804-303 WAGO Industrial Automation Components

WAGO 804-303 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal and rated voltages of 320V in overvoltage category III/2 and 630V in category II/2, with a rated impulse voltage of 4kV across both categories. The rated current is 24A according to IEC/EN standards, while under UL 1059 and CSA standards, it has a rated voltage of 300V and a rated current of 10A for both Use Group B and D. This connector offers three connection points, supports a single connection type with one level, and utilizes Push-in CAGE CLAMP technology with push-button actuation. It accommodates solid and fine-stranded conductors ranging from 0.25 to 2.5mm2 (20 to 12 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules. The strip length for connection is specified between 10 to 11mm, and the conductor connection direction to PCB is 0° with a pole number of 3. Physically, it has a pin spacing of 7.5mm, dimensions of 21.5mm in width, 18.1mm in height, 15mm in depth, and a height from the surface of 14.5mm. The solder pin length is 3.6mm with dimensions of 0.8 x 0.6mm and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. The connector is gray, made from Polyamide (PA66) with a flammability class of V0, and uses Chrome-Nickel spring steel for the clamping spring and Electrolytic Copper with tin plating for contacts. It has a fire load of 0.069MJ and weighs 3.6g. Designed to operate within a temperature range of -60 to +105°C, it complies with RoHS without exemptions. The product is part of WAGO's Product Group 4, packaged in boxes of 220 pieces, with a country of origin in CH and a GTIN of 4044918515405.