RSS260-I2-D-ST Schmersal Safety Switches

RSS260-I2-D-ST on MQ Automation
Schmersal

Part#:RSS260-I2-D-ST

Alt. Part#:103003607

Manufacturer:Schmersal

Category:Safety Switches

Product Lifecycle:Active

Product description

RSS260-I2-D-ST Schmersal - Safety sensors; Electronic safety sensors; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; 1 x connector plug M8; Frontal and lateral actuation enabled; Thermoplastic enclosure; Simple mounting without addition

Product Details

  • EMC rating
    IEC 60947-3
  • Interfering radiation
    IEC 61000-6-4
  • Voltage, Utilisation category DC13
    24 VDC
  • Current, Utilisation category DC12
    0.05 A
  • Voltage, Utilisation category DC12
    24 VDC
  • Current, Utilisation category DC13
    0.05 A
  • Current leakage Ir
    0.5 mA
  • Versions
    p-type
  • Switching frequency, approx.
    1 Hz
  • Voltage drop Ud, maximum
    2 V
  • Operating current
    50 mA
  • Rated operating voltage, maximum
    26.4 VDC
  • Rated operating voltage
    24 VDC -15% / +10%
  • Required rated short-circuit current to EN 60947-5-1
    100 A
  • Rated operating voltage, minimum
    20.4 VDC
  • No-load supply current I0
    100 mA
  • Overvoltage category
    III
  • Voltage type
    DC (direct current)
  • Degree of pollution to VDE 0100
    3
  • Rated impulse withstand voltage Uimp
    0.8 kV
  • Rated insulation voltage Ui
    32 VDC
  • Restistance to shock
    30 g / 11 ms
  • Resistance to vibrations to EN 60068-2-6
    10 … 55 Hz, amplitude 1 mm
  • Storage and transport temperature, maximum
    +85 °C
  • Ambient temperature, maximum
    +65 °C
  • Degree of protection
    IP65 to EN 60529, IP67 to EN 60529
  • Storage and transport temperature, minimum
    -25 °C
  • Height of sensor
    18 mm
  • Ambient temperature, minimum
    -25 °C
  • Note
    The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
  • Terminal Connector
    Connector M8
  • Ensured switching distance ON, front
    10 mm
  • Length of sensor
    29.5 mm
  • Ensured switch distance OFF Sar, lateral
    15 mm
  • Width of sensor
    39.2 mm
  • Ensured switching distance ON, side
    6 mm
  • Ensured switching distance OFF, front
    18 mm
  • Switch distance Sn
    front 12 mm, lateral 9 mm
  • Note (Repeat accuracy R)
    Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
  • Hysteresis (Switch distance), maximum
    2 mm
  • Mounting
    A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
  • Integral System Diagnostics, status
    Yes
  • Number of LEDs
    3
  • Actuating panels
    lateral, front side
  • Repeat accuracy R R
    0.5 mm
  • Number of fail-safe digital outputs
    2
  • Number of semi-conductor outputs with signaling function
    1
  • Short-circuit recognition
    Yes
  • Duration of risk, maximum
    200 ms
  • Safety functions
    Yes
  • Short circuit detection
    Yes
  • Time to readiness, maximum
    2,000 ms
  • Reaction time, maximum
    100 ms
  • Diagnostic output
    Yes
  • Cascadable
    Yes
  • Gross weight
    61 g
  • Active area
    lateral, front
  • Standards
    IEC 60947-5-3
  • Active principle
    RFID
  • Housing construction form
    Block
  • Sensor topology
    Sensor for series wiring
  • Coding level according to ISO 14119
    High
  • Enclosure material
    Plastic, thermoplastic, self-extinguishing
  • Installation conditions (mechanical)
    not flush
  • general information
    Individual coding, multiple teaching

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.


About the product

RSS260-I2-D-ST Schmersal - Safety sensors; Electronic safety sensors; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; 1 x connector plug M8; Frontal and lateral actuation enabled; Thermoplastic enclosure; Simple mounting without addition



RSS260-I2-D-ST Related Documents

Manufacturer warranty

RSS260-I2-D-ST Schmersal

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare RSS260-I2-D-ST with other products

EMC rating

Interfering radiation

Voltage, Utilisation cate...

