M2C 441-11Y Schmersal Electronic Components

Product Details

• Switching principle
  Snap switch element
• Rated impulse withstand voltage Uimp
  4 kV
• Note (Switching element)
  galvanically separated contact bridges
• Switchover time, maximum
  35 ms
• Switching element
  NO contact, NC contact
• Utilisation category AC-15
  4 A
• Bounce duration, maximum
  5 ms
• Thermal test current
  16 A
• Rated insulation voltage Ui
  250 V
• Degree of protection
  IP65 to EN 60529
• Ambient temperature, minimum
  -30 °C
• Ambient temperature, maximum
  +90 °C
• Width of sensor
  106 mm
• Height of sensor
  194 mm
• Length of sensor
  63 mm
• Wire cross-section
  13 AWG
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Actuating speed, maximum
  0.5 m/s
• Note (Actuating speed)
  Actuating speed with vertical actuating angle to switch axis
• Cable section, maximum
  2.5 mm²
Actuating element
Fork lever
Cable section, minimum
1.5 mm²
Terminal Connector
Screw connection
Number of shutters
1
Number of openers
1
Actuating speed, minimum
1 mm/min
Standards
EN 60947-5-1
Active principle
mechanical
Mechanical life, minimum
5,000,000 Operations
Material of the contacts, electrical
Silver
Contact opening
2 x 2.5 mm
Enclosure coating material
painted
Enclosure material
Grey cast iron, galvanised
Gross weight
1,360 g

M2C 441-11Y Related Documents