116505 Euchner Safety Proximity Sensors

Product Details

• Weight
  1.55866634 lb
• Series
  CES-AP
• Product Class
  Safety System
• Switching hysteresis
  min.1 mm
• Assured operating distance Sao
  min.10 mm
• Operating distance
  15 mm
• Assured release distance Sar
  max.60 mm
• Mission time
  20
• PFHD
  4.1 x 10⁻⁹
• Category
  4
• Performance Level
  PL e
• Additional feature
  Rubber support included
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Repeat accuracy R
  ≤ 10
• Discrepancy time
  max.10 ms
• Off-state current Ir
  max.0,25 mA
• Test-pulse interval
  min.100 ms
• Utilization category acc. to EN 60947-5-2
  24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
• Output voltage
  0,8 x UB ... UB V DC
• Rated conditional short-circuit current
  100 A
Test pulses
max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
Switching current
max.50 mA
Type of output
p-switching, short circuit-proof
Risk time according to EN 60947-5-3
max.260 ms
Turn-on time
max.300 ms
Degree of contamination (external, according to EN 60947-1)
3
Safety class
III
Rated impulse withstand voltage Uimp
1,5 kV
EMC protection requirements
In acc. with EN IEC 60947-5-3
Rated insulation voltage Ui
300 V
Fusing
0,25 ... 8 A
Current consumption
max.35 mA
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
Ready delay
0,5 s
Connection
connection cable PUR, length 20m
Switching frequency
max.1 Hz
Tightening torque
max.0,8 Nm
Installation orientation
Any
Mounting distance
min.80 mm
Degree of protection
IP67
Weight
0,7 kg
Mounting method
Surface mounting on metal
Material
NBR 80 ±5 Shore
Housing material
Plastic, PBT
Dynamic bending radius
10 x cable diameter
Cable ambient temperature (dynamic)
-25 ... 65 °C
Static bending radius
5 x cable diameter
Cable ambient temperature (static)
-25 ... 65 °C
Shock and vibration resistance
In acc. with EN 60947-5-3