113615 Euchner Safety Accessories

Product Details

• Weight
  7.65664526 lb
• Series
  Spare parts
• Product Class
  Accessories
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Mission time
  20
• Category
  4
• Product version number
  V3.30.10
• Diagnostic Coverage (DC)
  99
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Performance Level
  PL e
• Switching element
  1NO
• Assignment diagram
  B4
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Version
  Key-operated switch
• Assured release distance Sar
  max.65 mm
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Fusing
  min.1 A Slow blow
• Transponder coding
  Unicode
Degree of contamination (external, according to EN 60947-1)
3
Connection
7/8" Power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Safety class
III
Connecting cable
Profinet I/O cable, at least cat. 5e
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Rated impulse withstand voltage Uimp
0,5 kV
Maximum feed-in current in the connection block
max.4000 mA
Rated insulation voltage Ui
75 V
Current consumption
max.500 mA
Weight
3,1 kg
Degree of protection
IP54
Ambient temperature
-20 ... 55 °C
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Switching frequency
0,25 Hz
Installation orientation
Door hinge DIN left
Shock and vibration resistance
In acc. with EN 60947-5-3
Mechanical life
0,1 x 10⁶
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel