CSS 12-34-V-D-M-ST Schmersal Electronic Components

Product Details

• Interfering radiation
  IEC 61000-6-4
• Voltage, Utilisation category DC12
  24 VDC
• Overvoltage category
  III
• Rated impulse withstand voltage Uimp
  0.8 kV
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 1 mm
• Degree of protection
  IP65 to EN 60529, IP67 to EN 60529
• EMC rating
  IEC 61000-6-2
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Current leakage Ir
  0.5 mA
• Voltage drop Ud, maximum
  5 V
• Versions
  p-type
• Rated operating current (safety outputs)
  250 mA
• Output current, (fail-safe output), maximum
  0.25 A
• Operating current
  600 mA
• Switching frequency, approx.
  3 Hz
• Required rated short-circuit current to EN 60947-5-1
  100 A
• No-load supply current I0
  100 mA
• Voltage type
  DC (direct current)
Protection rating
II
Restistance to shock
30 g / 11 ms
Degree of pollution to VDE 0100
3
Rated insulation voltage Ui
32 VDC
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+70 °C
Storage and transport temperature, maximum
+85 °C
Height of sensor
108.2 mm
Ambient temperature, minimum
-25 °C
Width of sensor
27 mm
Length of sensor
35 mm
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Terminal Connector
Connector plug M12, 8-pole
Repeat accuracy R R
0.5 mm
Ensured switch distance OFF Sar
15 mm, 16 mm, 18 mm
Switch distance
10 mm, 12 mm, 15 mm
Note (Repeat accuracy R)
Axial offset: the front face allows for an axial misalignment (z) of max. ± 8 mm (see figure: operating principle).
Ensured switch distance ON Sao
10 mm, 13 mm, 8 mm
Hysteresis (Switch distance), maximum
1.5 mm
Actuator switch distance
Actuator CST 34-V-1: 12 mm, Actuator CST 34-S-2: 10 mm, Actuator CST 34-S-3: 15 mm
Actuating panels
Actuation from top
Number of Series-wiring of sensors
31
Number of semi-conductor outputs with signaling function
1
Number of fail-safe digital outputs
2
Number of LEDs
3
Integral System Diagnostics, status
Yes
Short circuit detection
Yes
Cascadable
Yes
Safety functions
Yes
Short-circuit recognition
Yes
Diagnostic output
Yes
Duration of risk, maximum
60 ms
Standards
IEC 60947-5-3
Active area
front side
Enclosure material
Glass-fibre, reinforced thermoplastic
Active principle
inductive
Housing construction form
Block
Gross weight
140 g
Sensor topology
Sensor for series wiring
Reaction time, maximum
30 ms
Installation conditions (mechanical)
not flush

CSS 12-34-V-D-M-ST Related Documents