113614 Euchner Safety Accessories

Product Details

• Weight
  7.66325912 lb
• Series
  Spare parts
• Product Class
  Accessories
• Diagnostic Coverage (DC)
  99
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Performance Level
  PL e
• Product version number
  V3.30.10
• Version
  Key-operated switch
• Category
  4
• Switching element
  1NO
• Assignment diagram
  L1
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Assured release distance Sar
  max.65 mm
• Fusing
  min.1 A Slow blow
• Connecting cable
  Profinet I/O cable, at least cat. 5e
• Transponder coding
  Unicode
• Safety class
  III
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Rated impulse withstand voltage Uimp
0,5 kV
Maximum feed-in current in the connection block
max.4000 mA
Rated insulation voltage Ui
75 V
Shock and vibration resistance
In acc. with EN 60947-5-3
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Connection
M12 D-coded, screened (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Current consumption
max.500 mA
Ambient temperature
-20 ... 55 °C
Weight
3,1 kg
Mechanical life
0,1 x 10⁶
Degree of protection
IP54
Switching frequency
0,25 Hz
Installation orientation
Door hinge DIN right
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)