161481 Euchner Safety Accessories

Name: 161481
Brand: Euchner
Price: 3376.43 USD
Availability: BackOrder

Part#:161481

Alt. Part#:MGB-L2B-PNA-R-161481

Manufacturer:Euchner

Category:Safety Accessories

Product Lifecycle:Active

Product description

161481 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) with 5 control elements, 7/8" and M12 plugs

Product Details

Weight
8.377556 lb
Series
Spare parts
Product Class
Accessories
Safety Integrity Level
SIL 3 (EN 62061:2005)
Mission time
20
Diagnostic Coverage (DC)
99
PFHD
4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
B10D
0,13 x 10⁶
Performance Level
PL e
Category
4
Switching element
2 pos. driven NC
Version
Emergency stop illuminated
Assured release distance Sar
max.65 mm
Product version number
V3.30.10
Assignment diagram
B1
Bus data protocol
Profinet (IEC 61158 type 10)
Safety data protocol
Profisafe (IEC 61784-3-3)
Fusing
min.1 A Slow blow
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))

Transponder coding

Unicode

Safety class

III

Rated insulation voltage Ui

75 V

Connecting cable

Profinet I/O cable, at least cat. 5e

Degree of contamination (external, according to EN 60947-1)

EMC protection requirements

In accordance with EN 61000-4 and EN 61326-3-1

Rated impulse withstand voltage Uimp

0,5 kV

Current consumption

max.500 mA

Maximum feed-in current in the connection block

max.4000 mA

Guard locking principle

Open-circuit current principle

Locking force FZh

2000 N

Connection

M12 D-coded, screened (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))

Reaction time

max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)

Shock and vibration resistance

In acc. with EN 60947-5-3

Installation orientation

Door hinge DIN right

Housing material

Reinforced plastic, die-cast zinc nickel-plated, stainless steel

Weight

3,1 kg

Mechanical life

0,1 x 10⁶

Switching frequency

0,25 Hz

Ambient temperature

-20 ... 55 °C

Degree of protection

IP54

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 161481 on MQ Automation is $3,376.43. Order now.

About the product

Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;4 illuminated pushbuttons;including adhesive labels;Connection via 7/8" and M12 plugs;including terminal plug for stack light (M12, 5-pin);Pre-assembled on mounting plates;Integrated Profinet RT switch;Unicode

Manufacturer warranty

161481 Euchner

$3,376.43

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$3,376.43

$3,376.43 each

Average response time: 11 minutes

Fast Shipping & Delivery

Secure Payment Processing

Manufacturer warranty

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 161481 with other products

Weight

Series

Product Class

Safety Integrity Level

Mission time

Diagnostic Coverage (DC)

PFHD

B10D

Performance Level

161481

Euchner

161481 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) ...

Weight8.377556 lb

SeriesSpare parts

Product ClassAccessories

Safety Integrity LevelSIL 3 (EN 62061:2005)

Mission time20

Diagnostic Coverage (DC)99

PFHD4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)

B10D0,13 x 10⁶

Performance LevelPL e

Category4

Switching element2 pos. driven NC

VersionEmergency stop illuminated

Assured release distance Sarmax.65 mm

Product version numberV3.30.10

Assignment diagramB1

Bus data protocolProfinet (IEC 61158 type 10)

Safety data protocolProfisafe (IEC 61784-3-3)

Fusingmin.1 A Slow blow

Auxiliary voltage DC24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)

Operating voltage DC24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))

Transponder codingUnicode

Safety classIII

Rated insulation voltage Ui75 V

Connecting cableProfinet I/O cable, at least cat. 5e

Degree of contamination (external, according to EN 60947-1)3

EMC protection requirementsIn accordance with EN 61000-4 and EN 61326-3-1

Rated impulse withstand voltage Uimp0,5 kV

Current consumptionmax.500 mA

Maximum feed-in current in the connection blockmax.4000 mA

Guard locking principleOpen-circuit current principle

Locking force FZh2000 N

ConnectionM12 D-coded, screened (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))

