TS 256-11ZUE Schmersal Electronic Components

Rated insulation voltage Ui32 VDC

Degree of protectionIP65 to EN 60529, IP67 to EN...

Number of auxiliary contacts-

Material of the contacts, electrical-

Gross weight80 g

Switching principle-

Switching frequency-

Rated impulse withstand voltage Uimp0.8 kV

Switching element-

Thermal test current-

Required rated short-circuit current to EN 60947-5-1100 A

Utilisation category AC-15-

Utilisation category DC-13-

Height of sensor25 mm

Ambient temperature, maximum+70 °C

Ambient temperature, minimum-25 °C

Width of sensor106.3 mm

Length of sensor22 mm

Cable section, minimum-

Note (Cable section)-

Cable section, maximum-

Actuating element-

Terminal ConnectorConnector M12, 8-pole

Note (Switchover time)-

Number of safety contacts-

Actuating speed, maximum-

Note Bounce duration-

Actuating speed, minimum-

Safety functionsYes

StandardsIEC 60947-5-3

Enclosure materialPlastic, glass-fibre reinfor...

Positive break force, minimum-

Actuating force, minimum-

Mechanical life, minimum-

Housing construction formBlock

Actuator type to DIN EN 50047-

Current, Utilisation category DC130.05 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119Low

Latching force-

Interfering radiationIEC 61000-6-4

EMC ratingIEC 60947-3

Current, Utilisation category DC120.05 A

Versionsp-type

Voltage drop Ud, maximum2 V

Current leakage Ir0.5 mA

Rated operating current (safety outputs)250 mA

Operating current600 mA

Rated operating voltage, minimum20.4 VDC

Voltage typeDC (direct current)

Rated operating voltage24 VDC −15 % / +10 %

No-load supply current I0100 mA

Protection ratingIII

Overvoltage categoryIII

Restistance to shock30 g / 11 ms

Material temperature resistance of the cable (in motion), minimum-10 °C

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Material temperature resistance (long-term), maximum+105 °C

Note (Repeat accuracy R)Axial offset: The long side ...

Number of fail-safe digital outputs2

Short-circuit recognitionYes

Diagnostic outputYes

Active arealateral

Voltage, Utilisation category DC1224 VDC

Switching frequency, approx.1 Hz

Output current, (fail-safe output), maximum0.25 A

Rated operating voltage, maximum26.4 VDC

Degree of pollution to VDE 01003

Material temperature resistance of the cable (at rest), minimum-30 °C

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ensured switch distance ON Sao10 mm

NoteThe cable section of the int...

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Hysteresis (Switch distance), maximum2 mm

Repeat accuracy R R0.5 mm

MountingA screw length of 25 mm is s...

Actuating panelslateral

Number of semi-conductor outputs with signaling function1

Number of LEDs3

CascadableYes

Integral System Diagnostics, statusYes

Duration of risk, maximum200 ms

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Short circuit detectionYes

Sensor topologySensor for series wiring

Active principleRFID

Installation conditions (mechanical)not flush

general informationUniversal coding

Rated insulation voltage Ui250 V

Degree of protectionIP65 to EN 60529, IP67 to EN...

Number of auxiliary contacts1

Material of the contacts, electricalSilver

Gross weight70 g

Switching principleSlow action with overlapping...

Switching frequency5,000 /h

Rated impulse withstand voltage Uimp6 kV

Switching elementNO contact, NC contact

Thermal test current10 A

Required rated short-circuit current to EN 60947-5-11,000 A

Utilisation category AC-154 A

Utilisation category DC-1324 VDC

Height of sensor62.5 mm

Ambient temperature, maximum+80 °C

Ambient temperature, minimum-30 °C

Width of sensor58 mm

Length of sensor31 mm

Cable section, minimum0.75 mm²

Note (Cable section)All indications about the ca...

Cable section, maximum2.5 mm²

Actuating elementPlunger

Terminal ConnectorScrew connection

Note (Switchover time)Switchover time in accordanc...

Number of safety contacts1

Actuating speed, maximum1 m/s

Note Bounce durationBounce duration in accordanc...

Actuating speed, minimum60 mm/min

Safety functionsYes

StandardsIEC 60947-5-1, EN ISO 13849-...

Enclosure materialPlastic, glass-fibre reinfor...

Positive break force, minimum19 N

Actuating force, minimum9 N

Mechanical life, minimum20,000,000 Operations

Housing construction formNorm construction design

Actuator type to DIN EN 50047B

Current, Utilisation category DC13-

Voltage, Utilisation category DC13-

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119-

Latching force-

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Rated insulation voltage Ui500 V

Degree of protectionIP67 to EN 60529

Number of auxiliary contacts1

Material of the contacts, electricalSilver

Gross weight115 g

Switching principleCreep circuit element

Switching frequency-

Rated impulse withstand voltage Uimp6 kV

Switching elementNO contact, NC contact

Thermal test current10 A

Required rated short-circuit current to EN 60947-5-1-

Utilisation category AC-15-

Utilisation category DC-13-

Height of sensor90 mm

Ambient temperature, maximum+80 °C

Ambient temperature, minimum-30 °C

Width of sensor52 mm

Length of sensor30 mm

Cable section, minimum0.25 mm²

Note (Cable section)-

Cable section, maximum2.5 mm²

Actuating element-

Terminal ConnectorScrew connection

Note (Switchover time)-

Number of safety contacts2

Actuating speed, maximum2 m/s

Note Bounce duration-

Actuating speed, minimum-

Safety functions-

Standards-

Enclosure materialPlastic, glass-fibre reinfor...

