237-146 WAGO Industrial Automation Components

WAGO 237-146 is an automation part featuring a short circuit breaking rating as per IEC/EN 60664-1 standards, with a rated voltage of 800V (III/2), rated impulse voltage of 2.5kV (III/2), and a rated current of 16A. It is categorized under overvoltage category III and pollution degree 2. This part has 3 connection points, supports a total of 3 potentials, and offers 1 type of connection across 1 level, utilizing screw connection technology that requires an operating tool for actuation. It accommodates solid and fine-stranded conductors ranging from 0.5 to 2.5mm2 (20 to 14 AWG) with a strip length of 5 to 7mm (0.2 to 0.28 inches) and a conductor connection direction to PCB at 0°. The pole number for connection 1 is 3. Physically, it has a pin spacing of 5mm (0.197 inches), a width of 15mm (0.591 inches), a height from the surface of 11mm (0.433 inches), and a depth of 9mm (0.354 inches), with solder pin length and diameter of 4.5mm and 1mm, respectively. It supports plugging without loss of pin spacing, THT PCB contact, in-line solder pin arrangement, and one solder pin per potential. The part is gray, made from Polyamide (PA66) in the material group I, with a flammability class of V0 according to UL94 standards. The clamping spring is made of Chrome-Nickel spring steel (CrNi), and the contact material is Electrolytic Copper (ECu) with tin plating. It has a fire load of 0.096MJ and weighs 3.6g. Designed to operate within a temperature range of -60 to +105°C, it comes in boxes of 300 pieces (100 pieces per SPU), manufactured in India, with a GTIN of 4045454539979 and a customs tariff number of 85369010000. It complies with environmental standards including RoHS, with an exemption under 6(c), and has multiple SCIP notification numbers for various EU countries.