RSS 36-D-R-ST Schmersal Electronic Components

Product Details

• EMC rating
  IEC 60947-3
• Interfering radiation
  IEC 61000-6-4
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC13
  0.05 A
• Voltage drop Ud, maximum
  2 V
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Switching frequency, approx.
  1 Hz
• Degree of pollution to VDE 0100
  3
• Rated operating voltage
  24 VDC −15 % / +10 %
• Rated impulse withstand voltage Uimp
  0.8 kV
• Material temperature resistance of the cable (at rest), minimum
  -30 °C
• Restistance to shock
  30 g / 11 ms
• Rated insulation voltage Ui
  32 VDC
• Ambient temperature, maximum
  +70 °C
• Degree of protection
  IP65 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
• Current leakage Ir
  0.5 mA
• Current, Utilisation category DC12
  0.05 A
• Voltage, Utilisation category DC12
  24 VDC
• Versions
  p-type
• Output current, (fail-safe output), maximum
  0.25 A
Rated operating current (safety outputs)
250 mA
Operating current
600 mA
Rated operating voltage, maximum
26.4 VDC
No-load supply current I0
100 mA
Rated operating voltage, minimum
20.4 VDC
Voltage type
DC (direct current)
Overvoltage category
III
Protection rating
III
Material temperature resistance (long-term), maximum
+105 °C
Storage and transport temperature, maximum
+85 °C
Material temperature resistance of the cable (in motion), minimum
-10 °C
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Height of sensor
25 mm
Storage and transport temperature, minimum
-25 °C
Ambient temperature, minimum
-25 °C
Length of sensor
22 mm
Width of sensor
106.3 mm
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum 100 mm cl
Terminal Connector
Connector M12, 8-pole
Note
The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current
Ensured switch distance OFF Sar
20 mm
Ensured switch distance ON Sao
10 mm
Switch distance
12 mm
Hysteresis (Switch distance), maximum
2 mm
Latching force
18 N
Repeat accuracy R R
0.5 mm
Actuating panels
lateral
Number of fail-safe digital outputs
2
Number of semi-conductor outputs with signaling function
1
Mounting
A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.
Number of LEDs
3
Cascadable
Yes
Integral System Diagnostics, status
Yes
Safety functions
Yes
Short-circuit recognition
Yes
Latching
Yes
Duration of risk, maximum
200 ms
Short circuit detection
Yes
Reaction time, maximum
100 ms
Diagnostic output
Yes
Time to readiness, maximum
2,000 ms
Gross weight
100 g
Active area
lateral
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Active principle
RFID
Standards
IEC 60947-5-3
Sensor topology
Sensor for series wiring
Housing construction form
Block
general information
Universal coding
Coding level according to ISO 14119
Low
Installation conditions (mechanical)
not flush

Related documents RSS 36-D-R-ST Specs