TS 235-20ZH Schmersal Electronic Components

Switching frequency-

Switching principle-

Thermal test current-

Switching element-

Utilisation category AC-15-

Utilisation category DC-13-

Required rated short-circuit current to EN 60947-5-1100 A

Rated impulse withstand voltage Uimp0.8 kV

Ambient temperature, maximum+70 °C

Rated insulation voltage Ui32 VDC

Length of sensor22 mm

Ambient temperature, minimum-25 °C

Height of sensor25 mm

Degree of protectionIP65 to EN 60529, IP67 to EN...

Width of sensor106.3 mm

Note (Cable section)-

Cable section, maximum-

Cable section, minimum-

Terminal ConnectorConnector M12, 8-pole

Actuating speed, maximum-

Positive break force, minimum-

Note Bounce duration-

Actuating speed, minimum-

Actuating force, minimum-

Note (Switchover time)-

Gross weight80 g

Housing construction formBlock

StandardsIEC 60947-5-3

Enclosure materialPlastic, glass-fibre reinfor...

Actuator type to DIN EN 50047-

Actuating element-

Mechanical life, minimum-

Material of the contacts, electrical-

Number of auxiliary contacts-

Current, Utilisation category DC130.05 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119Low

Latching force-

Number of safety contacts-

Interfering radiationIEC 61000-6-4

EMC ratingIEC 60947-3

Current, Utilisation category DC120.05 A

Versionsp-type

Voltage drop Ud, maximum2 V

Current leakage Ir0.5 mA

Rated operating current (safety outputs)250 mA

Operating current600 mA

Rated operating voltage, minimum20.4 VDC

Voltage typeDC (direct current)

Rated operating voltage24 VDC −15 % / +10 %

No-load supply current I0100 mA

Protection ratingIII

Overvoltage categoryIII

Restistance to shock30 g / 11 ms

Material temperature resistance of the cable (in motion), minimum-10 °C

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Material temperature resistance (long-term), maximum+105 °C

Note (Repeat accuracy R)Axial offset: The long side ...

Number of fail-safe digital outputs2

Short-circuit recognitionYes

Diagnostic outputYes

Active arealateral

Voltage, Utilisation category DC1224 VDC

Switching frequency, approx.1 Hz

Output current, (fail-safe output), maximum0.25 A

Rated operating voltage, maximum26.4 VDC

Degree of pollution to VDE 01003

Material temperature resistance of the cable (at rest), minimum-30 °C

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ensured switch distance ON Sao10 mm

NoteThe cable section of the int...

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Hysteresis (Switch distance), maximum2 mm

Repeat accuracy R R0.5 mm

MountingA screw length of 25 mm is s...

Actuating panelslateral

Number of semi-conductor outputs with signaling function1

Number of LEDs3

CascadableYes

Integral System Diagnostics, statusYes

Duration of risk, maximum200 ms

Safety functionsYes

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Short circuit detectionYes

Sensor topologySensor for series wiring

Active principleRFID

Installation conditions (mechanical)not flush

general informationUniversal coding

Switching frequency5,000 /h

Switching principleSlow action with staggered c...

Thermal test current10 A

Switching elementNormally open contact (NO)

Utilisation category AC-154 A

Utilisation category DC-1324 VDC

Required rated short-circuit current to EN 60947-5-11,000 A

Rated impulse withstand voltage Uimp6 kV

Ambient temperature, maximum+80 °C

Rated insulation voltage Ui500 V

Length of sensor30 mm

Ambient temperature, minimum-30 °C

Height of sensor75.5 mm

Degree of protectionIP65 to EN 60529, IP67 to EN...

Width of sensor30 mm

Note (Cable section)All indications about the ca...

Cable section, maximum2.5 mm²

Cable section, minimum0.75 mm²

Terminal ConnectorScrew connection

Actuating speed, maximum1 m/s

Positive break force, minimum19 N

Note Bounce durationBounce duration in accordanc...

Actuating speed, minimum60 mm/min

Actuating force, minimum9 N

Note (Switchover time)Switchover time in accordanc...

Gross weight135 g

Housing construction formNorm construction design

StandardsBG-GS-ET-15, EN ISO 13849-1,...

Enclosure materialZinc die-cast, paint finish

Actuator type to DIN EN 50047B

Actuating elementPlunger

Mechanical life, minimum20,000,000 Operations

Material of the contacts, electricalSilver

Number of auxiliary contacts2

Current, Utilisation category DC13-

Voltage, Utilisation category DC13-

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119-

Latching force-

Number of safety contacts-

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Switching frequency-

Switching principleCreep circuit element

Thermal test current10 A

Switching elementNO contact, NC contact

Utilisation category AC-15-

Utilisation category DC-13-

Required rated short-circuit current to EN 60947-5-1-

Rated impulse withstand voltage Uimp6 kV

Ambient temperature, maximum+80 °C

Rated insulation voltage Ui500 V

Length of sensor30 mm

Ambient temperature, minimum-30 °C

Height of sensor90 mm

Degree of protectionIP67 to EN 60529

Width of sensor52 mm

Note (Cable section)-

Cable section, maximum2.5 mm²

Cable section, minimum0.25 mm²

Terminal ConnectorScrew connection

Actuating speed, maximum2 m/s

Positive break force, minimum10 N

Note Bounce duration-

Actuating speed, minimum-

Actuating force, minimum-

Note (Switchover time)-

Gross weight115 g

Housing construction form-

Standards-

Enclosure materialPlastic, glass-fibre reinfor...

