804-102 WAGO Industrial Automation Components

WAGO 804-102 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal voltages of 250V (III/3), 320V (III/2), and 630V (II/2), with a rated impulse voltage of 4kV for all categories and a rated current of 24A. UL and CSA approvals include a rated voltage of 300V and a rated current of 10A for both Use Group B and D. The connector has 2 connection points, supports 2 potentials, and utilizes a single connection type across one level. The push-in CAGE CLAMP connection technology is activated by a push-button and accommodates solid and fine-stranded conductors ranging from 0.25 to 2.5mm2 (20 to 12 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules. The strip length for connection is specified as 10 to 11mm (0.39 to 0.43 inches), with a conductor connection direction to PCB at 0° and a pole number of 2. Physical specifications include a pin spacing of 5mm (0.197 inches), width of 11.5mm (0.453 inches), height of 18.1mm (0.713 inches) with a height from the surface of 14.5mm (0.571 inches), and depth of 15mm (0.591 inches). The solder pin length is 3.6mm, with dimensions of 0.8 x 0.6mm and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. It features a THT PCB contact with a staggered solder pin arrangement and two solder pins per potential. The connector is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring and Electrolytic Copper (ECu) with tin plating for contacts. It has a fire load of 0.052MJ and weighs 2.2g. The operating temperature range is -60 to +105°C. It is RoHS compliant without exemptions, packaged in boxes of 420 pieces, and has a GTIN of 4044918514934 with a customs tariff number of 85369010000. The country of origin is CH.