237-136 WAGO Terminal Blocks

WAGO 237-136 is a printed circuit connector with a rated voltage of 250V, rated impulse voltage of 2.5kV, and a rated current of 16A, adhering to IEC/EN 60664-1 standards with an overvoltage category III and pollution degree 2. It features 6 connection points and supports the same number of potentials, with a single connection type and level. The connector utilizes a screw connection technology, requiring an operating tool for actuation. It accommodates solid and fine-stranded conductors ranging from 0.5 to 2.5mm2 (20 to 14 AWG), with a strip length of 5 to 7mm (0.2 to 0.28 inches) and a conductor connection direction to PCB at 0°. The pole number for connection 1 is 6, with a pin spacing of 5mm (0.197 inches), dimensions of 30mm in width, 11mm in height from the surface, and 9mm in depth. The solder pin length is 4.5mm with a diameter of 1mm. It features a plugging mechanism without loss of pin spacing, THT PCB contact, in-line solder pin arrangement, and one solder pin per potential. The connector is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring and Electrolytic Copper (ECu) with tin plating for contacts. It has a fire load of 0.096MJ and weighs 5.8g. Designed to operate within a temperature range of -60 to +105°C, it comes in boxes of 300 pieces, with a country of origin in Germany and a GTIN of 4066966223750. It complies with RoHS, including an exemption 6(c), and has multiple SCIP notification numbers for various EU countries.