selected product

RSS260-I2-ST-AS
Schmersal
RSS260-I2-ST-AS Schmersal - AS interface safety at work; Safety switchgear; Repeated individual codi...
Note (AS-i Input module address)Preset to address 0, can be ...
AS-i Input module address0
AS-i Parameter bits, P3Internal device error (FID)
Note (AS-i Parameter bits)Set the parameter outputs to...
AS-i Parameter bits, P1Enabling inhibit (tamper pro...
AS-i Parameter bits, P2Enabling inhibit (tamper pro...
AS-i Parameter bits, P0Actuator in
AS-i Input, Channel 2Data bits DI 2 / DI 3 = dyna...
AS-i Input, Channel 1Data bits DI 0 / DI 1 = dyna...
AS-i Outputs, DO 0 … DO 3No Function
AS-i, ID-Code20xE
AS-i, ID-Code0xB
AS-i, IO-Code0x0
AS-i ProfileS-0.B.F.E
AS-i, ID-Code10xF
AS-i VersionV 2.1
AS-i SpecificationSafety-Slave
AS-i Operating voltage AS-i maximum31.6 VDC
Note (AS-i Operating voltage)Protection against polarity ...
AS-i Operating voltage, minimum18 VDC
AS-i Current consumption, maximum100 mA
Switching frequency, maximum1 Hz
Rated impulse withstand voltage Uimp0.8 kV
Degree of pollution to VDE 01003
Overvoltage categoryIII
Protection ratingIII
Rated insulation voltage Ui32 VDC
Restistance to shock30 g / 11 ms
Ambient temperature, maximum+60 °C
Storage and transport temperature, minimum-25 °C
Storage and transport temperature, maximum+85 °C
Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm
Width of sensor40 mm
Degree of protectionIP65 to EN 60529, IP67 to EN...
Ensured switching distance OFF, front18 mm
Ambient temperature, minimum-25 °C
Length of sensor18 mm
Terminal ConnectorConnector M8, 4-pole, A-code...
Height of sensor29.5 mm
Ensured switch distance OFF Sar, lateral15 mm
Ensured switching distance ON, side6 mm
Switch distance Sn12 mm, 9 mm (in case of appr...
Ensured switching distance ON, front10 mm
Repeat accuracy R R0.5 mm
Hysteresis (Switch distance), maximum2 mm
Number of actuating directions2
Integral System Diagnostics, statusYes
CodingYes
Safety functionsYes
Gross weight55 g
Active principleRFID
Duration of risk, maximum200 ms
Reaction time, maximum100 ms
Time to readiness, maximum2,000 ms
Enclosure materialThermoplastic hotmelt
general informationIndividual coding, multiple ...
StandardsIEC 61508, IEC 60947-5-3, EN...
Coding level according to ISO 14119High
Interfering radiation-
EMC rating-
Current, Utilisation category DC12-
Voltage, Utilisation category DC13-
Current, Utilisation category DC13-
Versions-
Voltage drop Ud, maximum-
Current leakage Ir-
Rated operating current (safety outputs)-
Operating current-
Required rated short-circuit current to EN 60947-5-1-
Rated operating voltage, minimum-
Voltage type-
Rated operating voltage-
No-load supply current I0-
Material temperature resistance of the cable (in motion), minimum-
Material temperature resistance (long-term), maximum-
Note (Repeat accuracy R)-
Number of fail-safe digital outputs-
Short-circuit recognition-
Diagnostic output-
Active area-
Voltage, Utilisation category DC12-
Switching frequency, approx.-
Output current, (fail-safe output), maximum-
Rated operating voltage, maximum-
Material temperature resistance of the cable (at rest), minimum-
Ensured switch distance ON Sao-
Note-
Ensured switch distance OFF Sar-
Switch distance-
Mounting-
Actuating panels-
Number of semi-conductor outputs with signaling function-
Number of LEDs-
Cascadable-
Short circuit detection-
Sensor topology-
Installation conditions (mechanical)-
Housing construction form-
Current, Utilisation category AC-15-
Switching principle-
Switching element-
Thermal test current-
Voltage, Utilisation category AC15-
Cable section, maximum-
Cable entry-
Cable section, minimum-
Actuating speed, maximum-
Positive break force, minimum-
positive break travel-
Mechanical life, minimum-
Number of cable glands-
Material of the contacts, electrical-
Latching force-
Number of safety contacts-
Number of auxiliary contacts-
About the manufacturer

Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.
Recently viewed products
Relevant products
FAQ
Out if stock but available for backorder.
RSS260-I2-ST-AS Schmersal - AS interface safety at work; Safety switchgear; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; Safety sensor, electronic; Thermoplastic enclosure; Small body, high switching distance; Protection class IP65 / I
Similar products from: Safety Switches
What can I help you find today?