Reaction timemax.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)

Shock and vibration resistanceIn acc. with EN 60947-5-3

Installation orientationDoor hinge DIN right

Housing materialReinforced plastic, die-cast zinc nickel-plated, stainless steel

Weight3,1 kg

Mechanical life0,1 x 10⁶

Switching frequency0,25 Hz

Ambient temperature-20 ... 55 °C

Degree of protectionIP54

B10D-

Mission time-

PFHD-

Performance Level-

Category-

For the approval acc. to UL the following applies-

Version-

Operating current-

Switching element-

Repeat accuracy R-

Detent mechanism-

Discrepancy time-

Off-state current Ir-

Operating voltage-

Switching current-

Type of output-

Safety class-

Turn-on time-

Switching load-

EMC protection requirements-

Output voltage-

Degree of contamination (external, according to EN 60947-1)-

Rated insulation voltage Ui-

Rated impulse withstand voltage Uimp-

Connection rating-

Utilization category acc. to EN 60947-5-2-

Fusing-

Current consumption-

Operating voltage DC-

Overtravel-

Test-pulse interval-

Ambient temperature-

Extraction force-

Test pulses-

Actuating force-

Installation orientation-

Mechanical life-

Shock and vibration resistance-

Housing material-

Approach speed-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Connection-

Mission time-

PFHD-

Category-

Performance Level-

For the approval acc. to UL the following applies-

Additional feature-

Repeat accuracy R-

Discrepancy time-

Output voltage-

Turn-on time-

Off-state current Ir-

Switching current-

Type of output-

Switching load-

Risk time according to EN 60947-5-3-

Safety class-

Degree of contamination (external, according to EN 60947-1)-

Solenoid duty cycle-

EMC protection requirements-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Connection rating-

Fusing-

Solenoid operating voltage DC-

Operating voltage DC-

Utilization category acc. to EN 60947-5-2-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Current consumption-

Extraction force-

Overtravel-

Locking force Fmax-

Approach speed-

Retention force-

Connection-

Locking force FZh-

Guard locking principle-

Mechanical life-

Ambient temperature-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Installation orientation-

Shock and vibration resistance-

Housing material-

12 in stock

122813

Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Safety Integrity Level-

Mission time-

Diagnostic Coverage (DC)-

PFHD-

B10D-

Performance Level-

Category-

Switching element-

Version-

Assured release distance Sar-

Product version number-

Assignment diagram-

Bus data protocol-

Safety data protocol-

Fusing-

Auxiliary voltage DC-

Operating voltage DC-

Transponder coding-

Safety class-

Rated insulation voltage Ui-

Connecting cable-

Degree of contamination (external, according to EN 60947-1)-

EMC protection requirements-

Rated impulse withstand voltage Uimp-

Current consumption-

Maximum feed-in current in the connection block-

Guard locking principle-

Locking force FZh-

Connection-

Reaction time-

Shock and vibration resistance-

Installation orientation-

Housing material-

Weight-

Mechanical life-

Switching frequency-

Ambient temperature-

Degree of protection-

B10D-

Mission time-

PFHD-

Performance Level-

Category-

For the approval acc. to UL the following applies-

Version-

Operating current-

Switching element-

Repeat accuracy R-

Detent mechanism-

Discrepancy time-

Off-state current Ir-

Operating voltage-

Switching current-

Type of output-

Safety class-

Turn-on time-

Switching load-

EMC protection requirements-

Output voltage-

Degree of contamination (external, according to EN 60947-1)-

Rated insulation voltage Ui-

Rated impulse withstand voltage Uimp-

Connection rating-

Utilization category acc. to EN 60947-5-2-

Fusing-

Current consumption-

Operating voltage DC-

Overtravel-

Test-pulse interval-

Ambient temperature-

Extraction force-

Test pulses-

Actuating force-

Installation orientation-

Mechanical life-

Shock and vibration resistance-

Housing material-

Approach speed-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Connection-

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class 2 power supply, or equivalent measures see operating instructions

