TESF/ST24.1/180 Schmersal Safety Switches

Switching principle-

Switching frequency-

Switching element-

Ambient temperature, minimum-25 °C

Rated insulation voltage Ui32 VDC

Utilisation category DC-13-

Thermal test current-

Utilisation category AC-15-

Rated impulse withstand voltage Uimp0.8 kV

Degree of protectionIP65 to EN 60529, IP67 to EN...

Ambient temperature, maximum+70 °C

Opening angle-

Length of sensor22 mm

Height of sensor25 mm

Positive break angle-

Width of sensor106.3 mm

Terminal ConnectorConnector M12, 8-pole

Mechanical life, minimum-

StandardsIEC 60947-5-3

Gross weight80 g

Number of auxiliary contacts-

Material of the contacts, electrical-

Enclosure materialPlastic, glass-fibre reinfor...

Number of safety contacts-

Additional hinge-

Mounting inside-

Colour of the housing-

Current, Utilisation category DC130.05 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable section, maximum-

Cable entry-

Cable section, minimum-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119Low

Latching force-

Interfering radiationIEC 61000-6-4

EMC ratingIEC 60947-3

Current, Utilisation category DC120.05 A

Versionsp-type

Voltage drop Ud, maximum2 V

Current leakage Ir0.5 mA

Rated operating current (safety outputs)250 mA

Operating current600 mA

Required rated short-circuit current to EN 60947-5-1100 A

Rated operating voltage, minimum20.4 VDC

Voltage typeDC (direct current)

Rated operating voltage24 VDC −15 % / +10 %

No-load supply current I0100 mA

Protection ratingIII

Overvoltage categoryIII

Restistance to shock30 g / 11 ms

Material temperature resistance of the cable (in motion), minimum-10 °C

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Material temperature resistance (long-term), maximum+105 °C

Note (Repeat accuracy R)Axial offset: The long side ...

Number of fail-safe digital outputs2

Short-circuit recognitionYes

Diagnostic outputYes

Active arealateral

Voltage, Utilisation category DC1224 VDC

Switching frequency, approx.1 Hz

Output current, (fail-safe output), maximum0.25 A

Rated operating voltage, maximum26.4 VDC

Degree of pollution to VDE 01003

Material temperature resistance of the cable (at rest), minimum-30 °C

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ensured switch distance ON Sao10 mm

NoteThe cable section of the int...

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Hysteresis (Switch distance), maximum2 mm

Repeat accuracy R R0.5 mm

MountingA screw length of 25 mm is s...

Actuating panelslateral

Number of semi-conductor outputs with signaling function1

Number of LEDs3

CascadableYes

Integral System Diagnostics, statusYes

Duration of risk, maximum200 ms

Safety functionsYes

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Short circuit detectionYes

Sensor topologySensor for series wiring

Active principleRFID

Installation conditions (mechanical)not flush

general informationUniversal coding

Housing construction formBlock

Switching principleCreep circuit element

Switching frequency1,200 /h

Switching elementNO contact, NC contact

Ambient temperature, minimum-25 °C

Rated insulation voltage Ui250 V

Utilisation category DC-131 A

Thermal test current2.5 A

Utilisation category AC-152 A

Rated impulse withstand voltage Uimp0.8 kV

Degree of protectionIP65

Ambient temperature, maximum+65 °C

Opening angle180°

Length of sensor21.5 mm

Height of sensor115 mm

Positive break angle14 °

Width of sensor141 mm

Terminal ConnectorPlug-in connection, bottom

Mechanical life, minimum1,000,000 Operations

StandardsEN 60947-5-1, BG-GS-ET-15

Gross weight840 g

Number of auxiliary contacts2

Material of the contacts, electricalSilver-nickel alloy 10

Enclosure materialZinc die-cast

Number of safety contacts2

Additional hingeYes

Mounting insideYes

Colour of the housingBlack

Current, Utilisation category DC13-

Voltage, Utilisation category DC13-

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable section, maximum-

Cable entry-

Cable section, minimum-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119-

Latching force-

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Required rated short-circuit current to EN 60947-5-1-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Housing construction form-

