233-107 WAGO Industrial Automation Components

WAGO 233-107 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal voltages of 63V (III/3), 160V (III/2), and 320V (II/2), with rated impulse voltages of 2.5kV for both III/3 and III/2 categories, and a rated surge voltage of 2.5kV for category II/2. The rated current is 6A according to IEC/EN standards, and it has overvoltage category III / Pollution degree 2. Under UL 1059 approvals, it has a rated voltage of 150V and a rated current of 4A for Use Group B, with similar ratings under CSA approvals. The part includes 7 connection points and potentials, with a single connection type and level utilizing CAGE CLAMP technology and an operating tool actuation type. It accommodates solid and fine-stranded conductors ranging from 0.08 to 0.5mm2 (28 to 20 AWG), with specific notes for terminating 0.75mm2/18 AWG conductors. The strip length for connections is 5 to 6mm, and the conductor connection direction to PCB is 30 degrees. It has a pole number of 7, pin spacing of 2.5mm, dimensions of 19.8mm in width, 15.7mm in height, 11.7mm height from the surface, and 12.1mm in depth, with a solder pin length of 4mm. The solder pins are arranged over the entire terminal strip in-line, with two solder pins per potential. The part is made from Polyamide (PA66) in gray, with a flammability class of V0, and uses Chrome-Nickel spring steel for the clamping spring and Electrolytic Copper with tin plating for contacts. It weighs 2.5g, has a fire load of 0.032MJ, and can operate within a temperature range of -60 to +105°C. Packaged in boxes of 240 pieces, it is RoHS compliant without exemptions, has a GTIN of 4045454049195, and a customs tariff number of 85369010000, with its country of origin being CH.