113612 Euchner Safety Accessories

Product Details

• Weight
  8.11520622 lb
• Series
  Spare parts
• Product Class
  Accessories
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Diagnostic Coverage (DC)
  99
• Performance Level
  PL e
• Category
  4
• Switching element
  1NO
• Version
  Key-operated switch
• Assignment diagram
  L1
• Product version number
  V3.30.10
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Fusing
  min.1 A Slow blow
• Assured release distance Sar
  max.65 mm
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Transponder coding
  Unicode
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Maximum feed-in current in the connection block
max.4000 mA
Safety class
III
Connecting cable
Profinet I/O cable, at least cat. 5e
Rated impulse withstand voltage Uimp
0,5 kV
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Degree of contamination (external, according to EN 60947-1)
3
Current consumption
max.500 mA
Rated insulation voltage Ui
75 V
Locking force FZh
2000 N
Guard locking principle
Closed-circuit current principle
Connection
7/8" Power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Switching frequency
0,25 Hz
Degree of protection
IP54
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Mechanical life
0,1 x 10⁶
Shock and vibration resistance
In acc. with EN 60947-5-3
Ambient temperature
-20 ... 55 °C
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Weight
3,1 kg
Installation orientation
Door hinge DIN right