2706-107 WAGO Industrial Automation Components

WAGO 2706-107 is an automation part with a short circuit breaking rating and electrical data adhering to IEC/EN 60664-1 standards. It features nominal voltages of 500V (III/3), 630V (III/2), and 1000V (II/2), with rated impulse voltages of 6kV for both III/3 and III/2 categories, and a rated surge voltage of 6kV for category II/2. The rated current is 41A. According to UL 1059 standards, it has rated voltages of 300V for Use Group B, 150V for Use Group C, and 300V for Use Group D, with a rated current of 30A for all groups. The part includes 7 connection points, a single connection type with CAGE CLAMP technology, lever actuation, and accommodates solid and fine-stranded conductors ranging from 0.5 to 6mm2 (20 to 10 AWG), including those with insulated or uninsulated ferrules. The strip length for connections is 11 to 12mm, with a conductor connection direction to PCB at 30 degrees. It has a pin spacing of 7.5mm, dimensions of 52.5mm in width, 30mm in height, 26mm in depth, and a height from the surface of 25.5mm. The solder pin length is 4.5mm, with a drilled hole diameter of 1.8 (+0.1)mm. It features THT PCB contact, in-line solder pin arrangement, and two solder pins per potential. The part is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel for the clamping spring and Electrolytic Copper with tin plating for contacts. It has a fire load of 0.721MJ and weighs 36.4g. It operates within a temperature range of -60 to +105°C. Packaged in boxes of 20 pieces, it is manufactured in Poland with a GTIN of 4050821093039 and a customs tariff number of 85369010000. It complies with RoHS without exemptions.