136627 Euchner Electronic Components

Product Details

• PFHD
  4.1 x 10 ⁻⁹
• Category
  4
• Mission time
  20 y
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures see operating instructions
• Performance Level
  PL e
• Repeat accuracy R
  10 %
• Discrepancy time
  max.10 ms In acc. with EN IEC 60947-5-3
• Additional feature
  Escape release actuated by pushing
• Turn-on time
  max.400 ms
• Off-state current Ir
  max.0,25 mA
• Switching current
  1 ... 150 mA
• Output voltage
  UB-1,5 ... UB V DC
• Type of output
  2 semiconductor outputs, p-switching, short circuit-proof
• Switching load
  24V DC, class 2 (Alternatively see operating instructions)
• Degree of contamination (external, according to EN 60947-1)
  3
• Solenoid duty cycle
  100 %
• Safety class
  III
• EMC protection requirements
  In acc. with EN IEC 60947-5-3
• Rated impulse withstand voltage Uimp
  0,5 kV
• Fusing
  0,25 ... 8 A
Rated insulation voltage Ui
50 V
Solenoid operating voltage DC
24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Connection rating
6 W
Utilization category acc. to EN 60947-5-2
24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Operating voltage DC
24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Current consumption
40 mA
Test pulses
max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
Test-pulse interval
min.100 ms
Overtravel
5 mm
Locking force FZh
3000 N (Fzh = Fmax/1.3 Depending on the actuator used)
Extraction force
20 N
Locking force Fmax
3900 N
Actuating force
10 N
Approach speed
max.20 m/min
Guard locking principle
Closed-circuit current principle
Shock and vibration resistance
In acc. with EN 60947-5-3
Retention force
20 N
Connection
2 plug connectors M12, 5-pin + pin 5 not used
Housing material
Die-cast zinc
Mechanical life
1 x 10⁶
Installation orientation
Any
Degree of protection
IP67/IP69/IP69K (Screwed tight plug connector/mating component)
Weight
0,42 kg
Ambient temperature
-20 ... +55 °C
Ready delay
max.1 s
Switching frequency
max.0,5 Hz