109046 Euchner Electronic Components

Product Details

• Switching hysteresis
  min.1 mm
• Assured operating distance Sao
  min.14 mm
• Assured release distance Sar
  max.60 mm
• Operating distance
  19 mm
• Mission time
  20
• PFHD
  1.9 x 10⁻⁹
• Category
  4
• Performance Level
  PL e
• Off-state current Ir
  max.0,25 mA
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Repeat accuracy R
  ≤ 10
• Rated conditional short-circuit current
  100 A
• Discrepancy time
  max.10 ms
• Utilization category acc. to EN 60947-5-2
  24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
• Test-pulse interval
  min.140 ms
• Test pulses
  max.1 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Output voltage
  0,8 x UB ... UB V DC
• Switching current
  max.50 mA
• Risk time according to EN 60947-5-3
  max.260 ms
• Type of output
  p-switching, short circuit-proof
Turn-on time
max.400 ms
Safety class
III
EMC protection requirements
In acc. with EN IEC 60947-5-3
Degree of contamination (external, according to EN 60947-1)
3
Rated impulse withstand voltage Uimp
1,5 kV
Rated insulation voltage Ui
75 V
Fusing
0,25 ... 8 A
Current consumption
max.50 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
Extension of risk time according to EN 60947-5-3 per device
max.5 ms
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5 %
Connection
connection cable PUR, length 5m
Switching frequency
max.1 Hz
Ready delay
10 s
Tightening torque
max.1 Nm
Installation orientation
Any
Mounting distance
min.120 mm
Dynamic bending radius
10 x cable diameter
Mounting method
Surface mounting on metal
Shock and vibration resistance
In acc. with EN 60947-5-3
Housing material
Plastic, PBT
Static bending radius
5 x cable diameter
Weight
0,2 kg
Cable ambient temperature (dynamic)
-25 ... 65 °C
Degree of protection
IP67, IP69K
Cable ambient temperature (static)
-30 ... 65 °C