Additional featureEscape release actuated by pushing

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN IEC 60947-5-3

Output voltage0,8xUB ... UB V DC

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-proof

Switching load24V DC, class 2 (Alternatively see operating instructions)

Risk time according to EN 60947-5-3max.260 ms

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-3

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Connection rating6 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV

Operating voltage DC24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)

Test pulsesmax.1,0 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)

Test-pulse intervalmin.140 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Current consumption40 mA

Extraction force20 N

Overtravel5 mm

Locking force Fmax3900 N

Approach speedmax.20 m/min

Retention force20 N

Connection2 plug connectors M12, 5 and 8-pin

Locking force FZh3000 N (Fzh = Fmax/1.3 Depending on the actuator used)

Guard locking principleClosed-circuit current principle

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Degree of protectionIP67/IP69/IP69K (Screwed tight plug connector/mating component)

Switching frequencymax.0,5 Hz

Weight0,42 kg

Ready delay8 s

Installation orientationAny

Shock and vibration resistanceIn acc. with EN 60947-5-3

Housing materialDie-cast zinc

0 in stock

161481

Euchner

161481 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) ...

Weight8.377556 lb

SeriesSpare parts

Product ClassAccessories

Safety Integrity LevelSIL 3 (EN 62061:2005)

Mission time20

Diagnostic Coverage (DC)99

PFHD4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)

B10D0,13 x 10⁶

Performance LevelPL e

Category4

Switching element2 pos. driven NC

VersionEmergency stop illuminated

Assured release distance Sarmax.65 mm

Product version numberV3.30.10

Assignment diagramB1

Bus data protocolProfinet (IEC 61158 type 10)

Safety data protocolProfisafe (IEC 61784-3-3)

Fusingmin.1 A Slow blow

Auxiliary voltage DC24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)

Operating voltage DC24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))

Transponder codingUnicode

Safety classIII

Rated insulation voltage Ui75 V

Connecting cableProfinet I/O cable, at least cat. 5e

Degree of contamination (external, according to EN 60947-1)3

EMC protection requirementsIn accordance with EN 61000-4 and EN 61326-3-1

Rated impulse withstand voltage Uimp0,5 kV

Current consumptionmax.500 mA

Maximum feed-in current in the connection blockmax.4000 mA

Guard locking principleOpen-circuit current principle

Locking force FZh2000 N

ConnectionM12 D-coded, screened (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))

Reaction timemax.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)

Shock and vibration resistanceIn acc. with EN 60947-5-3

Installation orientationDoor hinge DIN right

Housing materialReinforced plastic, die-cast zinc nickel-plated, stainless steel

Weight3,1 kg

Mechanical life0,1 x 10⁶

Switching frequency0,25 Hz

Ambient temperature-20 ... 55 °C

Degree of protectionIP54

B10D-

Mission time-

PFHD-

Performance Level-

Category-

For the approval acc. to UL the following applies-

Version-

Operating current-

Switching element-

Repeat accuracy R-

Detent mechanism-

Discrepancy time-

Off-state current Ir-

Operating voltage-

Switching current-

Type of output-

Safety class-

Turn-on time-

Switching load-

EMC protection requirements-

Output voltage-

Degree of contamination (external, according to EN 60947-1)-

Rated insulation voltage Ui-

Rated impulse withstand voltage Uimp-

Connection rating-

Utilization category acc. to EN 60947-5-2-

Fusing-

Current consumption-

Operating voltage DC-

Overtravel-

Test-pulse interval-

Ambient temperature-

Extraction force-

Test pulses-

Actuating force-

Installation orientation-

Mechanical life-

Shock and vibration resistance-

Housing material-

Approach speed-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Connection-

Mission time-

PFHD-

Category-

Performance Level-

For the approval acc. to UL the following applies-

Additional feature-

Repeat accuracy R-

Discrepancy time-

Output voltage-

Turn-on time-

Off-state current Ir-

Switching current-

Type of output-

Switching load-

Risk time according to EN 60947-5-3-

Safety class-

Degree of contamination (external, according to EN 60947-1)-

Solenoid duty cycle-

EMC protection requirements-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Connection rating-