Switching principleCreep circuit element

Switching frequency-

Switching elementNO contact, NC contact

Ambient temperature, minimum-30 °C

Rated insulation voltage Ui500 V

Utilisation category DC-13-

Thermal test current10 A

Utilisation category AC-15-

Rated impulse withstand voltage Uimp6 kV

Degree of protectionIP67 to EN 60529

Ambient temperature, maximum+80 °C

Opening angle-

Length of sensor30 mm

Height of sensor90 mm

Positive break angle-

Width of sensor52 mm

Terminal ConnectorScrew connection

Mechanical life, minimum1,000,000 Operations

Standards-

Gross weight115 g

Number of auxiliary contacts1

Material of the contacts, electricalSilver

Enclosure materialPlastic, glass-fibre reinfor...

Number of safety contacts2

Additional hinge-

Mounting inside-

Colour of the housing-

Current, Utilisation category DC134 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-154 A

Voltage, Utilisation category AC15230 VAC

Cable section, maximum2.5 mm²

Cable entry3 x M20 x 1,5

Cable section, minimum0.25 mm²

Actuating speed, maximum2 m/s

Positive break force, minimum10 N

positive break travel8 mm

Number of cable glands3

Coding level according to ISO 14119Low

Latching force30 N

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Required rated short-circuit current to EN 60947-5-1-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Housing construction form-

Switching principle-

Switching frequency-

Switching element-

Ambient temperature, minimum-25 °C

Rated insulation voltage Ui32 VDC

Utilisation category DC-13-

Thermal test current-

Utilisation category AC-15-

Rated impulse withstand voltage Uimp0.8 kV

Degree of protectionIP65 to EN 60529, IP67 to EN...

Ambient temperature, maximum+70 °C

Opening angle-

Length of sensor22 mm

Height of sensor25 mm

Positive break angle-

Width of sensor106.3 mm

Terminal ConnectorConnector M12, 8-pole

Mechanical life, minimum-

StandardsIEC 60947-5-3

Gross weight80 g

Number of auxiliary contacts-

Material of the contacts, electrical-

Enclosure materialPlastic, glass-fibre reinfor...

Number of safety contacts-

Additional hinge-

Mounting inside-

Colour of the housing-

Current, Utilisation category DC130.05 A

Voltage, Utilisation category DC1324 VDC

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable section, maximum-

Cable entry-

Cable section, minimum-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119Low

Latching force-

Interfering radiationIEC 61000-6-4

EMC ratingIEC 60947-3

Current, Utilisation category DC120.05 A

Versionsp-type

Voltage drop Ud, maximum2 V

Current leakage Ir0.5 mA

Rated operating current (safety outputs)250 mA

Operating current600 mA

Required rated short-circuit current to EN 60947-5-1100 A

Rated operating voltage, minimum20.4 VDC

Voltage typeDC (direct current)

Rated operating voltage24 VDC −15 % / +10 %

No-load supply current I0100 mA

Protection ratingIII

Overvoltage categoryIII

Restistance to shock30 g / 11 ms

Material temperature resistance of the cable (in motion), minimum-10 °C

Resistance to vibrations to EN 60068-2-610 … 55 Hz, amplitude 1 mm

Material temperature resistance (long-term), maximum+105 °C

Note (Repeat accuracy R)Axial offset: The long side ...

Number of fail-safe digital outputs2

Short-circuit recognitionYes

Diagnostic outputYes

Active arealateral

Voltage, Utilisation category DC1224 VDC

Switching frequency, approx.1 Hz

Output current, (fail-safe output), maximum0.25 A

Rated operating voltage, maximum26.4 VDC

Degree of pollution to VDE 01003

Material temperature resistance of the cable (at rest), minimum-30 °C

Storage and transport temperature, maximum+85 °C

Storage and transport temperature, minimum-25 °C

Ensured switch distance ON Sao10 mm

NoteThe cable section of the int...

