SRB207AN 230VAC Schmersal Electronic Components

Product Details

• Conduction resistance, maximum
  40 Ω
• Current, Utilisation category DC12
  0.1 A
• Voltage, Utilisation category DC12
  24 VDC
• Current, Utilisation category DC13
  6 A
• Switching capacity, maximum
  2 A
• Switching capacity, minimum
  10 mA
• Switching frequency, maximum
  3 Hz
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Note (Contact resistance)
  in new state
• Current, Utilisation category AC-15
  6 A
• Drop-out delay in case of power failure, typically
  80 ms
• Drop-out delay in case of emergency, typically
  20 ms
• Electrical power consumption
  6.8 W
• Rated AC voltage for controls at DC minimum
  20.4 VDC
• Rated control voltage at AC 50 Hz, maximum
  240 VAC
• Rated control voltage at AC 60 Hz, maximum
  240 VAC
• EMC rating
  EMC-Directive
• Voltage, Utilisation category DC13
  24 VDC
• Pull-in delay at RESET, typically
  20 ms
• Voltage, Utilisation category AC15
  230 VAC
Contact resistance, maximum
0.1 Ω
Rated control voltage at DC, maximum
28.8 VDC
Rated AC voltage for controls, 60 Hz, minimum
48 VAC
Rated operating voltage
48 ... 240 VAC
Rated AC voltage for controls, 50 Hz, minimum
48 VAC
Overvoltage category
III
Restistance to shock
30 g / 11 ms
Frequency range
50 Hz, 60 Hz
Degree of pollution to IEC/EN 60664-1
2
Rated impulse withstand voltage Uimp
4 kV
Storage and transport temperature, minimum
-40 °C
Storage and transport temperature, maximum
+85 °C
Ambient temperature, maximum
+45 °C
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Degree of protection of clips or terminals
IP20
Ambient temperature, minimum
-25 °C
Width
45 mm
Degree of protection of the mounting space
IP54
Height
100 mm
Degree of protection of the enclosure
IP40
Tightening torque of Clips
0.6 Nm
Depth
121 mm
Cable section, maximum
2.5 mm²
Terminal designations
IEC/EN 60947-1
Cable section, minimum
0.25 mm²
Mounting
Snaps onto standard DIN rail to EN 60715
Number of signalling outputs
6
Mechanical life, minimum
10,000,000 Operations
Number of safety contacts
2
Terminal Connector
Screw connection, rigid or flexible
Number of Snap-in contacts, minimum
1
Number of LEDs
3
Number of auxiliary contacts
1, 7
Number of Snap-in contacts, maximum
6
Earth connection detection
Yes
Integral System Diagnostics, status
Yes
Reset edge detection
Yes
Standards
IEC 61508, IEC/EN 60204-1, EN 60947-5-1
Automatic reset function
Yes
Climatic stress
EN 60068-2-78
Wire breakage detection
Yes
Start input
Yes
Feedback circuit
Yes
Removable Terminals
Yes
Stop-Category
0
Electronic Fuse
Yes
Material of the contacts, electrical
AgSn0. self-cleaning, positive drive
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Gross weight
400 g
Short-circuit recognition
Yes

SRB207AN 230VAC Related Documents