Fusing-

Solenoid operating voltage DC-

Operating voltage DC-

Utilization category acc. to EN 60947-5-2-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Current consumption-

Extraction force-

Overtravel-

Locking force Fmax-

Approach speed-

Retention force-

Connection-

Locking force FZh-

Guard locking principle-

Mechanical life-

Ambient temperature-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Installation orientation-

Shock and vibration resistance-

Housing material-

1 in stock

162926

Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Safety Integrity Level-

Mission time-

Diagnostic Coverage (DC)-

PFHD-

B10D-

Performance Level-

Category-

Switching element-

Version-

Assured release distance Sar-

Product version number-

Assignment diagram-

Bus data protocol-

Safety data protocol-

Fusing-

Auxiliary voltage DC-

Operating voltage DC-

Transponder coding-

Safety class-

Rated insulation voltage Ui-

Connecting cable-

Degree of contamination (external, according to EN 60947-1)-

EMC protection requirements-

Rated impulse withstand voltage Uimp-

Current consumption-

Maximum feed-in current in the connection block-

Guard locking principle-

Locking force FZh-

Connection-

Reaction time-

Shock and vibration resistance-

Installation orientation-

Housing material-

Weight-

Mechanical life-

Switching frequency-

Ambient temperature-

Degree of protection-

B10D0,13 x 10⁶

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class 2 power supply, or equivalent measures see operating instructions

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Repeat accuracy R10 %

Detent mechanismSnap-in bolt

Discrepancy timemax.10 ms In acc. with EN IEC 60947-5-3

Off-state current Irmax.0,25 mA

Operating voltage5 ... 24 V

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-switching, short circuit-proof

Safety classIII

Turn-on timemax.400 ms

Switching load24V DC, class 2 (Alternatively see operating instructions)

EMC protection requirementsIn acc. with EN IEC 60947-5-3

Output voltage0 ... 1 V DC

Degree of contamination (external, according to EN 60947-1)3

Rated insulation voltage Ui50 V

Rated impulse withstand voltage Uimp0,5 kV

Connection rating1 W

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)

Fusing0,25 ... 8 A

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV

Overtravel5 mm

Test-pulse intervalmin.100 ms

Ambient temperature-20 ... +55 °C

Extraction force20 N

Test pulsesmax.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)

Actuating force10 N

Installation orientationDoor hinge DIN right

Mechanical life1 x 10⁶

Shock and vibration resistanceIn acc. with EN 60947-5-3

Housing materialFiber glass reinforced thermoplastic

Approach speedmax.20 m/min

Degree of protectionIP65 (Screwed tight plug connector/mating component)

Switching frequencymax.0,5 Hz

Weight1,25 kg

Ready delaymax.1 s

Connection2 plug connectors M12, 5-pin

Mission time-

PFHD-

Category-

Performance Level-

For the approval acc. to UL the following applies-

Additional feature-

Repeat accuracy R-

Discrepancy time-

Output voltage-

Turn-on time-

Off-state current Ir-

Switching current-

Type of output-

Switching load-

Risk time according to EN 60947-5-3-

Safety class-

Degree of contamination (external, according to EN 60947-1)-

Solenoid duty cycle-

EMC protection requirements-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Connection rating-

Fusing-

Solenoid operating voltage DC-

Operating voltage DC-

Utilization category acc. to EN 60947-5-2-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Current consumption-

Extraction force-

Overtravel-

Locking force Fmax-

Approach speed-

Retention force-

Connection-

Locking force FZh-

Guard locking principle-

Mechanical life-

Ambient temperature-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Installation orientation-

