AZM300Z-ST-1P2P-A-T Schmersal Safety Switches

Product Details

• Current, Utilisation category DC12
  0.05 A
• Test pulse interval, typical
  1000 ms
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Voltage drop Ud, maximum
  4 V
• Versions
  short-circuit proof, p-type
• Classification ZVEI CB24I, Source
  C2
• Test pulse duration, maximum
  0.5 ms
• Current consumption at 24V
  5 mA
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Current consumption with solenoid ON, average
  200 mA
• Rated insulation voltage Ui
  32 VDC
• Note (Relative humidity)
  non-condensing, non-icing
• Voltage, Utilisation category DC12
  24 VDC
• Current leakage Ir
  0.5 mA
• Test pulse interval, minimum
  100 ms
• Classification ZVEI CB24I, Sink
  C1, C2
• Duty cycle solenoid
  100 %
• External wiring and device fuse rating
  2 A gG
Switching frequency, maximum
0.5 Hz
Required rated short-circuit current to EN 60947-5-1
100 A
Notes (Power supply, general)
stabilised PELV power supply
Operating voltage, maximum
26.4 VDC
No-load supply current I0
100 mA
Operating voltage, minimum
20.4 VDC
Degree of pollution to IEC/EN 60664-1
3
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Restistance to shock
30 g / 11 ms
Storage and transport temperature, minimum
-10 °C
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Relative humidity, maximum
93 %
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Height of sensor
55 mm
Storage and transport temperature, maximum
+90 °C
Ambient temperature, maximum
+60 °C
Width of sensor
87.5 mm
Ambient temperature, minimum
+0 °C
Length of sensor
146 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Length of sensor chain, maximum
200 m
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance OFF Sar
20 mm
Tightening torque for the fixing screws, maximum
7 Nm
Switch distance
2 mm
Latching force, adjustable, position 2
50 N
Tightening torque of the fixing screws, minimum
6 Nm
Ensured switch distance ON Sao
1 mm
Type of the fixing screws
2x M6
Latching force, adjustable, position 1
25 N
Clamping force, maximum Fmax
1,500 N
Clamping force in accordance with ISO14119 Fzh
1,150 N
Mechanical life, minimum
1,000,000 Operations
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Angular offset between interlocking device and actuator, maximum
2 °
Number of fail-safe digital outputs
2
Integral System Diagnostics, status
Yes
Safety functions
Yes
Frequency band RFID
125 kHz
Series-wiring
Yes
Time to readiness, maximum
5,000 ms
Short-circuit recognition
Yes
Emergency exit
Yes
Latching
Yes
Short circuit detection
Yes
Guard locking monitored
Yes
Coding level according to ISO 14119
Low
Gross weight
610 g
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
general information
Universal coding
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Transmit power, maximum
-6 dB/m
Duration of risk, maximum
200 ms
Active principle
RFID

AZM300Z-ST-1P2P-A-T Related Documents