233-105 WAGO Industrial Automation Components

WAGO 233-105 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 63V, rated impulse voltage (III/3) of 2.5kV, rated voltage (III/2) of 160V, rated impulse voltage (III/2) of 2.5kV, nominal voltage (II/2) of 320V, rated surge voltage (II/2) of 2.5kV, and a rated current of 6A. It features UL 1059 approval with a rated voltage UL (Use Group B) of 150V and a rated current UL of 4A, alongside CSA approval with identical voltage and current ratings. The part has 5 connection points, a total of 5 potentials, 1 connection type, and 1 level, utilizing CAGE CLAMP technology for connection 1 with an operating tool actuation type. It supports solid and fine-stranded conductors ranging from 0.08 to 0.5mm2 (28 to 20 AWG), with specific notes for terminating 0.75mm2/18 AWG conductors. The strip length for connection 1 is 5 to 6mm (0.2 to 0.24 inches), and the conductor connection direction to PCB is 30 degrees. It has a pole number of 5, pin spacing of 2.5mm (0.098 inches), dimensions including a width of 14.8mm (0.583 inches), height of 15.7mm (0.618 inches), depth of 12.1mm (0.476 inches), and a height from the surface of 11.7mm (0.461 inches). The solder pin length is 4mm, with dimensions of 0.5 x 0.75mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. It features THT PCB contact, in-line solder pin arrangement, and two solder pins per potential. The part is gray, made from Polyamide (PA66) with a flammability class per UL94 of V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring, with electrolytic copper (ECu) contact material and tin plating. It has a fire load of 0.024MJ, weighs 1.8g, and operates within a temperature range of -60 to +105°C. It is RoHS compliant without exemption, packaged in boxes of 340 pieces, with a country of origin of CH, GTIN 4045454049171, and a customs tariff number of 85369010000.