RSS260-SD-ST Schmersal Safety Switches

RSS260-SD-ST on MQ Automation
Schmersal

Part#:RSS260-SD-ST

Alt. Part#:103003605

Manufacturer:Schmersal

Category:Safety Switches

Product Lifecycle:Active

Product description

RSS260-SD-ST Schmersal - Safety sensors; Electronic safety sensors; Universal coding with RFID technology; 1 x connector plug M8; Frontal and lateral actuation enabled; Max. 31 sensors can be wired in series.; Thermoplastic enclosure; Simple mounting without additional angle; RFI

Product Details

  • Voltage drop Ud, maximum
    2 V
  • EMC rating
    IEC 60947-3
  • Interfering radiation
    IEC 61000-6-4
  • Voltage, Utilisation category DC13
    24 VDC
  • Current, Utilisation category DC12
    0.25 A
  • Current, Utilisation category DC13
    0.25 A
  • Operating current
    150 mA
  • Switching frequency, approx.
    1 Hz
  • Current leakage Ir
    0.5 mA
  • Rated operating voltage, maximum
    26.4 VDC
  • Versions
    p-type
  • Required rated short-circuit current to EN 60947-5-1
    100 A
  • No-load supply current I0
    100 mA
  • Voltage type
    DC (direct current)
  • Rated insulation voltage Ui
    32 VDC
  • Degree of pollution to VDE 0100
    3
  • Resistance to vibrations to EN 60068-2-6
    10 … 55 Hz, amplitude 1 mm
  • Storage and transport temperature, maximum
    +85 °C
  • Storage and transport temperature, minimum
    -25 °C
  • Ambient temperature, minimum
    -25 °C
  • Note
    The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
  • Ensured switch distance OFF Sar, lateral
    15 mm
  • Switch distance Sn
    front 12 mm, lateral 9 mm
  • Note (Repeat accuracy R)
    Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
  • Voltage, Utilisation category DC12
    24 VDC
  • Rated operating voltage
    24 VDC -15% / +10%
  • Rated operating voltage, minimum
    20.4 VDC
  • Overvoltage category
    III
  • Rated impulse withstand voltage Uimp
    0.8 kV
  • Restistance to shock
    30 g / 11 ms
  • Ambient temperature, maximum
    +65 °C
  • Degree of protection
    IP65 to EN 60529, IP67 to EN 60529
  • Width of sensor
    39.2 mm
  • Height of sensor
    18 mm
  • Length of sensor
    29.5 mm
  • Terminal Connector
    Connector M8
  • Ensured switching distance OFF, front
    18 mm
  • Hysteresis (Switch distance), maximum
    2 mm
  • Ensured switching distance ON, side
    6 mm
  • Ensured switching distance ON, front
    10 mm
  • Repeat accuracy R R
    0.5 mm
  • Mounting
    A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
  • Actuating panels
    lateral, front side
  • Standards
    IEC 60947-5-3
  • Number of LEDs
    3
  • Number of semi-conductor outputs with signaling function
    1
  • Cascadable
    Yes
  • Number of Series-wiring of sensors
    31
  • Safety functions
    Yes
  • Integral System Diagnostics, status
    Yes
  • Number of fail-safe digital outputs
    2
  • Short circuit detection
    Yes
  • Short-circuit recognition
    Yes
  • Serial diagnostics
    Yes
  • Duration of risk, maximum
    200 ms
  • Reaction time, maximum
    100 ms
  • Diagnostic output
    Yes
  • Enclosure material
    Plastic, thermoplastic, self-extinguishing
  • Time to readiness, maximum
    2,000 ms
  • Gross weight
    60.4 g
  • Active area
    lateral, front
  • Sensor topology
    Sensor for series wiring
  • Housing construction form
    Block
  • Active principle
    RFID
  • Installation conditions (mechanical)
    not flush
  • Coding level according to ISO 14119
    Low
  • general information
    Universal coding

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.


