AZM300Z-I1-ST-SD2P-A Schmersal Safety Switch Interlocks

Product Details

• Test pulse interval, typical
  1000 ms
• Classification ZVEI CB24I, Source
  C2
• Current leakage Ir
  0.5 mA
• Test pulse duration, maximum
  0.5 ms
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Duration of risk, maximum
  200 ms
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Wiring capacity
  50 nF
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC12
  24 VDC
• Versions
  short-circuit proof, p-type
• Voltage drop Ud, maximum
  4 V
• Current consumption at 24V
  5 mA
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse interval, minimum
  100 ms
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Duty cycle solenoid
  100 %
• Current consumption with solenoid ON, average
  200 mA
• Switching frequency, maximum
  0.5 Hz
External wiring and device fuse rating
2 A gG
Required rated short-circuit current to EN 60947-5-1
100 A
Notes (Power supply, general)
stabilised PELV power supply
Current consumption with solenoid ON, peak
350 mA / 200 ms
Degree of pollution to IEC/EN 60664-1
3
No-load supply current I0
100 mA
Operating voltage, maximum
26.4 VDC
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Protection rating
III
Operating voltage, minimum
20.4 VDC
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Storage and transport temperature, maximum
+90 °C
Relative humidity, maximum
93 %
Ambient temperature, maximum
+60 °C
Note (Relative humidity)
non-condensing, non-icing
Storage and transport temperature, minimum
-10 °C
Ambient temperature, minimum
+0 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Height of sensor
35 mm
Operation current
150 mA
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Length of sensor
120 mm
Width of sensor
87.5 mm
Ensured switch distance OFF Sar
20 mm
Terminal Connector
Connector M12, 8-pole, A-coded
Length of sensor chain, maximum
200 m
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Ensured switch distance ON Sao
1 mm
Tightening torque for the fixing screws, maximum
7 Nm
Switch distance
2 mm
Type of the fixing screws
2x M6
Clamping force in accordance with ISO14119 Fzh
1,150 N
Latching force, adjustable, position 2
50 N
Tightening torque of the fixing screws, minimum
6 Nm
Latching force, adjustable, position 1
25 N
Clamping force, maximum Fmax
1,500 N
Angular offset between interlocking device and actuator, maximum
2 °
Number of fail-safe digital outputs
2
Series-wiring
Yes
Integral System Diagnostics, status
Yes
Mechanical life, minimum
1,000,000 Operations
Safety functions
Yes
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Short-circuit recognition
Yes
Latching
Yes
Short circuit detection
Yes
Manual release
Yes
Serial diagnostics
Yes
Guard locking monitored
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Power to lock
Yes
Time to readiness, maximum
5,000 ms
Frequency band RFID
125 kHz
Standards
EN ISO 13849-1, EN ISO 14119, IEC 60947-5-3
general information
Individual coding
Active principle
RFID
Transmit power, maximum
-6 dB/m
Coding level according to ISO 14119
High
Gross weight
550 g

AZM300Z-I1-ST-SD2P-A Related Documents