Shock and vibration resistance-

Housing material-

12 in stock

122813

Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Safety Integrity Level-

Mission time-

Diagnostic Coverage (DC)-

PFHD-

B10D-

Performance Level-

Category-

Switching element-

Version-

Assured release distance Sar-

Product version number-

Assignment diagram-

Bus data protocol-

Safety data protocol-

Fusing-

Auxiliary voltage DC-

Operating voltage DC-

Transponder coding-

Safety class-

Rated insulation voltage Ui-

Connecting cable-

Degree of contamination (external, according to EN 60947-1)-

EMC protection requirements-

Rated impulse withstand voltage Uimp-

Current consumption-

Maximum feed-in current in the connection block-

Guard locking principle-

Locking force FZh-

Connection-

Reaction time-

Shock and vibration resistance-

Installation orientation-

Housing material-

Weight-

Mechanical life-

Switching frequency-

Ambient temperature-

Degree of protection-

B10D-

Mission time-

PFHD-

Performance Level-

Category-

For the approval acc. to UL the following applies-

Version-

Operating current-

Switching element-

Repeat accuracy R-

Detent mechanism-

Discrepancy time-

Off-state current Ir-

Operating voltage-

Switching current-

Type of output-

Safety class-

Turn-on time-

Switching load-

EMC protection requirements-

Output voltage-

Degree of contamination (external, according to EN 60947-1)-

Rated insulation voltage Ui-

Rated impulse withstand voltage Uimp-

Connection rating-

Utilization category acc. to EN 60947-5-2-

Fusing-

Current consumption-

Operating voltage DC-

Overtravel-

Test-pulse interval-

Ambient temperature-

Extraction force-

Test pulses-

Actuating force-

Installation orientation-

Mechanical life-

Shock and vibration resistance-

Housing material-

Approach speed-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Connection-

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class 2 power supply, or equivalent measures see operating instructions

Additional featureEscape release actuated by pushing

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN IEC 60947-5-3

Output voltage0,8xUB ... UB V DC

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-proof

Switching load24V DC, class 2 (Alternatively see operating instructions)

Risk time according to EN 60947-5-3max.260 ms

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-3

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Connection rating6 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV

Operating voltage DC24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)

Test pulsesmax.1,0 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)

Test-pulse intervalmin.140 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Current consumption40 mA

Extraction force20 N

Overtravel5 mm

Locking force Fmax3900 N

Approach speedmax.20 m/min

Retention force20 N

Connection2 plug connectors M12, 5 and 8-pin

Locking force FZh3000 N (Fzh = Fmax/1.3 Depending on the actuator used)

Guard locking principleClosed-circuit current principle

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Degree of protectionIP67/IP69/IP69K (Screwed tight plug connector/mating component)

Switching frequencymax.0,5 Hz

Weight0,42 kg

Ready delay8 s

Installation orientationAny

Shock and vibration resistanceIn acc. with EN 60947-5-3

Housing materialDie-cast zinc

0 in stock

161481

Euchner

161481 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) ...

Weight8.377556 lb

SeriesSpare parts

Product ClassAccessories

Safety Integrity LevelSIL 3 (EN 62061:2005)

Mission time20

Diagnostic Coverage (DC)99

PFHD4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)

B10D0,13 x 10⁶

Performance LevelPL e

Category4

Switching element2 pos. driven NC

VersionEmergency stop illuminated

Assured release distance Sarmax.65 mm

Product version numberV3.30.10

Assignment diagramB1

Bus data protocolProfinet (IEC 61158 type 10)

Safety data protocolProfisafe (IEC 61784-3-3)

Fusingmin.1 A Slow blow

Auxiliary voltage DC24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)

Operating voltage DC24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))

Transponder codingUnicode

Safety classIII

Rated insulation voltage Ui75 V

Connecting cableProfinet I/O cable, at least cat. 5e

Degree of contamination (external, according to EN 60947-1)3

EMC protection requirementsIn accordance with EN 61000-4 and EN 61326-3-1

Rated impulse withstand voltage Uimp0,5 kV

Current consumptionmax.500 mA

Maximum feed-in current in the connection blockmax.4000 mA

Guard locking principleOpen-circuit current principle

Locking force FZh2000 N

ConnectionM12 D-coded, screened (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))