Ensured switch distance OFF Sar20 mm

Switch distance12 mm

Hysteresis (Switch distance), maximum2 mm

Repeat accuracy R R0.5 mm

MountingA screw length of 25 mm is s...

Actuating panelslateral

Number of semi-conductor outputs with signaling function1

Number of LEDs3

CascadableYes

Integral System Diagnostics, statusYes

Duration of risk, maximum200 ms

Safety functionsYes

Time to readiness, maximum2,000 ms

Reaction time, maximum100 ms

Short circuit detectionYes

Sensor topologySensor for series wiring

Active principleRFID

Installation conditions (mechanical)not flush

general informationUniversal coding

Housing construction formBlock

Switching principleCreep circuit element

Switching frequency1,200 /h

Switching elementNO contact, NC contact

Ambient temperature, minimum-25 °C

Rated insulation voltage Ui250 V

Utilisation category DC-131 A

Thermal test current2.5 A

Utilisation category AC-152 A

Rated impulse withstand voltage Uimp0.8 kV

Degree of protectionIP65

Ambient temperature, maximum+65 °C

Opening angle180°

Length of sensor21.5 mm

Height of sensor115 mm

Positive break angle14 °

Width of sensor141 mm

Terminal ConnectorPlug-in connection, bottom

Mechanical life, minimum1,000,000 Operations

StandardsEN 60947-5-1, BG-GS-ET-15

Gross weight840 g

Number of auxiliary contacts2

Material of the contacts, electricalSilver-nickel alloy 10

Enclosure materialZinc die-cast

Number of safety contacts2

Additional hingeYes

Mounting insideYes

Colour of the housingBlack

Current, Utilisation category DC13-

Voltage, Utilisation category DC13-

Current, Utilisation category AC-15-

Voltage, Utilisation category AC15-

Cable section, maximum-

Cable entry-

Cable section, minimum-

Actuating speed, maximum-

Positive break force, minimum-

positive break travel-

Number of cable glands-

Coding level according to ISO 14119-

Latching force-

Interfering radiation-

EMC rating-

Current, Utilisation category DC12-

Versions-

Voltage drop Ud, maximum-

Current leakage Ir-

Rated operating current (safety outputs)-

Operating current-

Required rated short-circuit current to EN 60947-5-1-

Rated operating voltage, minimum-

Voltage type-

Rated operating voltage-

No-load supply current I0-

Protection rating-

Overvoltage category-

Restistance to shock-

Material temperature resistance of the cable (in motion), minimum-

Resistance to vibrations to EN 60068-2-6-

Material temperature resistance (long-term), maximum-

Note (Repeat accuracy R)-

Number of fail-safe digital outputs-

Short-circuit recognition-

Diagnostic output-

Active area-

Voltage, Utilisation category DC12-

Switching frequency, approx.-

Output current, (fail-safe output), maximum-

Rated operating voltage, maximum-

Degree of pollution to VDE 0100-

Material temperature resistance of the cable (at rest), minimum-

Storage and transport temperature, maximum-

Storage and transport temperature, minimum-

Ensured switch distance ON Sao-

Note-

Ensured switch distance OFF Sar-

Switch distance-

Hysteresis (Switch distance), maximum-

Repeat accuracy R R-

Mounting-

Actuating panels-

Number of semi-conductor outputs with signaling function-

Number of LEDs-

Cascadable-

Integral System Diagnostics, status-

Duration of risk, maximum-

Safety functions-

Time to readiness, maximum-

Reaction time, maximum-

Short circuit detection-

Sensor topology-

Active principle-

Installation conditions (mechanical)-

general information-

Housing construction form-