AZM300Z-I2-ST-SD2P-T Schmersal Safety Switches

Product Details

• Wiring capacity
  50 nF
• Test pulse interval, typical
  1000 ms
• Versions
  short-circuit proof, p-type
• Current, Utilisation category DC13
  0.05 A
• Current, Utilisation category DC12
  0.05 A
• Current leakage Ir
  0.5 mA
• Voltage, Utilisation category DC12
  24 VDC
• Voltage drop Ud, maximum
  4 V
• Classification ZVEI CB24I, Sink
  C1, C2
• Classification ZVEI CB24I, Source
  C2
• Test pulse interval, minimum
  100 ms
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Duty cycle solenoid
  100 %
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Switching frequency, maximum
  0.5 Hz
• No-load supply current I0
  100 mA
• Notes (Power supply, general)
  stabilised PELV power supply
• Operating voltage, maximum
  26.4 VDC
• Degree of pollution to IEC/EN 60664-1
  3
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Restistance to shock
30 g / 11 ms
Rated insulation voltage Ui
32 VDC
Note (Relative humidity)
non-condensing, non-icing
Storage and transport temperature, maximum
+90 °C
Ambient temperature, maximum
+60 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Ambient temperature, minimum
+0 °C
Length of sensor chain, maximum
200 m
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance ON Sao
1 mm
Width of sensor
87.5 mm
Length of sensor
146 mm
Number of fail-safe digital outputs
2
Clamping force, maximum Fmax
1,500 N
Ensured switch distance OFF Sar
20 mm
Switch distance
2 mm
Angular offset between interlocking device and actuator, maximum
2 °
External wiring and device fuse rating
2 A gG
Current consumption with solenoid ON, average
200 mA
Operating voltage, minimum
20.4 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Overvoltage category
III
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Storage and transport temperature, minimum
-10 °C
Relative humidity, maximum
93 %
Height of sensor
55 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Tightening torque of the fixing screws, minimum
6 Nm
Tightening torque for the fixing screws, maximum
7 Nm
Type of the fixing screws
2x M6
Latching force, adjustable, position 2
50 N
Latching force, adjustable, position 1
25 N
Clamping force in accordance with ISO14119 Fzh
1,150 N
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Integral System Diagnostics, status
Yes
Mechanical life, minimum
1,000,000 Operations
Safety functions
Yes
Series-wiring
Yes
Emergency exit
Yes
Operation current
150 mA
Voltage, Utilisation category DC13
24 VDC
Current consumption at 24V
5 mA
Test pulse duration, maximum
0.5 ms
Short-circuit recognition
Yes
Latching
Yes
Short circuit detection
Yes
Serial diagnostics
Yes
Guard locking monitored
Yes
Power to unlock
Yes
Gross weight
660.1 g
Time to readiness, maximum
5,000 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Coding level according to ISO 14119
High
general information
Individual coding, multiple teaching
Duration of risk, maximum
200 ms
Frequency band RFID
125 kHz
Transmit power, maximum
-6 dB/m
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Active principle
RFID

AZM300Z-I2-ST-SD2P-T Related Documents