2706-310 WAGO Industrial Automation Components

WAGO 2706-310 is an automation part with a short circuit breaking rating and electrical data compliant with IEC/EN 60664-1 standards, featuring a nominal voltage of 1000V for overvoltage categories III/2 and III/3, and a rated impulse voltage of 8kV. It has a rated current of 41A according to IEC/EN standards. Under UL 1059 approvals, it has rated voltages of 300V and 600V for Use Groups B and C respectively, with a rated current of 30A for both groups. This part offers 10 connection points, with a single connection type and level, utilizing CAGE CLAMP technology with lever actuation. It supports solid and fine-stranded conductors ranging from 0.5 to 6mm2 (20 to 10 AWG), including those with insulated or uninsulated ferrules, and specifies a strip length of 11 to 12mm. The conductor connection direction to PCB is 30 degrees, with a pole number of 10. Physically, it has a pin spacing of 12.5mm, dimensions of 120mm in width, 30mm in height, 26mm in depth, and a height from the surface of 25.5mm. The solder pin length is 4.5mm, with a drilled hole diameter of 1.8 (+0.1)mm. It features THT PCB contact, in-line solder pin arrangement, and two solder pins per potential. The part is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel and Electrolytic Copper with tin plating for its clamping spring and contact materials, respectively. It has a fire load of 1.552MJ and weighs 69.1g. Designed to operate within a temperature range of -60 to +105°C, it is RoHS compliant without exemptions. Packaged in boxes of 10 pieces, it is manufactured in Poland with a GTIN of 4050821093527 and a customs tariff number of 85369010000.