Current, Utilisation cate...

Voltage, Utilisation cate...

Current, Utilisation cate...

Current leakage Ir

Versions

Switching frequency, appr...

Voltage drop Ud, maximum

Operating current

Rated operating voltage, ...

Rated operating voltage

Required rated short-circ...

Rated operating voltage, ...

No-load supply current I0

Overvoltage category

Voltage type

Degree of pollution to VD...

Rated impulse withstand v...

Rated insulation voltage ...

Restistance to shock

Resistance to vibrations ...

Storage and transport tem...

Ambient temperature, maxi...

Degree of protection

Storage and transport tem...

Height of sensor

Ambient temperature, mini...

Note

Terminal Connector

Ensured switching distanc...

Length of sensor

Ensured switch distance O...

Width of sensor

Ensured switching distanc...

Ensured switching distanc...

Switch distance Sn

Note (Repeat accuracy R)

Hysteresis (Switch distan...

Mounting

Integral System Diagnosti...

Number of LEDs

Actuating panels

Repeat accuracy R R

Number of fail-safe digit...

Number of semi-conductor ...

Short-circuit recognition

Duration of risk, maximum

Safety functions

Short circuit detection

Time to readiness, maximu...

Reaction time, maximum

Diagnostic output

Cascadable

Gross weight

Active area

Standards

Active principle

Housing construction form

Sensor topology

Coding level according to...

Enclosure material

Installation conditions (...

general information

Rated operating current (...

Protection rating

Material temperature resi...

Material temperature resi...

Output current, (fail-saf...

Material temperature resi...

Ensured switch distance O...

Ensured switch distance O...

Switch distance

Current, Utilisation cate...

Switching principle

Switching element

Thermal test current

Voltage, Utilisation cate...

Cable section, maximum

Cable entry

Cable section, minimum

Actuating speed, maximum

Positive break force, min...

positive break travel

Mechanical life, minimum

Number of cable glands

Material of the contacts,...

Latching force

Number of safety contacts

Number of auxiliary conta...

Selected product

RSS260-I2-D-ST
0 in stock
RSS260-I2-D-ST
Schmersal

RSS260-I2-D-ST Schmersal - Safety sensors; Electronic safety sensors; Repeated individual coding wit...

EMC ratingIEC 60947-3

Interfering radiationIEC 61000-6-4

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category DC120.05 A

Voltage, Utilisation category DC1224 VDC

Current, Utilisation category DC130.05 A

Current leakage Ir0.5 mA

Versionsp-type

Switching frequency, approx.1 Hz

Voltage drop Ud, maximum2 V

Operating current50 mA

Rated operating voltage, maximum26.4 VDC

Rated operating voltage24 VDC -15% / +10%

Required rated short-circuit current to EN 60947-5-1100 A

Rated operating voltage, minimum20.4 VDC

No-load supply current I0100 mA

Overvoltage categoryIII

Voltage typeDC (direct current)

Degree of pollution to VDE 01003

Rated impulse withstand voltage Uimp0.8 kV

Rated insulation voltage Ui32 VDC

Restistance to shock30 g / 11 ms

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Storage and transport temperature, maximum+85 °C

Ambient temperature, maximum+65 °C

Degree of protectionIP65 to EN 60529, IP67 to EN...

Storage and transport temperature, minimum-25 °C

Height of sensor18 mm

Ambient temperature, minimum-25 °C

NoteThe cable section of the int...

Terminal ConnectorConnector M8

Ensured switching distance ON, front10 mm

Length of sensor29.5 mm

Ensured switch distance OFF Sar, lateral15 mm

Width of sensor39.2 mm

Ensured switching distance ON, side6 mm

Ensured switching distance OFF, front18 mm

Switch distance Snfront 12 mm, lateral 9 mm

Note (Repeat accuracy R)Axial offset: The long side ...

Hysteresis (Switch distance), maximum2 mm

MountingA 20 mm screw length usually...

