MV10H 330-11Y-M20 Schmersal Electronic Components

Product Details

• Switching principle
  Snap switch element
• Switchover time, maximum
  10 ms
• Bounce duration, maximum
  43,221 ms
• Note (Switching element)
  galvanically separated contact bridges
• Switching element
  NO contact, NC contact
• Utilisation category AC-15
  2.5 A
• Rated impulse withstand voltage Uimp
  4 kV
• Ambient temperature, minimum
  -30 °C
• Thermal test current
  6 A
• Rated insulation voltage Ui
  250 V
• Ambient temperature, maximum
  +90 °C
• Diameter of the Rod
  6 mm
• Restistance to shock
  50 g / 6 ms
• Degree of protection
  IP65 to EN 60529
• Length of sensor
  40 mm
• Height of sensor
  276 mm
• Cable section, minimum
  1.5 mm²
• Wire cross-section
  13 AWG
• Width of sensor
  40 mm
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
Cable section, maximum
2.5 mm²
Terminal Connector
Screw connection
Actuating torque
0.5 Nm
Repeat accuracy of switching points
0.02
Material of the rod
Epoxy resin
Number of shutters
1
Actuating speed, minimum
1 mm/min
Material of the contacts, electrical
Silver
Enclosure material
Light-alloy diecast, paint finish
Contact opening
2 x 0.5 mm
Active principle
mechanical
Mechanical life, minimum
30,000,000 Operations
Gross weight
315 g
Actuating element
Rod lever
Standards
EN 60947-5-1
Number of openers
1
Enclosure coating material
painted

MV10H 330-11Y-M20 Related Documents