Reaction timemax.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)

Shock and vibration resistanceIn acc. with EN 60947-5-3

Installation orientationDoor hinge DIN right

Housing materialReinforced plastic, die-cast zinc nickel-plated, stainless steel

Weight3,1 kg

Mechanical life0,1 x 10⁶

Switching frequency0,25 Hz

Ambient temperature-20 ... 55 °C

Degree of protectionIP54

B10D-

Mission time-

PFHD-

Performance Level-

Category-

For the approval acc. to UL the following applies-

Version-

Operating current-

Switching element-

Repeat accuracy R-

Detent mechanism-

Discrepancy time-

Off-state current Ir-

Operating voltage-

Switching current-

Type of output-

Safety class-

Turn-on time-

Switching load-

EMC protection requirements-

Output voltage-

Degree of contamination (external, according to EN 60947-1)-

Rated insulation voltage Ui-

Rated impulse withstand voltage Uimp-

Connection rating-

Utilization category acc. to EN 60947-5-2-

Fusing-

Current consumption-

Operating voltage DC-

Overtravel-

Test-pulse interval-

Ambient temperature-

Extraction force-

Test pulses-

Actuating force-

Installation orientation-

Mechanical life-

Shock and vibration resistance-

Housing material-

Approach speed-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Connection-

Mission time-

PFHD-

Category-

Performance Level-

For the approval acc. to UL the following applies-

Additional feature-

Repeat accuracy R-

Discrepancy time-

Output voltage-

Turn-on time-

Off-state current Ir-

Switching current-

Type of output-

Switching load-

Risk time according to EN 60947-5-3-

Safety class-

Degree of contamination (external, according to EN 60947-1)-

Solenoid duty cycle-

EMC protection requirements-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Connection rating-

Fusing-

Solenoid operating voltage DC-

Operating voltage DC-

Utilization category acc. to EN 60947-5-2-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Current consumption-

Extraction force-

Overtravel-

Locking force Fmax-

Approach speed-

Retention force-

Connection-

Locking force FZh-

Guard locking principle-

Mechanical life-

Ambient temperature-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Installation orientation-

Shock and vibration resistance-

Housing material-

1 in stock

162926

Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Safety Integrity Level-

Mission time-

Diagnostic Coverage (DC)-

PFHD-

B10D-

Performance Level-

Category-

Switching element-

Version-

Assured release distance Sar-

Product version number-

Assignment diagram-

Bus data protocol-

Safety data protocol-

Fusing-

Auxiliary voltage DC-

Operating voltage DC-

Transponder coding-

Safety class-

Rated insulation voltage Ui-

Connecting cable-

Degree of contamination (external, according to EN 60947-1)-

EMC protection requirements-

Rated impulse withstand voltage Uimp-

Current consumption-

Maximum feed-in current in the connection block-

Guard locking principle-

Locking force FZh-

Connection-

Reaction time-

Shock and vibration resistance-

Installation orientation-

Housing material-

Weight-

Mechanical life-

Switching frequency-

Ambient temperature-

Degree of protection-

B10D0,13 x 10⁶

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class 2 power supply, or equivalent measures see operating instructions

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Repeat accuracy R10 %

Detent mechanismSnap-in bolt

Discrepancy timemax.10 ms In acc. with EN IEC 60947-5-3

Off-state current Irmax.0,25 mA

Operating voltage5 ... 24 V

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-switching, short circuit-proof

Safety classIII

Turn-on timemax.400 ms

Switching load24V DC, class 2 (Alternatively see operating instructions)

EMC protection requirementsIn acc. with EN IEC 60947-5-3

Output voltage0 ... 1 V DC

Degree of contamination (external, according to EN 60947-1)3

Rated insulation voltage Ui50 V

Rated impulse withstand voltage Uimp0,5 kV

Connection rating1 W

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)

