AZM400Z-ST2-I1-2P2P-T-E Schmersal Safety Switch Interlocks

Product Details

• Note
  The diagnostic output are not safety relevant outputs!
• Versions
  short-circuit proof, p-type
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Voltage drop Ud, maximum
  2 V
• Voltage, Utilisation category DC12
  24 VDC
• Current leakage Ir
  1.5 mA
• Rated operating current (safety outputs)
  250 mA
• Allowable discrepancy time (input), maximum
  10 s
• Classification ZVEI CB24I, Sink
  C1, C2
• Classification ZVEI CB24I, Source
  C2
• Switching thresholds of the control inputs
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Minimal average cycle time (with continuous operation)
  20 s
• Open / close cycle (Motor), minimum
  3
• Switching frequency, approx.
  0.3 Hz
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Operating current
  50 mA
• Rated operating voltage
  24 VDC
• No-load supply current I0
  100 mA
Current consumption at 24V, maximum
15 mA
Current consumption at 24V, minimum
10 mA
Current consumption, maximum
600 mA
Operating Current
100 mA
Degree of pollution to VDE 0100
3
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Overvoltage category
III
Rated insulation voltage Ui
32 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Protection rating
III
Length of sensor
65.3 mm
Restistance to shock
30 g / 11 ms
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-40 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Ambient temperature, minimum
-20 °C
Ambient temperature, maximum
+55 °C
Height of sensor
166.7 mm
Note (Lateral force at bolt return)
Does not apply to emergency exit, Bowden cable and manual release
Width of sensor
77.8 mm
Tightening torque of the screw
8 Nm
Terminal Connector
2 connector M12, 8 and 5 pin
Lateral force at bolt return, maximal (against locked door)
300 N
Clamping force, maximum Fmax
13,000 N
Clamping force in accordance with ISO14119 Fzh
10,000 N
Minimum distance devices
30 mm
Active principle
Magnetic field, RFID
Note (Mechanical lifetime)
Which have a lateral force Ftrans = 100 N: 100.000 operations
Mechanical life, minimum
1,000,000 Operations
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
general information
Individual coding
Interlocking principle
bistable
Number of safety contacts
2
Safety functions
Yes
Reaction time, maximum
100 ms
Number of diagnostic signals
2
Integral System Diagnostics, status
Yes
Electronic manual release
Yes
Short-circuit recognition
Yes
Time to readiness, maximum
1,500 ms
Enclosure material
Light alloy die-casting
Emergency exit
Yes
Short circuit detection
Yes
Guard locking monitored
Yes
Coding level according to ISO 14119
High
Gross weight
774 g

Related documents AZM400Z-ST2-I1-2P2P-T-E Specs