116517 Euchner Safety Locking Systems

Product Details

• Weight
  7.605045 lb
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Diagnostic Coverage (DC)
  99
• Performance Level
  PL e
• Mission time
  20
• B10D
  (According to manufacturer’s specifications)
• Category
  4
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Product version number
  V3.30.11
• Color
  white
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Switching element
  1NO
• Version
  Illuminated push buttons
• Safety class
  III
• Transponder coding
  Multicode
• Assignment diagram
  B1
• Special features
  Printed
• Assured release distance Sar
  max.65 mm
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Fusing
min.1 A Slow blow
Degree of contamination (external, according to EN 60947-1)
3
Connecting cable
Profinet I/O cable, at least cat. 5e
Maximum feed-in current in the connection block
max.4000 mA
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Rated insulation voltage Ui
75 V
Locking force FZh
2000 N
Connection
Push-pull RJ45 (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Current consumption
max.500 mA
Guard locking principle
Closed-circuit current principle
Rated impulse withstand voltage Uimp
0,5 kV
Switching frequency
0,25 Hz
Shock and vibration resistance
In acc. with EN 60947-5-3
Mechanical life
0,1 x 10⁶
Degree of protection
IP54
Installation orientation
Door hinge DIN right
Weight
3,1 kg
Ambient temperature
-20 ... 55 °C
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel