RSS260-I2-SD-ST Schmersal Safety Switches


Part#:RSS260-I2-SD-ST
Alt. Part#:103003603
Manufacturer:Schmersal
Category:Safety Switches
Product Lifecycle:Active
Product description
RSS260-I2-SD-ST Schmersal - Safety sensors; Electronic safety sensors; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; 1 x connector plug M8; Frontal and lateral actuation enabled; Max. 31 sensors can be wired in series.; Thermoplastic en
Product Details
- Interfering radiation IEC 61000-6-4
- EMC rating IEC 60947-3
- Voltage drop Ud, maximum 2 V
- Voltage, Utilisation category DC13 24 VDC
- Current, Utilisation category DC13 0.25 A
- Current leakage Ir 0.5 mA
- Current, Utilisation category DC12 0.25 A
- Versions p-type
- Voltage, Utilisation category DC12 24 VDC
- Switching frequency, approx. 1 Hz
- Operating current 150 mA
- Required rated short-circuit current to EN 60947-5-1 100 A
- Rated operating voltage, minimum 20.4 VDC
- Voltage type DC (direct current)
- Rated operating voltage, maximum 26.4 VDC
- Rated operating voltage 24 VDC -15% / +10%
- Overvoltage category III
- Degree of pollution to VDE 0100 3
- Rated impulse withstand voltage Uimp 0.8 kV
- No-load supply current I0 100 mA
- Rated insulation voltage Ui 32 VDC
- Restistance to shock 30 g / 11 ms
- Resistance to vibrations to EN 60068-2-6 10 … 55 Hz, amplitude 1 mm
- Storage and transport temperature, maximum +85 °C
- Ambient temperature, maximum +65 °C
- Degree of protection IP65 to EN 60529, IP67 to EN 60529
- Ensured switch distance OFF Sar, lateral 15 mm
- Ambient temperature, minimum -25 °C
- Length of sensor 29.5 mm
- Storage and transport temperature, minimum -25 °C
- Height of sensor 18 mm
- Width of sensor 39.2 mm
- Note The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
- Terminal Connector Connector M8
- Switch distance Sn front 12 mm, lateral 9 mm
- Ensured switching distance ON, side 6 mm
- Ensured switching distance OFF, front 18 mm
- Ensured switching distance ON, front 10 mm
- Note (Repeat accuracy R) Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
- Hysteresis (Switch distance), maximum 2 mm
- Actuating panels lateral, front side
- Mounting A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
- Number of semi-conductor outputs with signaling function 1
- Repeat accuracy R R 0.5 mm
- Number of Series-wiring of sensors 31
- Integral System Diagnostics, status Yes
- Number of fail-safe digital outputs 2
- Number of LEDs 3
- Short-circuit recognition Yes
- Cascadable Yes
- Safety functions Yes
- Diagnostic output Yes
- Duration of risk, maximum 200 ms
- Short circuit detection Yes
- Serial diagnostics Yes
- Reaction time, maximum 100 ms
- Time to readiness, maximum 2,000 ms
- Enclosure material Plastic, thermoplastic, self-extinguishing
- Housing construction form Block
- Coding level according to ISO 14119 High
- general information Individual coding, multiple teaching
- Installation conditions (mechanical) not flush
- Gross weight 60 g
- Active area lateral, front
- Standards IEC 60947-5-3
- Sensor topology Sensor for series wiring
- Active principle RFID
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
About the product
RSS260-I2-SD-ST Schmersal - Safety sensors; Electronic safety sensors; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; 1 x connector plug M8; Frontal and lateral actuation enabled; Max. 31 sensors can be wired in series.; Thermoplastic en
RSS260-I2-SD-ST Related Documents
Manufacturer warranty
RSS260-I2-SD-ST Schmersal
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare RSS260-I2-SD-ST with other products
Interfering radiation
EMC rating
Voltage drop Ud, maximum
Voltage, Utilisation cate...
Current, Utilisation cate...
Current leakage Ir
Current, Utilisation cate...
Versions
Voltage, Utilisation cate...
Switching frequency, appr...
Operating current
Required rated short-circ...
Rated operating voltage, ...
Voltage type
Rated operating voltage, ...
Rated operating voltage
Overvoltage category
Degree of pollution to VD...
Rated impulse withstand v...
No-load supply current I0
Rated insulation voltage ...
Restistance to shock
Resistance to vibrations ...
Storage and transport tem...
Ambient temperature, maxi...
Degree of protection
Ensured switch distance O...
Ambient temperature, mini...
Length of sensor
Storage and transport tem...
Height of sensor
Width of sensor
Note
Terminal Connector
Switch distance Sn
Ensured switching distanc...
Ensured switching distanc...
Ensured switching distanc...
Note (Repeat accuracy R)
Hysteresis (Switch distan...
Actuating panels
Mounting
Number of semi-conductor ...
Repeat accuracy R R
Number of Series-wiring o...
Integral System Diagnosti...
Number of fail-safe digit...
Number of LEDs
Short-circuit recognition
Cascadable
Safety functions
Diagnostic output
Duration of risk, maximum
Short circuit detection
Serial diagnostics
Reaction time, maximum
Time to readiness, maximu...
Enclosure material
Housing construction form
Coding level according to...
general information
Installation conditions (...
Gross weight
Active area
Standards
Sensor topology
Active principle
Rated operating current (...
Protection rating
Material temperature resi...
Material temperature resi...
Output current, (fail-saf...
Material temperature resi...
Ensured switch distance O...
Ensured switch distance O...
Switch distance
Current, Utilisation cate...
Switching principle
Switching element
Thermal test current
Voltage, Utilisation cate...
Cable section, maximum
Cable entry
Cable section, minimum
Actuating speed, maximum
Positive break force, min...
positive break travel
Mechanical life, minimum
Number of cable glands
Material of the contacts,...
Latching force
Number of safety contacts
Number of auxiliary conta...
Selected product

