233-148 WAGO Industrial Automation Components

WAGO 233-148 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1. It has a nominal voltage of 63V (III/3), 160V (III/2), and 320V (II/2) with a rated impulse voltage of 2.5kV for all categories. The rated current is 6A according to IEC/EN standards and 4A as per UL and CSA standards for Use Group B, with a rated voltage of 150V for both UL and CSA. This part features 48 connection points and the same number of potentials, with a single connection type and level. The connection technology used is CAGE CLAMP, requiring an operating tool for actuation. It accommodates solid and fine-stranded conductors ranging from 0.08 to 0.5mm2 (28 to 20 AWG), with specific notes for terminating 0.75mm2/18 AWG conductors. The strip length for connections is 5 to 6mm, and the conductor connection direction to PCB is 30 degrees. It has a pole number of 48, pin spacing of 2.5mm, and dimensions of 122.3mm in width, 15.7mm in height, 12.1mm in depth, with a height from the surface of 11.7mm. The solder pin length is 4mm, with dimensions of 0.5 x 0.75mm and a drilled hole diameter of 1.1 (+0.1)mm. The PCB contact is THT with an in-line solder pin arrangement and two solder pins per potential. The part is gray, made from Polyamide (PA66) with a flammability class of V0, and uses Chrome-Nickel spring steel for the clamping spring and Electrolytic Copper with tin plating for contacts. It weighs 16.1g, has a fire load of 0.196MJ, and operates within a temperature range of -60 to +105°C. Packaged in boxes of 40 pieces, it is RoHS compliant without exemptions, has a GTIN of 4045454050818, and a customs tariff number of 85369010000.