RSS 36-I1-SD-R-ST Schmersal Electronic Components

Product Details

• EMC rating
  IEC 60947-3
• Interfering radiation
  IEC 61000-6-4
• Current, Utilisation category DC13
  0.25 A
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC12
  0.25 A
• Current leakage Ir
  0.5 mA
• Voltage drop Ud, maximum
  2 V
• Voltage, Utilisation category DC12
  24 VDC
• Versions
  p-type
• Output current, (fail-safe output), maximum
  0.25 A
• Rated operating current (safety outputs)
  250 mA
• Switching frequency, approx.
  1 Hz
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Operating current
  150 mA
• Rated operating voltage, minimum
  20.4 VDC
• No-load supply current I0
  100 mA
• Overvoltage category
  III
• Rated impulse withstand voltage Uimp
  0.8 kV
• Degree of pollution to VDE 0100
  3
• Voltage type
  DC (direct current)
Rated operating voltage, maximum
26.4 VDC
Rated insulation voltage Ui
32 VDC
Rated operating voltage
24 VDC −15 % / +10 %
Protection rating
III
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Storage and transport temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
Material temperature resistance (long-term), maximum
+105 °C
Material temperature resistance of the cable (in motion), minimum
-10 °C
Material temperature resistance of the cable (at rest), minimum
-30 °C
Storage and transport temperature, maximum
+85 °C
Ambient temperature, maximum
+70 °C
Ambient temperature, minimum
-25 °C
Width of sensor
106.3 mm
Degree of protection
IP65 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Height of sensor
25 mm
Note
The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current
Length of sensor
22 mm
Terminal Connector
Connector M12, 8-pole
Ensured switch distance OFF Sar
20 mm
Ensured switch distance ON Sao
10 mm
Repeat accuracy R R
0.5 mm
Switch distance
12 mm
Mounting
A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.
Latching force
18 N
Hysteresis (Switch distance), maximum
2 mm
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
Actuating panels
lateral
Number of Series-wiring of sensors
31
Number of fail-safe digital outputs
2
Number of semi-conductor outputs with signaling function
1
Safety functions
Yes
Cascadable
Yes
Short circuit detection
Yes
Time to readiness, maximum
2,000 ms
Diagnostic output
Yes
Latching
Yes
Short-circuit recognition
Yes
Number of LEDs
3
Integral System Diagnostics, status
Yes
Serial diagnostics
Yes
Gross weight
250 g
Reaction time, maximum
100 ms
Duration of risk, maximum
200 ms
Coding level according to ISO 14119
High
Active principle
RFID
Housing construction form
Block
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
general information
Individual coding
Sensor topology
Sensor for series wiring
Installation conditions (mechanical)
not flush
Active area
lateral
Standards
IEC 60947-5-3

Related documents RSS 36-I1-SD-R-ST Specs