Integral System Diagnostics, statusYes

Number of LEDs3

Actuating panelslateral, front side

Repeat accuracy R R0.5 mm

Number of fail-safe digital outputs2

Number of semi-conductor outputs with signaling function1

Short-circuit recognitionYes

Duration of risk, maximum200 ms

Safety functionsYes

Short circuit detectionYes

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Diagnostic outputYes

CascadableYes

Gross weight61 g

Active arealateral, front

StandardsIEC 60947-5-3

Active principleRFID

Housing construction formBlock

Sensor topologySensor for series wiring

Coding level according to ISO 14119High

Enclosure materialPlastic, thermoplastic, self...

Installation conditions (mechanical)not flush

general informationIndividual coding, multiple ...

Rated operating current (safety outputs)-

Protection rating-

Material temperature resistance of the cable (in motion), minimum-

Material temperature resistance (long-term), maximum-

Output current, (fail-safe output), maximum-

Material temperature resistance of the cable (at rest), minimum-

Ensured switch distance ON Sao-

Ensured switch distance OFF Sar-

Switch distance-

Current, Utilisation category AC-15-

Switching principle-

Switching element-

Thermal test current-

Voltage, Utilisation category AC15-

Cable section, maximum-

Cable entry-

Cable section, minimum-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Mechanical life, minimum-

Number of cable glands-

Material of the contacts, electrical-

Latching force-

Number of safety contacts-

Number of auxiliary contacts-

RSS 36-D-ST
1 in stock
RSS 36-D-ST
Schmersal

Safety sensors; Electronic safety sensors; Universal coding with RFID technology; 1 x connector sock...

EMC ratingIEC 60947-3

Interfering radiationIEC 61000-6-4

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category DC120.05 A

Voltage, Utilisation category DC1224 VDC

Current, Utilisation category DC130.05 A

Current leakage Ir0.5 mA

Versionsp-type

Switching frequency, approx.1 Hz

Voltage drop Ud, maximum2 V

Operating current600 mA

Rated operating voltage, maximum26.4 VDC

Rated operating voltage24 VDC −15 % / +10 %

Required rated short-circuit current to EN 60947-5-1100 A

Rated operating voltage, minimum20.4 VDC

No-load supply current I0100 mA

Overvoltage categoryIII

Voltage typeDC (direct current)

Degree of pollution to VDE 01003

Rated impulse withstand voltage Uimp0.8 kV

Rated insulation voltage Ui32 VDC

Restistance to shock30 g / 11 ms

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Storage and transport temperature, maximum+85 °C

Ambient temperature, maximum+70 °C

Degree of protectionIP65 to EN 60529, IP67 to EN...

Storage and transport temperature, minimum-25 °C

Height of sensor25 mm

Ambient temperature, minimum-25 °C

NoteThe cable section of the int...

Terminal ConnectorConnector M12, 8-pole

Ensured switching distance ON, front-

Length of sensor22 mm

Ensured switch distance OFF Sar, lateral-

Width of sensor106.3 mm

Ensured switching distance ON, side-

Ensured switching distance OFF, front-

Switch distance Sn-

Note (Repeat accuracy R)Axial offset: The long side ...

Hysteresis (Switch distance), maximum2 mm

MountingA screw length of 25 mm is s...

Integral System Diagnostics, statusYes

Number of LEDs3

Actuating panelslateral

Repeat accuracy R R0.5 mm

Number of fail-safe digital outputs2

Number of semi-conductor outputs with signaling function1

Short-circuit recognitionYes

Duration of risk, maximum200 ms

Safety functionsYes

Short circuit detectionYes

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Diagnostic outputYes

CascadableYes

Gross weight80 g

Active arealateral

StandardsIEC 60947-5-3

Active principleRFID

Housing construction formBlock

Sensor topologySensor for series wiring

Coding level according to ISO 14119Low

Enclosure materialPlastic, glass-fibre reinfor...

