TESFA/180 Schmersal Safety Switches

Switching element-

Utilisation category DC-13-

Switching principle-

Switching frequency-

Thermal test current-

Utilisation category AC-15-

Degree of protectionIP65 to EN 60529, IP67 to EN...

Rated insulation voltage Ui32 VDC

Ambient temperature, minimum-25 °C

Rated impulse withstand voltage Uimp0.8 kV

Height of sensor25 mm

Ambient temperature, maximum+70 °C

Length of sensor22 mm

Cable section, maximum-

Cable section, minimum-

Width of sensor106.3 mm

Note (Cable section)-

Enclosure materialPlastic, glass-fibre reinfor...

Material of the contacts, electrical-

Positive break angle-

Terminal ConnectorConnector M12, 8-pole

Opening angle-

Mechanical life, minimum-

Number of auxiliary contacts-

Colour of the housing-

StandardsIEC 60947-5-3

Gross weight80 g

Number of safety contacts-

Alignment aid-

Mounting inside-

Additional hinge-

Current, Utilisation category DC130.05 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119Low

Latching force-

Interfering radiationIEC 61000-6-4

EMC ratingIEC 60947-3

Current, Utilisation category DC120.05 A

Versionsp-type

Voltage drop Ud, maximum2 V

Current leakage Ir0.5 mA

Rated operating current (safety outputs)250 mA

Operating current600 mA

Required rated short-circuit current to EN 60947-5-1100 A

Rated operating voltage, minimum20.4 VDC

Voltage typeDC (direct current)

Rated operating voltage24 VDC −15 % / +10 %

No-load supply current I0100 mA

Protection ratingIII

Overvoltage categoryIII

Restistance to shock30 g / 11 ms

Material temperature resistance of the cable (in motion), minimum-10 °C

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Material temperature resistance (long-term), maximum+105 °C

Note (Repeat accuracy R)Axial offset: The long side ...

Number of fail-safe digital outputs2

Short-circuit recognitionYes

Diagnostic outputYes

Active arealateral

Voltage, Utilisation category DC1224 VDC

Switching frequency, approx.1 Hz

Output current, (fail-safe output), maximum0.25 A

Rated operating voltage, maximum26.4 VDC

Degree of pollution to VDE 01003

Material temperature resistance of the cable (at rest), minimum-30 °C

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ensured switch distance ON Sao10 mm

NoteThe cable section of the int...

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Hysteresis (Switch distance), maximum2 mm

Repeat accuracy R R0.5 mm

MountingA screw length of 25 mm is s...

Actuating panelslateral

Number of semi-conductor outputs with signaling function1

Number of LEDs3

CascadableYes

Integral System Diagnostics, statusYes

Duration of risk, maximum200 ms

Safety functionsYes

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Short circuit detectionYes

Sensor topologySensor for series wiring

Active principleRFID

Installation conditions (mechanical)not flush

general informationUniversal coding

Housing construction formBlock

Switching elementNO contact, NC contact

Utilisation category DC-131 A

Switching principleCreep circuit element

Switching frequency1,200 /h

Thermal test current2.5 A

Utilisation category AC-152 A

Degree of protectionIP65

Rated insulation voltage Ui250 V

Ambient temperature, minimum-25 °C

Rated impulse withstand voltage Uimp2.5 kV

Height of sensor115 mm

Ambient temperature, maximum+65 °C

Length of sensor21.5 mm

Cable section, maximum1 mm²

Cable section, minimum0.5 mm²

Width of sensor141 mm

Note (Cable section)All indications about the ca...

Enclosure materialZinc die-cast

Material of the contacts, electricalSilver-nickel alloy 10

Positive break angle14 °

Terminal ConnectorScrew connection

Opening angle180°

Mechanical life, minimum1,000,000 Operations

Number of auxiliary contacts2

Colour of the housingBlack

StandardsEN 60947-5-1, BG-GS-ET-15

Gross weight840 g

Number of safety contacts2

Alignment aidYes

Mounting insideYes

Additional hingeYes

Current, Utilisation category DC13-

Voltage, Utilisation category DC13-

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119-

Latching force-

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Required rated short-circuit current to EN 60947-5-1-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Housing construction form-

Switching elementNO contact, NC contact

Utilisation category DC-13-

Switching principleCreep circuit element

Switching frequency-

Thermal test current10 A

Utilisation category AC-15-

Degree of protectionIP67 to EN 60529

Rated insulation voltage Ui500 V

Ambient temperature, minimum-30 °C

Rated impulse withstand voltage Uimp6 kV

Height of sensor90 mm

Ambient temperature, maximum+80 °C

Length of sensor30 mm

Cable section, maximum2.5 mm²

Cable section, minimum0.25 mm²

Width of sensor52 mm

Note (Cable section)-

Enclosure materialPlastic, glass-fibre reinfor...

