116503 Euchner Electronic Components

Product Details

• Switching hysteresis
  min.1 mm
• Assured operating distance Sao
  min.14 mm
• Assured release distance Sar
  max.40 mm
• Operating distance
  19 mm
• Mission time
  20
• PFHD
  4.1 x 10⁻⁹
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Category
  4
• Performance Level
  PL e
• Repeat accuracy R
  ≤ 10
• Additional feature
  Rubber support included
• Off-state current Ir
  max.0,25 mA
• Discrepancy time
  max.10 ms
• Switching current
  max.50 mA
• Rated conditional short-circuit current
  100 A
• Type of output
  p-switching, short circuit-proof
• Test-pulse interval
  min.100 ms
• Test pulses
  max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Output voltage
  0,8 x UB ... UB V DC
• Utilization category acc. to EN 60947-5-2
  24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In acc. with EN IEC 60947-5-3
Risk time according to EN 60947-5-3
max.260 ms
Safety class
III
Turn-on time
max.300 ms
Rated insulation voltage Ui
300 V
Rated impulse withstand voltage Uimp
1,5 kV
Fusing
0,25 ... 8 A
Current consumption
max.35 mA
Connection
connection cable PUR, length 5m
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
Installation orientation
Any
Ready delay
0,5 s
Switching frequency
max.1 Hz
Tightening torque
max.0,8 Nm
Mounting distance
min.80 mm
Mounting method
Surface mounting on metal
Dynamic bending radius
10 x cable diameter
Housing material
Plastic, PBT
Degree of protection
IP67
Cable ambient temperature (static)
-25 ... 65 °C
Static bending radius
5 x cable diameter
Material
NBR 80 ±5 Shore
Cable ambient temperature (dynamic)
-25 ... 65 °C
Shock and vibration resistance
In acc. with EN 60947-5-3
Weight
0,2 kg