About the product

RSS260-SD-ST Schmersal - Safety sensors; Electronic safety sensors; Universal coding with RFID technology; 1 x connector plug M8; Frontal and lateral actuation enabled; Max. 31 sensors can be wired in series.; Thermoplastic enclosure; Simple mounting without additional angle; RFI



RSS260-SD-ST Related Documents

Manufacturer warranty

RSS260-SD-ST Schmersal

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare RSS260-SD-ST with other products

Voltage drop Ud, maximum

EMC rating

Interfering radiation

Voltage, Utilisation cate...

Current, Utilisation cate...

Current, Utilisation cate...

Operating current

Switching frequency, appr...

Current leakage Ir

Rated operating voltage, ...

Versions

Required rated short-circ...

No-load supply current I0

Voltage type

Rated insulation voltage ...

Degree of pollution to VD...

Resistance to vibrations ...

Storage and transport tem...

Storage and transport tem...

Ambient temperature, mini...

Note

Ensured switch distance O...

Switch distance Sn

Note (Repeat accuracy R)

Voltage, Utilisation cate...

Rated operating voltage

Rated operating voltage, ...

Overvoltage category

Rated impulse withstand v...

Restistance to shock

Ambient temperature, maxi...

Degree of protection

Width of sensor

Height of sensor

Length of sensor

Terminal Connector

Ensured switching distanc...

Hysteresis (Switch distan...

Ensured switching distanc...

Ensured switching distanc...

Repeat accuracy R R

Mounting

Actuating panels

Standards

Number of LEDs

Number of semi-conductor ...

Cascadable

Number of Series-wiring o...

Safety functions

Integral System Diagnosti...

Number of fail-safe digit...

Short circuit detection

Short-circuit recognition

Serial diagnostics

Duration of risk, maximum

Reaction time, maximum

Diagnostic output

Enclosure material

Time to readiness, maximu...

Gross weight

Active area

Sensor topology

Housing construction form

Active principle

Installation conditions (...

Coding level according to...

general information

Rated operating current (...

Protection rating

Material temperature resi...

Material temperature resi...

Output current, (fail-saf...

Material temperature resi...

Ensured switch distance O...

Ensured switch distance O...

Switch distance

Current, Utilisation cate...

Switching principle

Switching element

Thermal test current

Voltage, Utilisation cate...

Cable section, maximum

Cable entry

Cable section, minimum

Actuating speed, maximum

Positive break force, min...

positive break travel

Mechanical life, minimum

Number of cable glands

Material of the contacts,...

Latching force

Number of safety contacts

Number of auxiliary conta...

Selected product

RSS260-SD-ST
0 in stock
RSS260-SD-ST
Schmersal

RSS260-SD-ST Schmersal - Safety sensors; Electronic safety sensors; Universal coding with RFID techn...

Voltage drop Ud, maximum2 V

EMC ratingIEC 60947-3

Interfering radiationIEC 61000-6-4

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category DC120.25 A

Current, Utilisation category DC130.25 A

Operating current150 mA

Switching frequency, approx.1 Hz

Current leakage Ir0.5 mA

Rated operating voltage, maximum26.4 VDC

Versionsp-type

Required rated short-circuit current to EN 60947-5-1100 A

No-load supply current I0100 mA

Voltage typeDC (direct current)

Rated insulation voltage Ui32 VDC

Degree of pollution to VDE 01003

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ambient temperature, minimum-25 °C

NoteThe cable section of the int...

Ensured switch distance OFF Sar, lateral15 mm

Switch distance Snfront 12 mm, lateral 9 mm

Note (Repeat accuracy R)Axial offset: The long side ...

Voltage, Utilisation category DC1224 VDC

Rated operating voltage24 VDC -15% / +10%

Rated operating voltage, minimum20.4 VDC

Overvoltage categoryIII

Rated impulse withstand voltage Uimp0.8 kV

Restistance to shock30 g / 11 ms

Ambient temperature, maximum+65 °C

Degree of protectionIP65 to EN 60529, IP67 to EN...

Width of sensor39.2 mm

Height of sensor18 mm

Length of sensor29.5 mm

Terminal ConnectorConnector M8

Ensured switching distance OFF, front18 mm

Hysteresis (Switch distance), maximum2 mm

Ensured switching distance ON, side6 mm

Ensured switching distance ON, front10 mm

Repeat accuracy R R0.5 mm

MountingA 20 mm screw length usually...