RSS260-I2-SD-ST
Schmersal
RSS260-I2-SD-ST Schmersal - Safety sensors; Electronic safety sensors; Repeated individual coding wi...
Interfering radiationIEC 61000-6-4
EMC ratingIEC 60947-3
Voltage drop Ud, maximum2 V
Voltage, Utilisation category DC1324 VDC
Current, Utilisation category DC130.25 A
Current leakage Ir0.5 mA
Current, Utilisation category DC120.25 A
Versionsp-type
Voltage, Utilisation category DC1224 VDC
Switching frequency, approx.1 Hz
Operating current150 mA
Required rated short-circuit current to EN 60947-5-1100 A
Rated operating voltage, minimum20.4 VDC
Voltage typeDC (direct current)
Rated operating voltage, maximum26.4 VDC
Rated operating voltage24 VDC -15% / +10%
Overvoltage categoryIII
Degree of pollution to VDE 01003
Rated impulse withstand voltage Uimp0.8 kV
No-load supply current I0100 mA
Rated insulation voltage Ui32 VDC
Restistance to shock30 g / 11 ms
Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm
Storage and transport temperature, maximum+85 °C
Ambient temperature, maximum+65 °C
Degree of protectionIP65 to EN 60529, IP67 to EN...
Ensured switch distance OFF Sar, lateral15 mm
Ambient temperature, minimum-25 °C
Length of sensor29.5 mm
Storage and transport temperature, minimum-25 °C
Height of sensor18 mm
Width of sensor39.2 mm
NoteThe cable section of the int...
Terminal ConnectorConnector M8
Switch distance Snfront 12 mm, lateral 9 mm
Ensured switching distance ON, side6 mm
Ensured switching distance OFF, front18 mm
Ensured switching distance ON, front10 mm
Note (Repeat accuracy R)Axial offset: The long side ...
Hysteresis (Switch distance), maximum2 mm
Actuating panelslateral, front side
MountingA 20 mm screw length usually...
Number of semi-conductor outputs with signaling function1
Repeat accuracy R R0.5 mm
Number of Series-wiring of sensors31
Integral System Diagnostics, statusYes
Number of fail-safe digital outputs2
Number of LEDs3
Short-circuit recognitionYes
CascadableYes
Safety functionsYes
Diagnostic outputYes
Duration of risk, maximum200 ms
Short circuit detectionYes
Serial diagnosticsYes
Reaction time, maximum100 ms
Time to readiness, maximum2,000 ms
Enclosure materialPlastic, thermoplastic, self...
Housing construction formBlock
Coding level according to ISO 14119High
general informationIndividual coding, multiple ...
Installation conditions (mechanical)not flush
Gross weight60 g
Active arealateral, front
StandardsIEC 60947-5-3
Sensor topologySensor for series wiring
Active principleRFID
Rated operating current (safety outputs)-
Protection rating-
Material temperature resistance of the cable (in motion), minimum-
Material temperature resistance (long-term), maximum-
Output current, (fail-safe output), maximum-
Material temperature resistance of the cable (at rest), minimum-
Ensured switch distance ON Sao-
Ensured switch distance OFF Sar-
Switch distance-
Current, Utilisation category AC-15-
Switching principle-
Switching element-
Thermal test current-
Voltage, Utilisation category AC15-
Cable section, maximum-
Cable entry-
Cable section, minimum-
Actuating speed, maximum-
Positive break force, minimum-
positive break travel-
Mechanical life, minimum-
Number of cable glands-
Material of the contacts, electrical-
Latching force-
Number of safety contacts-
Number of auxiliary contacts-
About the manufacturer

Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.
Recently viewed products
Relevant products
FAQ
Out if stock but available for backorder.
RSS260-I2-SD-ST Schmersal - Safety sensors; Electronic safety sensors; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; 1 x connector plug M8; Frontal and lateral actuation enabled; Max. 31 sensors can be wired in series.; Thermoplastic en
Similar products from: Safety Switches
What can I help you find today?