Fusing0,25 ... 8 A

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV

Overtravel5 mm

Test-pulse intervalmin.100 ms

Ambient temperature-20 ... +55 °C

Extraction force20 N

Test pulsesmax.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)

Actuating force10 N

Installation orientationDoor hinge DIN right

Mechanical life1 x 10⁶

Shock and vibration resistanceIn acc. with EN 60947-5-3

Housing materialFiber glass reinforced thermoplastic

Approach speedmax.20 m/min

Degree of protectionIP65 (Screwed tight plug connector/mating component)

Switching frequencymax.0,5 Hz

Weight1,25 kg

Ready delaymax.1 s

Connection2 plug connectors M12, 5-pin

Mission time-

PFHD-

Category-

Performance Level-

For the approval acc. to UL the following applies-

Additional feature-

Repeat accuracy R-

Discrepancy time-

Output voltage-

Turn-on time-

Off-state current Ir-

Switching current-

Type of output-

Switching load-

Risk time according to EN 60947-5-3-

Safety class-

Degree of contamination (external, according to EN 60947-1)-

Solenoid duty cycle-

EMC protection requirements-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Connection rating-

Fusing-

Solenoid operating voltage DC-

Operating voltage DC-

Utilization category acc. to EN 60947-5-2-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Current consumption-

Extraction force-

Overtravel-

Locking force Fmax-

Approach speed-

Retention force-

Connection-

Locking force FZh-

Guard locking principle-

Mechanical life-

Ambient temperature-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Installation orientation-

Shock and vibration resistance-

Housing material-

12 in stock

122813

Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Safety Integrity Level-

Mission time-

Diagnostic Coverage (DC)-

PFHD-

B10D-

Performance Level-

Category-

Switching element-

Version-

Assured release distance Sar-

Product version number-

Assignment diagram-

Bus data protocol-

Safety data protocol-

Fusing-

Auxiliary voltage DC-

Operating voltage DC-

Transponder coding-

Safety class-

Rated insulation voltage Ui-

Connecting cable-

Degree of contamination (external, according to EN 60947-1)-

EMC protection requirements-

Rated impulse withstand voltage Uimp-

Current consumption-

Maximum feed-in current in the connection block-

Guard locking principle-

Locking force FZh-

Connection-

Reaction time-

Shock and vibration resistance-

Installation orientation-

Housing material-

Weight-

Mechanical life-

Switching frequency-

Ambient temperature-

Degree of protection-

B10D-

Mission time-

PFHD-

Performance Level-

Category-

For the approval acc. to UL the following applies-

Version-

Operating current-

Switching element-

Repeat accuracy R-

Detent mechanism-

Discrepancy time-

Off-state current Ir-

Operating voltage-

Switching current-

Type of output-

Safety class-

Turn-on time-

Switching load-

EMC protection requirements-

Output voltage-

Degree of contamination (external, according to EN 60947-1)-

Rated insulation voltage Ui-

Rated impulse withstand voltage Uimp-

Connection rating-

Utilization category acc. to EN 60947-5-2-

Fusing-

Current consumption-

Operating voltage DC-

Overtravel-

Test-pulse interval-

Ambient temperature-

Extraction force-

Test pulses-

Actuating force-

Installation orientation-

Mechanical life-

Shock and vibration resistance-

Housing material-

Approach speed-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Connection-

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class 2 power supply, or equivalent measures see operating instructions

Additional featureEscape release actuated by pushing

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN IEC 60947-5-3

Output voltage0,8xUB ... UB V DC

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-proof

Switching load24V DC, class 2 (Alternatively see operating instructions)

Risk time according to EN 60947-5-3max.260 ms

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-3

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Connection rating6 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV

Operating voltage DC24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)

Test pulsesmax.1,0 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)

Test-pulse intervalmin.140 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Current consumption40 mA

Extraction force20 N

Overtravel5 mm

Locking force Fmax3900 N

Approach speedmax.20 m/min

Retention force20 N

Connection2 plug connectors M12, 5 and 8-pin

Locking force FZh3000 N (Fzh = Fmax/1.3 Depending on the actuator used)

Guard locking principleClosed-circuit current principle

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Degree of protectionIP67/IP69/IP69K (Screwed tight plug connector/mating component)

Switching frequencymax.0,5 Hz

Weight0,42 kg

Ready delay8 s

Installation orientationAny

Shock and vibration resistanceIn acc. with EN 60947-5-3

Housing materialDie-cast zinc

0 in stock

161481

Euchner

161481 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) ...

