250-306 WAGO Industrial Automation Components

WAGO 250-306 is an automation part with a short circuit breaking rating and electrical data that adhere to IEC/EN 60664-1 standards. It features nominal voltages of 100V (III/3), 160V (III/2), and 320V (II/2), with rated impulse and surge voltages of 2.5kV across different overvoltage categories and pollution degrees. The rated current is 4A according to IEC/EN standards. Under UL 1059 approvals, it has rated voltages of 300V and rated currents of 5A for both Use Groups B and D. CSA approvals indicate rated voltages of 300V and rated currents of 2A for Use Groups B and D. This part includes 6 connection points, supports a single connection type with one level, and utilizes Push-in CAGE CLAMP technology with push-button actuation. It accommodates solid and fine-stranded conductors ranging from 0.14 to 0.5mm2 (24 to 20 AWG), with a conductor connection direction to PCB at 45 degrees and a pole number of 6. Physical specifications include a pin spacing of 2.5mm, dimensions of 16.5mm in width, 16.7mm in height, 13.1mm height from the surface, and 12mm in depth, with solder pin length of 3.6mm and dimensions of 0.4 x 0.75mm. The drilled hole diameter with tolerance is 1.1 (+0.1)mm. It features a THT PCB contact, in-line solder pin arrangement, and one solder pin per potential. The part is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses a copper alloy for the clamping spring and tin for contact plating. It has a fire load of 0.054MJ and weighs 2.2g. It operates within a temperature range of -60 to +105°C. Packaged in boxes of 280 pieces, it is manufactured in CH, with a GTIN of 4050821573128 and a customs tariff number of 85369010000. It complies with RoHS without exemptions.