Actuator type to DIN EN 50047-

Actuating element-

Mechanical life, minimum1,000,000 Operations

Material of the contacts, electricalSilver

Number of auxiliary contacts1

Current, Utilisation category DC134 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-154 A

Voltage, Utilisation category AC15230 VAC

Cable entry3 x M20 x 1,5

positive break travel8 mm

Number of cable glands3

Coding level according to ISO 14119Low

Latching force30 N

Number of safety contacts2

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Switching frequency-

Switching principle-

Thermal test current-

Switching element-

Utilisation category AC-15-

Utilisation category DC-13-

Required rated short-circuit current to EN 60947-5-1100 A

Rated impulse withstand voltage Uimp0.8 kV

Ambient temperature, maximum+70 °C

Rated insulation voltage Ui32 VDC

Length of sensor22 mm

Ambient temperature, minimum-25 °C

Height of sensor25 mm

Degree of protectionIP65 to EN 60529, IP67 to EN...

Width of sensor106.3 mm

Note (Cable section)-

Cable section, maximum-

Cable section, minimum-

Terminal ConnectorConnector M12, 8-pole

Actuating speed, maximum-

Positive break force, minimum-

Note Bounce duration-

Actuating speed, minimum-

Actuating force, minimum-

Note (Switchover time)-

Gross weight80 g

Housing construction formBlock

StandardsIEC 60947-5-3

Enclosure materialPlastic, glass-fibre reinfor...

Actuator type to DIN EN 50047-

Actuating element-

Mechanical life, minimum-

Material of the contacts, electrical-

Number of auxiliary contacts-

Current, Utilisation category DC130.05 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119Low

Latching force-

Number of safety contacts-

Interfering radiationIEC 61000-6-4

EMC ratingIEC 60947-3

Current, Utilisation category DC120.05 A

Versionsp-type

Voltage drop Ud, maximum2 V

Current leakage Ir0.5 mA

Rated operating current (safety outputs)250 mA

Operating current600 mA

Rated operating voltage, minimum20.4 VDC

Voltage typeDC (direct current)

Rated operating voltage24 VDC −15 % / +10 %

No-load supply current I0100 mA

Protection ratingIII

Overvoltage categoryIII

Restistance to shock30 g / 11 ms

Material temperature resistance of the cable (in motion), minimum-10 °C

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Material temperature resistance (long-term), maximum+105 °C

Note (Repeat accuracy R)Axial offset: The long side ...

Number of fail-safe digital outputs2

Short-circuit recognitionYes

Diagnostic outputYes

Active arealateral

Voltage, Utilisation category DC1224 VDC

Switching frequency, approx.1 Hz

Output current, (fail-safe output), maximum0.25 A

Rated operating voltage, maximum26.4 VDC

Degree of pollution to VDE 01003

Material temperature resistance of the cable (at rest), minimum-30 °C

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ensured switch distance ON Sao10 mm

NoteThe cable section of the int...

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Hysteresis (Switch distance), maximum2 mm

Repeat accuracy R R0.5 mm

MountingA screw length of 25 mm is s...

Actuating panelslateral

Number of semi-conductor outputs with signaling function1

Number of LEDs3

CascadableYes

Integral System Diagnostics, statusYes

Duration of risk, maximum200 ms

Safety functionsYes

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Short circuit detectionYes

Sensor topologySensor for series wiring

Active principleRFID

Installation conditions (mechanical)not flush

general informationUniversal coding

Switching frequency5,000 /h

Switching principleSlow action with staggered c...

Thermal test current10 A

Switching elementNormally open contact (NO)

Utilisation category AC-154 A

Utilisation category DC-1324 VDC

Required rated short-circuit current to EN 60947-5-11,000 A

Rated impulse withstand voltage Uimp6 kV

Ambient temperature, maximum+80 °C

Rated insulation voltage Ui500 V

Length of sensor30 mm

Ambient temperature, minimum-30 °C

Height of sensor75.5 mm

Degree of protectionIP65 to EN 60529, IP67 to EN...

Width of sensor30 mm

Note (Cable section)All indications about the ca...

Cable section, maximum2.5 mm²

Cable section, minimum0.75 mm²

Terminal ConnectorScrew connection

Actuating speed, maximum1 m/s

Positive break force, minimum19 N

Note Bounce durationBounce duration in accordanc...

Actuating speed, minimum60 mm/min

Actuating force, minimum9 N

Note (Switchover time)Switchover time in accordanc...

Gross weight135 g

Housing construction formNorm construction design

StandardsBG-GS-ET-15, EN ISO 13849-1,...

Enclosure materialZinc die-cast, paint finish

Actuator type to DIN EN 50047B

Actuating elementPlunger

Mechanical life, minimum20,000,000 Operations

Material of the contacts, electricalSilver

Number of auxiliary contacts2

Current, Utilisation category DC13-

Voltage, Utilisation category DC13-

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119-

Latching force-

Number of safety contacts-

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-