CSS12-34F1-V-D-M-ST Schmersal Electronic Components

Product Details

• Interfering radiation
  IEC 61000-6-4
• EMC rating
  IEC 61000-6-2
• Voltage, Utilisation category DC13
  24 VDC
• Voltage, Utilisation category DC12
  24 VDC
• Current, Utilisation category DC13
  0.05 A
• Current, Utilisation category DC12
  0.05 A
• Current leakage Ir
  0.5 mA
• Voltage drop Ud, maximum
  5 V
• Versions
  p-type
• Output current, (fail-safe output), maximum
  0.25 A
• Rated operating current (safety outputs)
  250 mA
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Switching frequency, approx.
  3 Hz
• Operating current
  600 mA
• Voltage type
  DC (direct current)
• No-load supply current I0
  100 mA
• Degree of pollution to VDE 0100
  3
• Protection rating
  II
• Rated impulse withstand voltage Uimp
  0.8 kV
• Overvoltage category
  III
Restistance to shock
30 g / 11 ms
Rated insulation voltage Ui
32 VDC
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+70 °C
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Storage and transport temperature, maximum
+85 °C
Ambient temperature, minimum
-25 °C
Height of sensor
108.2 mm
Width of sensor
27 mm
Length of sensor
35 mm
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Terminal Connector
Connector plug M12, 8-pole
Ensured switch distance ON Sao
10 mm, 13 mm, 8 mm
Note (Repeat accuracy R)
Axial offset: the front face allows for an axial misalignment (z) of max. ± 8 mm (see figure: operating principle).
Ensured switch distance OFF Sar
15 mm, 16 mm, 18 mm
Switch distance
10 mm, 12 mm, 15 mm
Repeat accuracy R R
0.5 mm
Hysteresis (Switch distance), maximum
1.5 mm
Number of fail-safe digital outputs
2
Actuator switch distance
Actuator CST 34-V-1: 12 mm, Actuator CST 34-S-2: 10 mm, Actuator CST 34-S-3: 15 mm
Number of Series-wiring of sensors
31
Actuating panels
Actuation from top
Number of semi-conductor outputs with signaling function
1
Number of LEDs
3
Diagnostic output
Yes
Integral System Diagnostics, status
Yes
Cascadable
Yes
Short-circuit recognition
Yes
Input for reset pushbutton, with edge monitoring
Yes
Safety functions
Yes
Duration of risk, maximum
60 ms
Short circuit detection
Yes
Standards
IEC 60947-5-3
Sensor topology
Sensor for series wiring
Installation conditions (mechanical)
not flush
Housing construction form
Block
Reaction time, maximum
30 ms
Gross weight
147.5 g
Active principle
inductive
Active area
front side
Enclosure material
Glass-fibre, reinforced thermoplastic

CSS12-34F1-V-D-M-ST Related Documents