TS 255-20Z Schmersal Electronic Components

Switching frequency-

Switching principle-

Utilisation category DC-13-

Switching element-

Required rated short-circuit current to EN 60947-5-1100 A

Thermal test current-

Utilisation category AC-15-

Rated impulse withstand voltage Uimp0.8 kV

Ambient temperature, maximum+70 °C

Rated insulation voltage Ui32 VDC

Ambient temperature, minimum-25 °C

Degree of protectionIP65 to EN 60529, IP67 to EN...

Height of sensor25 mm

Width of sensor106.3 mm

Note (Cable section)-

Length of sensor22 mm

Cable section, maximum-

Cable section, minimum-

Note (Switchover time)-

Terminal ConnectorConnector M12, 8-pole

Note Bounce duration-

Positive break force, minimum-

Actuating speed, maximum-

Actuating speed, minimum-

Actuating force, minimum-

Mechanical life, minimum-

StandardsIEC 60947-5-3

Enclosure materialPlastic, glass-fibre reinfor...

Gross weight80 g

Housing construction formBlock

Number of auxiliary contacts-

Material of the contacts, electrical-

Actuating element-

Actuator type to DIN EN 50047-

Enclosure coating material-

Current, Utilisation category DC130.05 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119Low

Latching force-

Number of safety contacts-

Interfering radiationIEC 61000-6-4

EMC ratingIEC 60947-3

Current, Utilisation category DC120.05 A

Versionsp-type

Voltage drop Ud, maximum2 V

Current leakage Ir0.5 mA

Rated operating current (safety outputs)250 mA

Operating current600 mA

Rated operating voltage, minimum20.4 VDC

Voltage typeDC (direct current)

Rated operating voltage24 VDC −15 % / +10 %

No-load supply current I0100 mA

Protection ratingIII

Overvoltage categoryIII

Restistance to shock30 g / 11 ms

Material temperature resistance of the cable (in motion), minimum-10 °C

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Material temperature resistance (long-term), maximum+105 °C

Note (Repeat accuracy R)Axial offset: The long side ...

Number of fail-safe digital outputs2

Short-circuit recognitionYes

Diagnostic outputYes

Active arealateral

Voltage, Utilisation category DC1224 VDC

Switching frequency, approx.1 Hz

Output current, (fail-safe output), maximum0.25 A

Rated operating voltage, maximum26.4 VDC

Degree of pollution to VDE 01003

Material temperature resistance of the cable (at rest), minimum-30 °C

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ensured switch distance ON Sao10 mm

NoteThe cable section of the int...

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Hysteresis (Switch distance), maximum2 mm

Repeat accuracy R R0.5 mm

MountingA screw length of 25 mm is s...

Actuating panelslateral

Number of semi-conductor outputs with signaling function1

Number of LEDs3

CascadableYes

Integral System Diagnostics, statusYes

Duration of risk, maximum200 ms

Safety functionsYes

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Short circuit detectionYes

Sensor topologySensor for series wiring

Active principleRFID

Installation conditions (mechanical)not flush

general informationUniversal coding

Switching frequency5,000 /h

Switching principleCreep circuit element

Utilisation category DC-1324 VDC

Switching elementNormally open contact (NO)

Required rated short-circuit current to EN 60947-5-11,000 A

Thermal test current10 A

Utilisation category AC-15240 VAC

Rated impulse withstand voltage Uimp6 kV

Ambient temperature, maximum+80 °C

Rated insulation voltage Ui500 V

Ambient temperature, minimum-30 °C

Degree of protectionIP65 to EN 60529, IP67 to EN...

Height of sensor75.5 mm

Width of sensor63 mm

Note (Cable section)All indications about the ca...

Length of sensor30 mm

Cable section, maximum2.5 mm²

Cable section, minimum0.75 mm²

Note (Switchover time)Switchover time in accordanc...

Terminal ConnectorScrew connection

Note Bounce durationBounce duration in accordanc...

Positive break force, minimum19 N

Actuating speed, maximum1 m/s

Actuating speed, minimum60 mm/min

Actuating force, minimum9 N

Mechanical life, minimum20,000,000 Operations

StandardsIEC 60947-5-1, EN ISO 13849-...

Enclosure materialZink

Gross weight160 g

Housing construction formNorm construction design

Number of auxiliary contacts2

Material of the contacts, electricalSilver

Actuating elementPlunger

Actuator type to DIN EN 50047B

Enclosure coating materialpainted

Current, Utilisation category DC13-

Voltage, Utilisation category DC13-

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119-

Latching force-

Number of safety contacts-

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Switching frequency-

Switching principleCreep circuit element

Utilisation category DC-13-

Switching elementNO contact, NC contact

Required rated short-circuit current to EN 60947-5-1-

Thermal test current10 A

Utilisation category AC-15-

Rated impulse withstand voltage Uimp6 kV

Ambient temperature, maximum+80 °C

Rated insulation voltage Ui500 V

Ambient temperature, minimum-30 °C

Degree of protectionIP67 to EN 60529

Height of sensor90 mm

Width of sensor52 mm

Note (Cable section)-

Length of sensor30 mm

Cable section, maximum2.5 mm²

Cable section, minimum0.25 mm²

Note (Switchover time)-

Terminal ConnectorScrew connection

Note Bounce duration-

Positive break force, minimum10 N

Actuating speed, maximum2 m/s

Actuating speed, minimum-

Actuating force, minimum-

Mechanical life, minimum1,000,000 Operations

Standards-

Enclosure materialPlastic, glass-fibre reinfor...