Installation conditions (mechanical)not flush

general informationUniversal coding

Rated operating current (safety outputs)250 mA

Protection ratingIII

Material temperature resistance of the cable (in motion), minimum-10 °C

Material temperature resistance (long-term), maximum+105 °C

Output current, (fail-safe output), maximum0.25 A

Material temperature resistance of the cable (at rest), minimum-30 °C

Ensured switch distance ON Sao10 mm

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Current, Utilisation category AC-15-

Switching principle-

Switching element-

Thermal test current-

Voltage, Utilisation category AC15-

Cable section, maximum-

Cable entry-

Cable section, minimum-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Mechanical life, minimum-

Number of cable glands-

Material of the contacts, electrical-

Latching force-

Number of safety contacts-

Number of auxiliary contacts-

AZ 16-12ZVRK-M20
4 in stock
AZ 16-12ZVRK-M20
Schmersal

Safety switch with separate actuator; 3 cable entries M 20 x 1.5; Large wiring compartment; Thermopl...

EMC rating-

Interfering radiation-

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category DC12-

Voltage, Utilisation category DC12-

Current, Utilisation category DC134 A

Current leakage Ir-

Versions-

Switching frequency, approx.-

Voltage drop Ud, maximum-

Operating current-

Rated operating voltage, maximum-

Rated operating voltage-

Required rated short-circuit current to EN 60947-5-1-

Rated operating voltage, minimum-

No-load supply current I0-

Overvoltage category-

Voltage type-

Degree of pollution to VDE 0100-

Rated impulse withstand voltage Uimp6 kV

Rated insulation voltage Ui500 V

Restistance to shock-

Resistance to vibrations to EN 60068-2-6-

Storage and transport temperature, maximum-

Ambient temperature, maximum+80 °C

Degree of protectionIP67 to EN 60529

Storage and transport temperature, minimum-

Height of sensor90 mm

Ambient temperature, minimum-30 °C

Note-

Terminal ConnectorScrew connection

Ensured switching distance ON, front-

Length of sensor30 mm

Ensured switch distance OFF Sar, lateral-

Width of sensor52 mm

Ensured switching distance ON, side-

Ensured switching distance OFF, front-

Switch distance Sn-

Note (Repeat accuracy R)-

Hysteresis (Switch distance), maximum-

Mounting-

Integral System Diagnostics, status-

Number of LEDs-

Actuating panels-

Repeat accuracy R R-

Number of fail-safe digital outputs-

Number of semi-conductor outputs with signaling function-

Short-circuit recognition-

Duration of risk, maximum-

Safety functions-

Short circuit detection-

Time to readiness, maximum-

Reaction time, maximum-

Diagnostic output-

Cascadable-

Gross weight115 g

Active area-

Standards-

Active principle-

Housing construction form-

Sensor topology-

Coding level according to ISO 14119Low

Enclosure materialPlastic, glass-fibre reinfor...

Installation conditions (mechanical)-

general information-

Rated operating current (safety outputs)-

Protection rating-

Material temperature resistance of the cable (in motion), minimum-

Material temperature resistance (long-term), maximum-

Output current, (fail-safe output), maximum-

Material temperature resistance of the cable (at rest), minimum-

Ensured switch distance ON Sao-

Ensured switch distance OFF Sar-

Switch distance-

Current, Utilisation category AC-154 A

Switching principleCreep circuit element

Switching elementNO contact, NC contact

Thermal test current10 A

Voltage, Utilisation category AC15230 VAC

Cable section, maximum2.5 mm²

Cable entry3 x M20 x 1,5

Cable section, minimum0.25 mm²

Actuating speed, maximum2 m/s

Positive break force, minimum10 N

positive break travel8 mm

Mechanical life, minimum1,000,000 Operations

Number of cable glands3

Material of the contacts, electricalSilver

Latching force30 N

Number of safety contacts2

Number of auxiliary contacts1

About the manufacturer

Schmersal

Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.

Recently viewed products

Relevant products

FAQ

Out if stock but available for backorder.

RSS260-I2-D-ST Schmersal - Safety sensors; Electronic safety sensors; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; 1 x connector plug M8; Frontal and lateral actuation enabled; Thermoplastic enclosure; Simple mounting without addition

Similar products from: Safety Switches

What can I help you find today?

Recommended parts