Weight8.377556 lb

SeriesSpare parts

Product ClassAccessories

Safety Integrity LevelSIL 3 (EN 62061:2005)

Mission time20

Diagnostic Coverage (DC)99

PFHD4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)

B10D0,13 x 10⁶

Performance LevelPL e

Category4

Switching element2 pos. driven NC

VersionEmergency stop illuminated

Assured release distance Sarmax.65 mm

Product version numberV3.30.10

Assignment diagramB1

Bus data protocolProfinet (IEC 61158 type 10)

Safety data protocolProfisafe (IEC 61784-3-3)

Fusingmin.1 A Slow blow

Auxiliary voltage DC24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)

Operating voltage DC24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))

Transponder codingUnicode

Safety classIII

Rated insulation voltage Ui75 V

Connecting cableProfinet I/O cable, at least cat. 5e

Degree of contamination (external, according to EN 60947-1)3

EMC protection requirementsIn accordance with EN 61000-4 and EN 61326-3-1

Rated impulse withstand voltage Uimp0,5 kV

Current consumptionmax.500 mA

Maximum feed-in current in the connection blockmax.4000 mA

Guard locking principleOpen-circuit current principle

Locking force FZh2000 N

ConnectionM12 D-coded, screened (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))

Reaction timemax.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)

Shock and vibration resistanceIn acc. with EN 60947-5-3

Installation orientationDoor hinge DIN right

Housing materialReinforced plastic, die-cast zinc nickel-plated, stainless steel

Weight3,1 kg

Mechanical life0,1 x 10⁶

Switching frequency0,25 Hz

Ambient temperature-20 ... 55 °C

Degree of protectionIP54

B10D-

Mission time-

PFHD-

Performance Level-

Category-

For the approval acc. to UL the following applies-

Version-

Operating current-

Switching element-

Repeat accuracy R-

Detent mechanism-

Discrepancy time-

Off-state current Ir-

Operating voltage-

Switching current-

Type of output-

Safety class-

Turn-on time-

Switching load-

EMC protection requirements-

Output voltage-

Degree of contamination (external, according to EN 60947-1)-

Rated insulation voltage Ui-

Rated impulse withstand voltage Uimp-

Connection rating-

Utilization category acc. to EN 60947-5-2-

Fusing-

Current consumption-

Operating voltage DC-

Overtravel-

Test-pulse interval-

Ambient temperature-

Extraction force-

Test pulses-

Actuating force-

Installation orientation-

Mechanical life-

Shock and vibration resistance-

Housing material-

Approach speed-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Connection-

Mission time-

PFHD-

Category-

Performance Level-

For the approval acc. to UL the following applies-

Additional feature-

Repeat accuracy R-

Discrepancy time-

Output voltage-

Turn-on time-

Off-state current Ir-

Switching current-

Type of output-

Switching load-

Risk time according to EN 60947-5-3-

Safety class-

Degree of contamination (external, according to EN 60947-1)-

Solenoid duty cycle-

EMC protection requirements-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Connection rating-

Fusing-

Solenoid operating voltage DC-

Operating voltage DC-

Utilization category acc. to EN 60947-5-2-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Current consumption-

Extraction force-

Overtravel-

Locking force Fmax-

Approach speed-

Retention force-

Connection-

Locking force FZh-

Guard locking principle-

Mechanical life-

Ambient temperature-

Degree of protection-

Switching frequency-

Weight-

Ready delay-

Installation orientation-

Shock and vibration resistance-

Housing material-

About the manufacturer

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.