250-205 WAGO Industrial Automation Components

WAGO 250-205 is an automation part with a short circuit breaking rating and electrical data adhering to IEC/EN 60664-1 standards, including nominal voltages of 250V (III/3), 320V (III/2), and 630V (II/2), with rated impulse and surge voltages of 4kV across different overvoltage categories and pollution degrees. It has a rated current of 8A per IEC/EN standards. UL and CSA approvals specify rated voltages of 300V and rated currents up to 10A, varying by use group. This part features 5 connection points, a single connection type with push-in CAGE CLAMP technology, and push-button actuation for solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 or 24 to 16 AWG, including options for ferruled conductors. The strip length for connections is specified between 8.5 and 9.5mm, with a conductor connection direction to PCB at 45 degrees and a pole number of 5. Physically, it has a pin spacing of 3.5mm, dimensions of 19mm in width, 16.7mm in height, 13.1mm height from the surface, and 12mm in depth, with solder pin length of 3.4mm and dimensions of 0.4 x 0.75mm. The drilled hole diameter with tolerance is 1.1 (+0.1)mm. It utilizes THT PCB contact with a staggered solder pin arrangement and one solder pin per potential. The part is gray, made from Polyamide (PA66) with a flammability class of V0, and uses a copper alloy for the clamping spring and tin for contact plating. It weighs 2.5g and has a fire load of 0.056MJ. Designed to operate within a temperature range of -60 to +105°C, it complies with RoHS without exemptions. Packaged in boxes of 240 pieces, it has a GTIN of 4044918648448 and a customs tariff number of 85369010000, with its country of origin being CH.