Gross weight115 g

Housing construction form-

Number of auxiliary contacts1

Material of the contacts, electricalSilver

Actuating element-

Actuator type to DIN EN 50047-

Enclosure coating material-

Current, Utilisation category DC134 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-154 A

Voltage, Utilisation category AC15230 VAC

Cable entry3 x M20 x 1,5

positive break travel8 mm

Number of cable glands3

Coding level according to ISO 14119Low

Latching force30 N

Number of safety contacts2

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Switching frequency-

Switching principle-

Utilisation category DC-13-

Switching element-

Required rated short-circuit current to EN 60947-5-1100 A

Thermal test current-

Utilisation category AC-15-

Rated impulse withstand voltage Uimp0.8 kV

Ambient temperature, maximum+70 °C

Rated insulation voltage Ui32 VDC

Ambient temperature, minimum-25 °C

Degree of protectionIP65 to EN 60529, IP67 to EN...

Height of sensor25 mm

Width of sensor106.3 mm

Note (Cable section)-

Length of sensor22 mm

Cable section, maximum-

Cable section, minimum-

Note (Switchover time)-

Terminal ConnectorConnector M12, 8-pole

Note Bounce duration-

Positive break force, minimum-

Actuating speed, maximum-

Actuating speed, minimum-

Actuating force, minimum-

Mechanical life, minimum-

StandardsIEC 60947-5-3

Enclosure materialPlastic, glass-fibre reinfor...

Gross weight80 g

Housing construction formBlock

Number of auxiliary contacts-

Material of the contacts, electrical-

Actuating element-

Actuator type to DIN EN 50047-

Enclosure coating material-

Current, Utilisation category DC130.05 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119Low

Latching force-

Number of safety contacts-

Interfering radiationIEC 61000-6-4

EMC ratingIEC 60947-3

Current, Utilisation category DC120.05 A

Versionsp-type

Voltage drop Ud, maximum2 V

Current leakage Ir0.5 mA

Rated operating current (safety outputs)250 mA

Operating current600 mA

Rated operating voltage, minimum20.4 VDC

Voltage typeDC (direct current)

Rated operating voltage24 VDC −15 % / +10 %

No-load supply current I0100 mA

Protection ratingIII

Overvoltage categoryIII

Restistance to shock30 g / 11 ms

Material temperature resistance of the cable (in motion), minimum-10 °C

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Material temperature resistance (long-term), maximum+105 °C

Note (Repeat accuracy R)Axial offset: The long side ...

Number of fail-safe digital outputs2

Short-circuit recognitionYes

Diagnostic outputYes

Active arealateral

Voltage, Utilisation category DC1224 VDC

Switching frequency, approx.1 Hz

Output current, (fail-safe output), maximum0.25 A

Rated operating voltage, maximum26.4 VDC

Degree of pollution to VDE 01003

Material temperature resistance of the cable (at rest), minimum-30 °C

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ensured switch distance ON Sao10 mm

NoteThe cable section of the int...

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Hysteresis (Switch distance), maximum2 mm

Repeat accuracy R R0.5 mm

MountingA screw length of 25 mm is s...

Actuating panelslateral

Number of semi-conductor outputs with signaling function1

Number of LEDs3

CascadableYes

Integral System Diagnostics, statusYes

Duration of risk, maximum200 ms

Safety functionsYes

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Short circuit detectionYes

Sensor topologySensor for series wiring

Active principleRFID

Installation conditions (mechanical)not flush

general informationUniversal coding

Switching frequency5,000 /h

Switching principleCreep circuit element

Utilisation category DC-1324 VDC

Switching elementNormally open contact (NO)

Required rated short-circuit current to EN 60947-5-11,000 A

Thermal test current10 A

Utilisation category AC-15240 VAC

Rated impulse withstand voltage Uimp6 kV

Ambient temperature, maximum+80 °C

Rated insulation voltage Ui500 V

Ambient temperature, minimum-30 °C

Degree of protectionIP65 to EN 60529, IP67 to EN...

Height of sensor75.5 mm

Width of sensor63 mm

Note (Cable section)All indications about the ca...

Length of sensor30 mm

Cable section, maximum2.5 mm²

Cable section, minimum0.75 mm²

Note (Switchover time)Switchover time in accordanc...

Terminal ConnectorScrew connection

Note Bounce durationBounce duration in accordanc...

Positive break force, minimum19 N

Actuating speed, maximum1 m/s

Actuating speed, minimum60 mm/min

Actuating force, minimum9 N

Mechanical life, minimum20,000,000 Operations

StandardsIEC 60947-5-1, EN ISO 13849-...

Enclosure materialZink

Gross weight160 g

Housing construction formNorm construction design

Number of auxiliary contacts2

Material of the contacts, electricalSilver

Actuating elementPlunger

Actuator type to DIN EN 50047B

Enclosure coating materialpainted

Current, Utilisation category DC13-

Voltage, Utilisation category DC13-

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119-

Latching force-

Number of safety contacts-

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-