M2A 471-12/12Y Schmersal Electronic Components

Product Details

• Rated impulse withstand voltage Uimp
  6 kV
• Switching frequency
  1,000 /h
• Switching principle
  Snap switch element
• Note (Switching element)
  galvanically separated contact bridges
• Switching element
  NO contact / NC contact
• Utilisation category AC-15
  10 A
• Thermal test current
  25 A
• Rated insulation voltage Ui
  500 V
• Ambient temperature, maximum
  +90 °C
• Degree of protection
  IP65 to EN 60529
• Ambient temperature, minimum
  -30 °C
• Diameter of Castor
  36 mm
• Height of sensor
  163 mm
• Width of Castor
  9 mm
• Width of sensor
  194 mm
• Wire cross-section
  11 AWG
• Length of sensor
  190 mm
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Cable section, maximum
  4 mm²
• Cable section, minimum
  1.5 mm²
Note (Actuating speed)
Actuating speed with vertical actuating angle to switch axis
Terminal Connector
Screw connection
Actuating speed, maximum
3 m/s
Actuating speed, minimum
0.1 mm/min
Actuation direction
each time 60° right-hand side and left-hand side rotation
Contact opening
2 x 4 mm
Actuating angle, from right of switch axis
30 °
Enclosure material
Grey cast iron, galvanised
Actuating element
Roller lever
Actuating angle, from left of switch axis
30 °
Slide form
Castor
Mechanical life, minimum
30,000 Operations
Standards
EN 60947-5-1
Number of NC, left
2
Number of NO, left
1
Number of NO, right
1
Active principle
mechanical
Number of NC, right
2
Gross weight
5,635 g
Enclosure coating material
painted
Material of the contacts, electrical
Silver
Roller material
Plastic

M2A 471-12/12Y Related Documents