250-120 WAGO Industrial Automation Components

WAGO 250-120 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal and rated voltages of 160V in overvoltage category III/2 and 320V in category II/2, with a rated impulse voltage of 2.5kV for both categories. The rated current is 8A according to IEC/EN standards. Under UL 1059, it has a rated voltage of 300V and a rated current of 5A for both Use Groups B and D, while CSA approvals indicate a rated voltage of 300V and a rated current of 10A for these groups. This part includes 20 connection points and potentials, with a single connection type and level. The push-in CAGE CLAMP connection technology is actuated by a push-button, accommodating solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), and ferruled conductors from 0.25 to 1mm2. The strip length for connections is between 8.5 and 9.5mm, with a conductor connection direction to PCB at 45 degrees and a pole number of 20. Physically, it has a pin spacing of 3.5mm, a width of 71.5mm, a height of 16.7mm, a depth of 12mm, and solder pin dimensions of 0.4 x 0.75mm. The terminal strip supports THT PCB contact with one solder pin per potential. It is made from gray Polyamide (PA66) with a flammability class of V0, and the clamping spring is a copper alloy with tin plating. The part operates within a temperature range of -60 to +105°C, weighs 9.3g, and is RoHS compliant without exemptions. It is packaged in boxes of 60 pieces, with a country of origin in CH and a customs tariff number of 85369010000.