SRB207AN 24V Schmersal Electronic Components

Product Details

• EMC rating
  EMC-Directive
• Current, Utilisation category DC12
  0.1 A
• Voltage, Utilisation category DC12
  24 VDC
• Conduction resistance, maximum
  40 Ω
• Switching capacity, minimum
  10 mA
• Current, Utilisation category DC13
  6 A
• Current, Utilisation category AC-15
  6 A
• Drop-out delay in case of emergency, typically
  20 ms
• Voltage, Utilisation category AC15
  230 VAC
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Rated control voltage at DC, maximum
  28.8 VDC
• Rated AC voltage for controls, 60 Hz, minimum
  20.4 VAC
• Switching capacity, maximum
  2 A
• Voltage, Utilisation category DC13
  24 VDC
• Pull-in delay at RESET, typically
  20 ms
• Note (Contact resistance)
  in new state
• Drop-out delay in case of power failure, typically
  80 ms
• Contact resistance, maximum
  0.1 Ω
• Electrical power consumption
  3 W
• Rated AC voltage for controls at DC minimum
  20.4 VDC
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Rated operating voltage
24 VAC -15% / +10%, 24 VDC -15%/+20%, residual ripple max. 10%
Rated impulse withstand voltage Uimp
4 kV
Degree of pollution to IEC/EN 60664-1
2
Frequency range
50 Hz, 60 Hz
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Overvoltage category
III
Restistance to shock
30 g / 11 ms
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-40 °C
Ambient temperature, maximum
+45 °C
Number of Snap-in contacts, maximum
6
Ambient temperature, minimum
-25 °C
Number of Snap-in contacts, minimum
1
Degree of protection of the mounting space
IP54
Degree of protection of clips or terminals
IP20
Height
100 mm
Degree of protection of the enclosure
IP40
Depth
121 mm
Width
45 mm
Cable section, maximum
2.5 mm²
Tightening torque of Clips
0.6 Nm
Terminal designations
IEC/EN 60947-1
Mounting
Snaps onto standard DIN rail to EN 60715
Cable section, minimum
0.25 mm²
Terminal Connector
Screw connection, rigid or flexible
Mechanical life, minimum
10,000,000 Operations
Number of signalling outputs
6
Number of LEDs
3
Number of safety contacts
2
Earth connection detection
Yes
Removable Terminals
Yes
Automatic reset function
Yes
Start input
Yes
Reset edge detection
Yes
Integral System Diagnostics, status
Yes
Number of auxiliary contacts
1, 7
Material of the contacts, electrical
AgSn0. self-cleaning, positive drive
Feedback circuit
Yes
Stop-Category
0
Electronic Fuse
Yes
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Standards
IEC 61508, IEC/EN 60204-1, EN 60947-5-1
Wire breakage detection
Yes
Short-circuit recognition
Yes
Gross weight
480 g
Climatic stress
EN 60068-2-78

SRB207AN 24V Related Documents