Positive break force, minimum10 N

Actuating force, minimum-

Mechanical life, minimum1,000,000 Operations

Housing construction form-

Actuator type to DIN EN 50047-

Current, Utilisation category DC134 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-154 A

Voltage, Utilisation category AC15230 VAC

Cable entry3 x M20 x 1,5

positive break travel8 mm

Number of cable glands3

Coding level according to ISO 14119Low

Latching force30 N

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Rated insulation voltage Ui32 VDC

Degree of protectionIP65 to EN 60529, IP67 to EN...

Number of auxiliary contacts-

Material of the contacts, electrical-

Gross weight80 g

Switching principle-

Switching frequency-

Rated impulse withstand voltage Uimp0.8 kV

Switching element-

Thermal test current-

Required rated short-circuit current to EN 60947-5-1100 A

Utilisation category AC-15-

Utilisation category DC-13-

Height of sensor25 mm

Ambient temperature, maximum+70 °C

Ambient temperature, minimum-25 °C

Width of sensor106.3 mm

Length of sensor22 mm

Cable section, minimum-

Note (Cable section)-

Cable section, maximum-

Actuating element-

Terminal ConnectorConnector M12, 8-pole

Note (Switchover time)-

Number of safety contacts-

Actuating speed, maximum-

Note Bounce duration-

Actuating speed, minimum-

Safety functionsYes

StandardsIEC 60947-5-3

Enclosure materialPlastic, glass-fibre reinfor...

Positive break force, minimum-

Actuating force, minimum-

Mechanical life, minimum-

Housing construction formBlock

Actuator type to DIN EN 50047-

Current, Utilisation category DC130.05 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119Low

Latching force-

Interfering radiationIEC 61000-6-4

EMC ratingIEC 60947-3

Current, Utilisation category DC120.05 A

Versionsp-type

Voltage drop Ud, maximum2 V

Current leakage Ir0.5 mA

Rated operating current (safety outputs)250 mA

Operating current600 mA

Rated operating voltage, minimum20.4 VDC

Voltage typeDC (direct current)

Rated operating voltage24 VDC −15 % / +10 %

No-load supply current I0100 mA

Protection ratingIII

Overvoltage categoryIII

Restistance to shock30 g / 11 ms

Material temperature resistance of the cable (in motion), minimum-10 °C

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Material temperature resistance (long-term), maximum+105 °C

Note (Repeat accuracy R)Axial offset: The long side ...

Number of fail-safe digital outputs2

Short-circuit recognitionYes

Diagnostic outputYes

Active arealateral

Voltage, Utilisation category DC1224 VDC

Switching frequency, approx.1 Hz

Output current, (fail-safe output), maximum0.25 A

Rated operating voltage, maximum26.4 VDC

Degree of pollution to VDE 01003

Material temperature resistance of the cable (at rest), minimum-30 °C

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ensured switch distance ON Sao10 mm

NoteThe cable section of the int...

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Hysteresis (Switch distance), maximum2 mm

Repeat accuracy R R0.5 mm

MountingA screw length of 25 mm is s...

Actuating panelslateral

Number of semi-conductor outputs with signaling function1

Number of LEDs3

CascadableYes

Integral System Diagnostics, statusYes

Duration of risk, maximum200 ms

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Short circuit detectionYes

Sensor topologySensor for series wiring

Active principleRFID

Installation conditions (mechanical)not flush

general informationUniversal coding

Rated insulation voltage Ui250 V

Degree of protectionIP65 to EN 60529, IP67 to EN...

Number of auxiliary contacts1

Material of the contacts, electricalSilver

Gross weight70 g

Switching principleSlow action with overlapping...

Switching frequency5,000 /h

Rated impulse withstand voltage Uimp6 kV

Switching elementNO contact, NC contact

Thermal test current10 A

Required rated short-circuit current to EN 60947-5-11,000 A

Utilisation category AC-154 A

Utilisation category DC-1324 VDC

Height of sensor62.5 mm

Ambient temperature, maximum+80 °C

Ambient temperature, minimum-30 °C

Width of sensor58 mm

Length of sensor31 mm

Cable section, minimum0.75 mm²

Note (Cable section)All indications about the ca...

Cable section, maximum2.5 mm²

Actuating elementPlunger

Terminal ConnectorScrew connection

Note (Switchover time)Switchover time in accordanc...

Number of safety contacts1

Actuating speed, maximum1 m/s

Note Bounce durationBounce duration in accordanc...

Actuating speed, minimum60 mm/min

Safety functionsYes

StandardsIEC 60947-5-1, EN ISO 13849-...

Enclosure materialPlastic, glass-fibre reinfor...

Positive break force, minimum19 N

Actuating force, minimum9 N

Mechanical life, minimum20,000,000 Operations

Housing construction formNorm construction design

Actuator type to DIN EN 50047B

Current, Utilisation category DC13-

Voltage, Utilisation category DC13-

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119-

Latching force-

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-