162926 Euchner Electronic Components

Product Details

• B10D
  0,13 x 10⁶
• Mission time
  20 y
• PFHD
  4.1 x 10 ⁻⁹
• Performance Level
  PL e
• Category
  4
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures see operating instructions
• Version
  Emergency stop
• Operating current
  1 ... 100 mA
• Switching element
  2 pos. driven NC
• Repeat accuracy R
  10 %
• Detent mechanism
  Snap-in bolt
• Discrepancy time
  max.10 ms In acc. with EN IEC 60947-5-3
• Off-state current Ir
  max.0,25 mA
• Operating voltage
  5 ... 24 V
• Switching current
  1 ... 150 mA
• Type of output
  2 semiconductor outputs, p-switching, short circuit-proof
• Safety class
  III
• Turn-on time
  max.400 ms
• Switching load
  24V DC, class 2 (Alternatively see operating instructions)
• EMC protection requirements
  In acc. with EN IEC 60947-5-3
Output voltage
0 ... 1 V DC
Degree of contamination (external, according to EN 60947-1)
3
Rated insulation voltage Ui
50 V
Rated impulse withstand voltage Uimp
0,5 kV
Connection rating
1 W
Utilization category acc. to EN 60947-5-2
24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Fusing
0,25 ... 8 A
Current consumption
40 mA
Operating voltage DC
24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Overtravel
5 mm
Test-pulse interval
min.100 ms
Ambient temperature
-20 ... +55 °C
Extraction force
20 N
Test pulses
max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
Actuating force
10 N
Installation orientation
Door hinge DIN right
Mechanical life
1 x 10⁶
Shock and vibration resistance
In acc. with EN 60947-5-3
Housing material
Fiber glass reinforced thermoplastic
Approach speed
max.20 m/min
Degree of protection
IP65 (Screwed tight plug connector/mating component)
Switching frequency
max.0,5 Hz
Weight
1,25 kg
Ready delay
max.1 s
Connection
2 plug connectors M12, 5-pin