Actuating panelslateral, front side

StandardsIEC 60947-5-3

Number of LEDs3

Number of semi-conductor outputs with signaling function1

CascadableYes

Number of Series-wiring of sensors31

Safety functionsYes

Integral System Diagnostics, statusYes

Number of fail-safe digital outputs2

Short circuit detectionYes

Short-circuit recognitionYes

Serial diagnosticsYes

Duration of risk, maximum200 ms

Reaction time, maximum100 ms

Diagnostic outputYes

Enclosure materialPlastic, thermoplastic, self...

Time to readiness, maximum2,000 ms

Gross weight60.4 g

Active arealateral, front

Sensor topologySensor for series wiring

Housing construction formBlock

Active principleRFID

Installation conditions (mechanical)not flush

Coding level according to ISO 14119Low

general informationUniversal coding

Rated operating current (safety outputs)-

Protection rating-

Material temperature resistance of the cable (in motion), minimum-

Material temperature resistance (long-term), maximum-

Output current, (fail-safe output), maximum-

Material temperature resistance of the cable (at rest), minimum-

Ensured switch distance ON Sao-

Ensured switch distance OFF Sar-

Switch distance-

Current, Utilisation category AC-15-

Switching principle-

Switching element-

Thermal test current-

Voltage, Utilisation category AC15-

Cable section, maximum-

Cable entry-

Cable section, minimum-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Mechanical life, minimum-

Number of cable glands-

Material of the contacts, electrical-

Latching force-

Number of safety contacts-

Number of auxiliary contacts-

RSS 36-D-ST
1 in stock
RSS 36-D-ST
Schmersal

Safety sensors; Electronic safety sensors; Universal coding with RFID technology; 1 x connector sock...

Voltage drop Ud, maximum2 V

EMC ratingIEC 60947-3

Interfering radiationIEC 61000-6-4

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category DC120.05 A

Current, Utilisation category DC130.05 A

Operating current600 mA

Switching frequency, approx.1 Hz

Current leakage Ir0.5 mA

Rated operating voltage, maximum26.4 VDC

Versionsp-type

Required rated short-circuit current to EN 60947-5-1100 A

No-load supply current I0100 mA

Voltage typeDC (direct current)

Rated insulation voltage Ui32 VDC

Degree of pollution to VDE 01003

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ambient temperature, minimum-25 °C

NoteThe cable section of the int...

Ensured switch distance OFF Sar, lateral-

Switch distance Sn-

Note (Repeat accuracy R)Axial offset: The long side ...

Voltage, Utilisation category DC1224 VDC

Rated operating voltage24 VDC −15 % / +10 %

Rated operating voltage, minimum20.4 VDC

Overvoltage categoryIII

Rated impulse withstand voltage Uimp0.8 kV

Restistance to shock30 g / 11 ms

Ambient temperature, maximum+70 °C

Degree of protectionIP65 to EN 60529, IP67 to EN...

Width of sensor106.3 mm

Height of sensor25 mm

Length of sensor22 mm

Terminal ConnectorConnector M12, 8-pole

Ensured switching distance OFF, front-

Hysteresis (Switch distance), maximum2 mm

Ensured switching distance ON, side-

Ensured switching distance ON, front-

Repeat accuracy R R0.5 mm

MountingA screw length of 25 mm is s...

Actuating panelslateral

StandardsIEC 60947-5-3

Number of LEDs3

Number of semi-conductor outputs with signaling function1

CascadableYes

Number of Series-wiring of sensors-

Safety functionsYes

Integral System Diagnostics, statusYes

Number of fail-safe digital outputs2

Short circuit detectionYes

Short-circuit recognitionYes

Serial diagnostics-

Duration of risk, maximum200 ms

Reaction time, maximum100 ms

Diagnostic outputYes

Enclosure materialPlastic, glass-fibre reinfor...

