250-104 WAGO Industrial Automation Components

WAGO 250-104 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal and rated voltages of 160V in overvoltage category III with a pollution degree of 2, and 320V in overvoltage category II, both with a rated impulse voltage of 2.5kV. The rated current is 8A according to IEC/EN standards. Under UL 1059, it has a rated voltage of 300V and a rated current of 5A for both Use Groups B and D, while CSA approvals indicate a rated voltage of 300V and a rated current of 10A for these groups. The connector has 4 connection points, supports a single connection type across one level, and utilizes Push-in CAGE CLAMP technology with push-button actuation. It accommodates solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules from 0.25 to 1mm2. The strip length for connection is between 8.5 and 9.5mm, with a conductor connection direction to PCB at 45 degrees and a pole number of 4. Physically, it has a pin spacing of 3.5mm, dimensions of 15.5mm in width, 16.7mm in height, 13.1mm height from the surface, and 12mm in depth, with solder pin length of 3.4mm and dimensions of 0.4 x 0.75mm. The drilled hole diameter with tolerance is 1.1 (+0.1)mm. It features a THT PCB contact, in-line solder pin arrangement, and one solder pin per potential. The connector is gray, made from Polyamide (PA66) with a flammability class of V0, and uses a copper alloy for the clamping spring and tin for contact plating. It has a fire load of 0.046MJ and weighs 2g. It operates within a temperature range of -60 to +105°C. Packaged in boxes, it comes in quantities of 300 (75) pcs per box, with a country of origin of CH, GTIN 4044918647151, and a customs tariff number of 85369010000. It is RoHS compliant without exemption.