Material of the contacts, electricalSilver

Positive break angle-

Terminal ConnectorScrew connection

Opening angle-

Mechanical life, minimum1,000,000 Operations

Number of auxiliary contacts1

Colour of the housing-

Standards-

Gross weight115 g

Number of safety contacts2

Alignment aid-

Mounting inside-

Additional hinge-

Current, Utilisation category DC134 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-154 A

Voltage, Utilisation category AC15230 VAC

Cable entry3 x M20 x 1,5

Actuating speed, maximum2 m/s

Positive break force, minimum10 N

positive break travel8 mm

Number of cable glands3

Coding level according to ISO 14119Low

Latching force30 N

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Required rated short-circuit current to EN 60947-5-1-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Housing construction form-

Switching element-

Utilisation category DC-13-

Switching principle-

Switching frequency-

Thermal test current-

Utilisation category AC-15-

Degree of protectionIP65 to EN 60529, IP67 to EN...

Rated insulation voltage Ui32 VDC

Ambient temperature, minimum-25 °C

Rated impulse withstand voltage Uimp0.8 kV

Height of sensor25 mm

Ambient temperature, maximum+70 °C

Length of sensor22 mm

Cable section, maximum-

Cable section, minimum-

Width of sensor106.3 mm

Note (Cable section)-

Enclosure materialPlastic, glass-fibre reinfor...

Material of the contacts, electrical-

Positive break angle-

Terminal ConnectorConnector M12, 8-pole

Opening angle-

Mechanical life, minimum-

Number of auxiliary contacts-

Colour of the housing-

StandardsIEC 60947-5-3

Gross weight80 g

Number of safety contacts-

Alignment aid-

Mounting inside-

Additional hinge-

Current, Utilisation category DC130.05 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119Low

Latching force-

Interfering radiationIEC 61000-6-4

EMC ratingIEC 60947-3

Current, Utilisation category DC120.05 A

Versionsp-type

Voltage drop Ud, maximum2 V

Current leakage Ir0.5 mA

Rated operating current (safety outputs)250 mA

Operating current600 mA

Required rated short-circuit current to EN 60947-5-1100 A

Rated operating voltage, minimum20.4 VDC

Voltage typeDC (direct current)

Rated operating voltage24 VDC −15 % / +10 %

No-load supply current I0100 mA

Protection ratingIII

Overvoltage categoryIII

Restistance to shock30 g / 11 ms

Material temperature resistance of the cable (in motion), minimum-10 °C

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Material temperature resistance (long-term), maximum+105 °C

Note (Repeat accuracy R)Axial offset: The long side ...

Number of fail-safe digital outputs2

Short-circuit recognitionYes

Diagnostic outputYes

Active arealateral

Voltage, Utilisation category DC1224 VDC

Switching frequency, approx.1 Hz

Output current, (fail-safe output), maximum0.25 A

Rated operating voltage, maximum26.4 VDC

Degree of pollution to VDE 01003

Material temperature resistance of the cable (at rest), minimum-30 °C

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ensured switch distance ON Sao10 mm

NoteThe cable section of the int...

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Hysteresis (Switch distance), maximum2 mm

Repeat accuracy R R0.5 mm

MountingA screw length of 25 mm is s...

Actuating panelslateral

Number of semi-conductor outputs with signaling function1

Number of LEDs3

CascadableYes

Integral System Diagnostics, statusYes

Duration of risk, maximum200 ms

Safety functionsYes

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Short circuit detectionYes

Sensor topologySensor for series wiring

Active principleRFID

Installation conditions (mechanical)not flush

general informationUniversal coding

Housing construction formBlock

Switching elementNO contact, NC contact

Utilisation category DC-131 A

Switching principleCreep circuit element

Switching frequency1,200 /h

Thermal test current2.5 A

Utilisation category AC-152 A

Degree of protectionIP65

Rated insulation voltage Ui250 V

Ambient temperature, minimum-25 °C

Rated impulse withstand voltage Uimp2.5 kV

Height of sensor115 mm

Ambient temperature, maximum+65 °C

Length of sensor21.5 mm

Cable section, maximum1 mm²

Cable section, minimum0.5 mm²

Width of sensor141 mm

Note (Cable section)All indications about the ca...

Enclosure materialZinc die-cast

Material of the contacts, electricalSilver-nickel alloy 10

Positive break angle14 °

Terminal ConnectorScrew connection

Opening angle180°

Mechanical life, minimum1,000,000 Operations

Number of auxiliary contacts2

Colour of the housingBlack

StandardsEN 60947-5-1, BG-GS-ET-15

Gross weight840 g

Number of safety contacts2

Alignment aidYes

Mounting insideYes

Additional hingeYes

Current, Utilisation category DC13-

Voltage, Utilisation category DC13-

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable entry-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119-

Latching force-

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Required rated short-circuit current to EN 60947-5-1-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Housing construction form-