Time to readiness, maximum2,000 ms

Gross weight80 g

Active arealateral

Sensor topologySensor for series wiring

Housing construction formBlock

Active principleRFID

Installation conditions (mechanical)not flush

Coding level according to ISO 14119Low

general informationUniversal coding

Rated operating current (safety outputs)250 mA

Protection ratingIII

Material temperature resistance of the cable (in motion), minimum-10 °C

Material temperature resistance (long-term), maximum+105 °C

Output current, (fail-safe output), maximum0.25 A

Material temperature resistance of the cable (at rest), minimum-30 °C

Ensured switch distance ON Sao10 mm

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Current, Utilisation category AC-15-

Switching principle-

Switching element-

Thermal test current-

Voltage, Utilisation category AC15-

Cable section, maximum-

Cable entry-

Cable section, minimum-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Mechanical life, minimum-

Number of cable glands-

Material of the contacts, electrical-

Latching force-

Number of safety contacts-

Number of auxiliary contacts-

AZ 16-12ZVRK-M20
4 in stock
AZ 16-12ZVRK-M20
Schmersal

Safety switch with separate actuator; 3 cable entries M 20 x 1.5; Large wiring compartment; Thermopl...

Voltage drop Ud, maximum-

EMC rating-

Interfering radiation-

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category DC12-

Current, Utilisation category DC134 A

Operating current-

Switching frequency, approx.-

Current leakage Ir-

Rated operating voltage, maximum-

Versions-

Required rated short-circuit current to EN 60947-5-1-

No-load supply current I0-

Voltage type-

Rated insulation voltage Ui500 V

Degree of pollution to VDE 0100-

Resistance to vibrations to EN 60068-2-6-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ambient temperature, minimum-30 °C

Note-

Ensured switch distance OFF Sar, lateral-

Switch distance Sn-

Note (Repeat accuracy R)-

Voltage, Utilisation category DC12-

Rated operating voltage-

Rated operating voltage, minimum-

Overvoltage category-

Rated impulse withstand voltage Uimp6 kV

Restistance to shock-

Ambient temperature, maximum+80 °C

Degree of protectionIP67 to EN 60529

Width of sensor52 mm

Height of sensor90 mm

Length of sensor30 mm

Terminal ConnectorScrew connection

Ensured switching distance OFF, front-

Hysteresis (Switch distance), maximum-

Ensured switching distance ON, side-

Ensured switching distance ON, front-

Repeat accuracy R R-

Mounting-

Actuating panels-

Standards-

Number of LEDs-

Number of semi-conductor outputs with signaling function-

Cascadable-

Number of Series-wiring of sensors-

Safety functions-

Integral System Diagnostics, status-

Number of fail-safe digital outputs-

Short circuit detection-

Short-circuit recognition-

Serial diagnostics-

Duration of risk, maximum-

Reaction time, maximum-

Diagnostic output-

Enclosure materialPlastic, glass-fibre reinfor...

Time to readiness, maximum-

Gross weight115 g

Active area-

Sensor topology-

Housing construction form-

Active principle-

Installation conditions (mechanical)-

Coding level according to ISO 14119Low

general information-

Rated operating current (safety outputs)-

Protection rating-

Material temperature resistance of the cable (in motion), minimum-

Material temperature resistance (long-term), maximum-

Output current, (fail-safe output), maximum-

Material temperature resistance of the cable (at rest), minimum-

Ensured switch distance ON Sao-

Ensured switch distance OFF Sar-

Switch distance-

Current, Utilisation category AC-154 A

Switching principleCreep circuit element

Switching elementNO contact, NC contact

Thermal test current10 A

Voltage, Utilisation category AC15230 VAC

Cable section, maximum2.5 mm²

Cable entry3 x M20 x 1,5

Cable section, minimum0.25 mm²

Actuating speed, maximum2 m/s

Positive break force, minimum10 N

positive break travel8 mm

Mechanical life, minimum1,000,000 Operations

Number of cable glands3

Material of the contacts, electricalSilver

Latching force30 N

Number of safety contacts2

Number of auxiliary contacts1

About the manufacturer

Schmersal

Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.

Recently viewed products

Relevant products

FAQ

Out if stock but available for backorder.

RSS260-SD-ST Schmersal - Safety sensors; Electronic safety sensors; Universal coding with RFID technology; 1 x connector plug M8; Frontal and lateral actuation enabled; Max. 31 sensors can be wired in series.; Thermoplastic enclosure; Simple mounting without additional angle; RFI

Similar products from: Safety Switches

What can I help you find today?

Recommended parts