233-104 WAGO Industrial Automation Components

WAGO 233-104 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal voltages of 63V (III/3), 160V (III/2), and 320V (II/2), with a rated impulse voltage of 2.5kV for all categories and a rated surge voltage of 2.5kV for category II/2. The rated current is 6A according to IEC/EN standards, and 4A according to UL and CSA standards for Use Group B, with respective rated voltages of 150V for both UL and CSA. This connector has 4 connection points, supports a single connection type with one level, and utilizes CAGE CLAMP technology for connection, requiring an operating tool for actuation. It accommodates solid and fine-stranded conductors ranging from 0.08 to 0.5mm2 (28 to 20 AWG), with specific notes for terminating 0.75mm2/18 AWG conductors. The strip length for connection is 5 to 6mm, and the conductor connection direction to PCB is 30 degrees. It has a pole number of 4, pin spacing of 2.5mm, dimensions of 12.3mm in width, 15.7mm in height, 11.7mm height from the surface, and 12.1mm in depth, with a solder pin length of 4mm. The solder pins are arranged over the entire terminal strip (in-line), with two solder pins per potential. Made from Polyamide (PA66) in gray, it meets the UL94 V0 flammability class, with a chrome-nickel spring steel (CrNi) clamping spring, electrolytic copper (ECu) contacts, and tin plating. It has a fire load of 0.02MJ and weighs 1.5g. The connector operates within a temperature range of -60 to +105°C, is RoHS compliant without exemptions, and comes in boxes of 400 pieces with a country of origin of CH and a GTIN of 4045454049164.