M2S 441-11Y Schmersal Electronic Components

Product Details

• Switchover time, maximum
  35 ms
• Switching principle
  Snap switch element
• Switching element
  NO contact, NC contact
• Bounce duration, maximum
  5 ms
• Note (Switching element)
  galvanically separated contact bridges
• Utilisation category AC-15
  250 VAC
• Rated insulation voltage Ui
  250 V
• Rated impulse withstand voltage Uimp
  4 kV
• Thermal test current
  16 A
• Ambient temperature, maximum
  +90 °C
• Ambient temperature, minimum
  -30 °C
• Degree of protection
  IP65 to EN 60529
• Diameter of the Plunger
  10 mm
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Length of sensor
  63 mm
• Height of sensor
  161 mm
• Wire cross-section
  13 AWG
• Width of sensor
  106 mm
• Cable section, maximum
  2.5 mm²
• Cable section, minimum
  1.5 mm²
Terminal Connector
Screw connection
Note (Actuating speed)
Actuating speed with vertical actuating angle to switch axis
Contact opening
2 x 2.5 mm
Actuating speed, maximum
1 m/s
Actuating angle
20 °
Mechanical life, minimum
5,000,000 Operations
Actuating element
Plunger
Actuating speed, minimum
1 mm/min
Slide form
Sphere
Material of the contacts, electrical
Silver
Gross weight
1,310 g
Number of openers
1
Enclosure coating material
painted
Enclosure material
Grey cast iron, galvanised
Standards
EN 60947-5-1
Active principle
mechanical
Number of shutters
1

M2S 441-11Y Related Documents