CSS 14-34-S-SD-M-ST Schmersal Electronic Components

Product Details

• EMC rating
  IEC 61000-6-2
• Operating current
  150 mA
• Voltage, Utilisation category DC13
  24 VDC
• Current leakage Ir
  0.5 mA
• Interfering radiation
  IEC 61000-6-4
• Current, Utilisation category DC13
  0.25 A
• Current, Utilisation category DC12
  0.25 A
• Voltage, Utilisation category DC12
  24 VDC
• Rated operating current (safety outputs)
  250 mA
• Voltage drop Ud, maximum
  5 V
• Output current, (fail-safe output), maximum
  0.25 A
• Versions
  p-type
• Switching frequency, approx.
  3 Hz
• Required rated short-circuit current to EN 60947-5-1
  100 A
• No-load supply current I0
  100 mA
• Voltage type
  DC (direct current)
• Degree of pollution to VDE 0100
  3
• Overvoltage category
  III
• Rated impulse withstand voltage Uimp
  0.8 kV
• Restistance to shock
  30 g / 11 ms
Rated insulation voltage Ui
32 VDC
Protection rating
II
Storage and transport temperature, minimum
-25 °C
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Storage and transport temperature, maximum
+85 °C
Ambient temperature, maximum
+70 °C
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Ambient temperature, minimum
-25 °C
Height of sensor
108.2 mm
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Length of sensor
35 mm
Width of sensor
27 mm
Terminal Connector
Connector plug M12, 8-pole
Hysteresis (Switch distance), maximum
1.5 mm
Ensured switch distance OFF Sar
13 mm, 17 mm
Repeat accuracy R R
0.5 mm
Ensured switch distance ON Sao
12 mm, 8 mm
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 36 mm (e.g. mounting tolerance or due to guard door sagging). Increased misalignment, max. 53 mm, possible when the CST 34-S-2 actuator is used. The axial m
Switch distance
10 mm, 14 mm
Actuator switch distance
Actuator CST 180-1 / CST 180-2: 10 mm, Actuator CST 34-S-1: 14 mm, Actuator CST 34-S-2: 14 mm
Installation conditions (mechanical)
not flush
Actuating panels
lateral
Number of fail-safe digital outputs
2
Number of LEDs
3
Number of semi-conductor outputs with signaling function
1
Number of Series-wiring of sensors
31
Enclosure material
Glass-fibre, reinforced thermoplastic
Reaction time, maximum
30 ms
Integral System Diagnostics, status
Yes
Gross weight
140 g
Active area
lateral
Sensor topology
Sensor for series wiring
Cascadable
Yes
Short-circuit recognition
Yes
Safety functions
Yes
Short circuit detection
Yes
Housing construction form
Block
Diagnostic output
Yes
Serial diagnostics
Yes
Duration of risk, maximum
60 ms
Standards
IEC 60947-5-3
Active principle
inductive

CSS 14-34-S-SD-M-ST Related Documents